Can Electric Trailer Brakes be Added to a Harbor Freight Kit Trailer
Question:
Will these trailer brakes work on this harbor freight trailer? 90154 Or this trailer? 69897 It might be overkill but Im gonna make a tear camper out of this trailer and it will be towed up and down the big mountains of the west. Thanks.
asked by: Chris
Expert Reply:
Neither of those Harbor Freight trailers has brake mounting flanges on the spindles. To add electric brakes you would have to have brake mounting flanges welded on. This is a precision job that requires a special jig and someone with experience in welding on flanges. I have included a link to the flanges we carry to the right.
You would also need to replace the idler hubs on the trailer(s) with hub and drum assemblies. The problem with that is the Harbor Freight trailers use uncommon bearings so hub and drum assemblies are not available unless through Haul Master, the manufacturer of the trailers.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Search Results: electric brake controller
- Shop: Trailer Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Hayes Syncronizer Trailer Brake Controller - 1 to 2 Axles - Time Delayed
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Video: Redline Trailer Brakes 4-34 Review
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Which Direction Does the Brake Flange 4-34 Face When Mounted?
- Search Results: brake flange
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Search Results: brake controller
- Video: Dexter Electric Trailer Brake Kit Installation
- Search Results: weld on brake flange
- Search Results: 7 pin trailer plug
- Search Results: trailer brake mounting flange
- Search Results: electric trailer brakes
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2021 Hyundai Palisade
- Q&A: Recommended Trailer Hitch And 4-Pole Wiring Harness For A 2022 Hyundai Kona Electric
- Q&A: Trailer Hitch for 2018 Hyundai Kona and 2019 Kona Electric
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Q&A: Will 3500 Pound Dexter Axle with Hub/Drums and Electric Brakes Fit Harbor Freight Trailer 69897
- Q&A: Can Larger Tires with Brakes Be Installed On a Harbor Freight Folding Trailer
- Article: What is Boondocking
- Shop: Front Mount Hitch