etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
(0 reviews)
Price: $239.12
In Stock
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e53KR
Retail:$320.79
Our Price: $239.12
You Save: $81.67
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Q & A (0)
- Photos
etrailer Trailer Hitch - e53KR
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- Visible Cross Tube
- etrailer
- 900 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum tongue weight: 900 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e53KR etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
This Product Fits The Following Vehicles
- 2016 - 2024 Volvo XC90
- 2021 - 2024 Volvo XC90 Recharge
Tech Tip
Heat shield needs to be temporarily removed and trimmed. Skid shield, if present, may need to be permanently removed or modified. Drilling required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Exhaust must be temporarily lowered for installation , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately
Customer Satisfaction Score:
82% were satisfied with this product
18% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- etrailer mistake
by: Michael C05/11/2020
Love this hitch. I installed it on my 2019 XC90 Volvo T5. It is a perfect fit. The Volvo Dealership (here in San Diego) sells the $2,200 option including labor and that just seemed to high to me and probably to you for a hitch, even if it is a motorized hitch. I want to add a few personal notes that you may find helpful. I was so happy with this I am planning on getting the hitch for my wife’s 2019 XC60.
1. Do watch the video on the site twice. I was very helpful. I actually had it nearby during the installation. Much easier than reading the paper.
2. I used a 19mm socket on the 1/2” bolts that are provided. That was not detailed anywhere although you could figure it out. But if you are like me and needed to buy some tools that is what fits.
3. There are already holes in the frame that you can use to feed the hardware through (near the axle). You might need to extend the feeder wires to use them but it saves you drilling the larger hole to get the hardware in. You will see it when you are under the car. I didn’t take the picture.
4. If you don’t have them you can easily buy drive on ramps (for pretty cheap) to raise up your vehicle enough to do this job safely. They gave plenty of safe room to work.
5. The trim for the heat shield instructions in the video mostly apply. You will need to do a little extra than what they suggest on the 2016 model in the video
6. MAKE SURE you have the muffler hangers attached to the muffler before you do final assembly. I took mine off for ease of testing the fit and marking the holes to drill. I didn’t put them back on before final install and what a difficult time I had getting them back on. You don’t want to drop the hitch because you might lose your 1/2” bolt.
Other than that I love it. Could not be happier.
Thanks
by: John P01/16/2024
Great that it didn't need to cut or adjust bumper. Sits a little low, but hitch ball and assembly can be bought to sit high. Not very noticeable. Really have liked it.
by: Joseph09/25/2022
Overall, great product considering the alternative from the Volvo dealer is literally 10x as much.
A few notes though, I'm reasonably good with a wrench and have installed several hitches over the years. This one was the hardest, and took me 3 hours, not 2 as listed in the instructions for a novice.
I have a 2022 XC90 so the heat shield may have changed a little, but more cutting is required, especially around the rearward bolt, than described in the instructions. Also, the instructions never tell you to reinstall the heat shield, so don't forget that!
You don't have to remove the bumper cover, you can wiggle the heatshield out without removing. In new cars with parking sensors, they are a pain to remove.
Finally, the kit would have more complete if 4 small bolt retainers were included. These look like little toothed plastic washers that would hold the captured bolt in place while you are reinstalling the 45 pound hitch over your head on your back. Instructions say to use the fish tape to thread through the bolt holes in the hitch, but I think you would need 3-4 people under the car to make that happen. I only had a 15 year old helping me.
Again, great product, would buy again, but not a simple install.
by: Tony Y08/16/2022
Trailer has worked very well and made hauling bikes much easier! Thanks for the great support during the installation process!
by: William 05/31/2023
The Curt Trailer Hitch is very solid/strong. Well manufactured. The installation video is excellent although it takes closer to three hours to install and best to have a helper.
by: Tim 06/13/2023
To install is no need for a bigger hole, 5 inches to the front of the car is a big hole from the factory. Is what I used. For the back bolts I extend the rod on the coil wire.
by: Cody06/18/2022
Great product, very good quality. The video instructions on the website were spot on. Had to buy a large step up drillbit which was 75 bucks at Home Depot but other than that it was pretty easy. Only other tip would be to trim a little bit more than you think you’ll need to from the heat shield before you put it on. It looks great on my 2020 XC 90.
by: Hubert07/09/2020
The representative displayed complete professionalism! She was very informative and helpful. This customer experience leaves me feeling very happy with Furture purchases from etrailer down the line .
by: Jay 12/05/2021
The product looks and works great. The install Video was easy to follow along and pretty much applied to my 2019 Volvo XC 90.
by: James 11/17/2021
very good hitch, works like it supose too. Was easy to install.
by: Matt02/05/2022
Working as a hitch should!
by: James C12/14/2023
by: Joseph 08/28/2022
by: Chad 07/22/2021
by: Chris02/05/2022
by: Kirk 10/19/2020
16
16
See what our Experts say about this etrailer Trailer Hitch
- Does etrailer Trailer Hitch Receiver Require Drilling to Install on 2019 Volvo XC90You do not have to remove the bumper, but you do have to remove the rear fascia and drill into the frame of your 2019 Volvo XC90 to install the etrailer Trailer Hitch Receiver # e53KR. There are no hitches for your XC90 that you can install without either drilling or removing the bumper or rear fascia. You'll just have to drill a pair of 9/16" holes to install the # e53KR, but if you do not want to do any drilling at all - but are okay with removing the rear bumper temporarily - then I...
view full answer... - Trailer Hitch Receiver For a No Drill Installation On a 2016 Volvo XC90The etrailer Trailer Hitch Receiver # e53KR will require you to drill holes for mounting to your frame on your 2016 Volvo XC90. It will also require the enlargement of other existing holes to install the square bolt spacers. For a no drill installation I recommend the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH27FRT. The Stealth receiver allows you to remove either the 2" receiver or the ball mount for a cleaner look without the low hanging assembly like you get with...
view full answer... - Curt vs. etrailer Trailer Hitch For 2023 Volvo XC90 RechargeJust a single difference exists between the Curt and etrailer trailer hitches for your 2023 Volvo XC90 Recharge, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you prefer. The hitches that fit your '23 Volvo XC90 Recharge are the following part numbers: - Curt Trailer Hitch Receiver # C13233 - etrailer Trailer Hitch Receiver # e53KR The matte black finish does hide those inevitable small scuffs...
view full answer... - Which is The Best Receiver and Which is The Easiest To Install On a 2017 Volvo XC90?The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH27FRT is going to be the best receiver for your 2017 Volvo XC90. This allows you to remove the receiver tube or ball mount when not needed providing you a clean factory appearance. It also includes the trailer wiring needed for adding a 7-way trailer connector which will integrate into the factory wiring. This is a more difficult install than one like our etrailer Receiver # e53KR as it will involve removing the rear bumper...
view full answer... - Installation Video for the Curt Trailer Hitch item # C13233We haven't made one because we haven't had a 2023 Volvo XC90 in the shop. The Curt Trailer Hitch item # C13233 is the same hitch as the etrailer item # e53KR it just has a different finish. I have linked an installation video we did awhile back on it being installed on a earlier model XC90. I have also attached the installation instructions for both hitches below. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
view full answer... - Which Trailer Hitch Receiver Fits 2023 Volvo XC90The # C53HR fits the 2016-2020 Volvo XC90. For a hitch that fits the 2023 I recommend the # e53KR. This features a bolt-on installation, matte black finish, and a limited lifetime warranty. However, it does have a visible cross tube. If you would rather not have that cross tube hanging down under your vehicle, I recommend the Hidden Hitch by Draw-Tite # DT82GR. Not only is the cross tube hidden, with the removable receiver it has a completely hidden design when not in use. I have attached...
view full answer... - Can a Weight Distribution System Be Used on a 2018 Volvo XC90It does not matter which trailer hitch option you choose for a 2018 Volvo XC90, I recommend the etrailer Trailer Hitch Receiver part # e53KR, you cannot use a weight distribution system and the reason for this is the unibody construction. The unibody cannot handle the stress of a weight distribution system but this is not just the case for this vehicle but every vehicle with a unibody. Unfortunately, we don't have any options to help with read end support on this vehicle but if you were...
view full answer... - Hitch Confirmed to Fit the 2022 Volvo XC90We do! The etrailer Trailer Hitch Receiver # e53KR is confirmed to fit your 2022 Volvo XC90. This hitch has a bolt-on installation (some drilling required) and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing with your XC90, you can pick up the T-One Vehicle Wiring Harness # 118683 and the etrailer Ball Mount Kit # 989900 to round out a tow package.
view full answer... - What Hitch Receiver Fits My 2022 Volvo XC90?Yes! We have a great hitch that fits your 2022 Volvo XC90. That hitch is the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e53KR. It comes with a complete hardware kit for a weld-free installation, although minor drilling is required. This hitch also happens to fit the 2021 XC90 model as well.
view full answer... - Fit of etrailer e53KR Class III Hitch on 2021 Volvo XC90 Inscription RechargeThe etrailer # e53KR Class III hitch fits all models of the 2021 Volvo XC90, including the Inscription Recharge. The install procedure shown in the linked video for the 2019 XC90 would be the same as the 2021. If you'll be using the hitch for towing purposes, you'll also need a trailer wiring harness like # 118683, a ball mount like # D-28, a # PC3 hitch pin and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch. I've also linked to an install video for the trailer wiring harness.
view full answer... - Will etrailer Hitch for 2021 Volvo XC90 work with Hands Free LiftgateWe've had customers install the etrailer hitch part # e53KR on the 2021 Volvo XC60 and let us know that the hands-free function still worked. They said the spot they had to move their foot was on the driver side of the hitch.
view full answer... - Recommended Hitch for a 2024 Volvo XC90 RechargeYes, we do! To add a hitch to your 2024 Volvo XC90 Recharge, I recommend the etrailer item # e53KR. This hitch is custom fit and bolts to your Volvo with included hardware. This is a class III hitch with a 2" receiver. I have linked the installation instructions below so you can see how to get this hitch set up. If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount kit item # C45534.
view full answer... - Recommended Trailer Hitch and Wiring For A 2022 Volvo XC90Yes, the etrailer Trailer Hitch Receiver # Item # e53KR will fit your 2022 Volvo XC90. This trailer hitch has a maximum towing capacity of 6,000-lbs, a maximum tongue weight capacity of 900-lbs, and is made in the USA. If you're interested in completing your towing setup, you're also going to need wiring # 118683.
view full answer... - Best Trunk-Mounted Bike Rack To Transport 3 Bikes On A 2021 Volvo XC90The Yakima HangOut 3 Bike Rack - Trunk Mount - Adjustable Arms # Y02638 that you mentioned is the only 3-bike rack that is confirmed to fit the trunk of your 2021 Volvo XC90. This is the bike rack I recommend going with as there are not any 4-bike carriers for the trunk of your vehicle at this time. This attaches to the top of the trunk with the included straps and will not interfere with any roof rack / crossbars. I also think it's a great idea to add Security Strap # Y02623. One end...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Test Fit:
Jacob H
Video by:
Thomas T
Written by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.