TorkLift Camper Tie-Downs - Custom Frame Mount - Front
(1643 reviews)
Price: $465.45
In Stock
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Our Price: $465.45
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1643)
- Q & A (0)
- Photos
TorkLift Camper Tie-Downs
- Front Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with rear tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
F2022 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
Item # TLF2022
This Product Fits The Following Vehicles
- 2019 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2019 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2019 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a Torklift SuperHitch Magnum 30k
- 2017 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2017 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2017 - 2022 Ford F-250 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Magnum 30k
- 2019 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2019 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2019 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a Torklift SuperHitch Magnum 30k
- 2017 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2017 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a non-Torklift aftermarket hitch
- 2017 - 2022 Ford F-350 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a Torklift SuperHitch Magnum 30k
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLF2022
Average Customer Rating: 4.7 out of 5 stars (1639 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Robb 03/28/2024
2020 Ford F-250 Super Duty
After looking at other camper mount options I am glad I went with the TorkLifts. These are absolutely a heavy duty mounting system. They bolted to the frame of my 2020 F-250 Superduty using factory frame holes. Every thing needed came in the box. The install was fairly easy. I installed the front and rear mounts in less than 3 hours. Read all the instructions first before you start. I would recommend these mounts. They are a true frame mounted tie down system. My camper was expensive. I am so glad I did not go cheap on the tie down system.
by: Cole08/08/2023
Great product but drivers side hole F on directions is none existent on the 2023 f250. Not sure if it’s safe to use being that the passenger side has the same issue but they supply an extra bracket that utilizes another factory hole so it’s got more support. Needs to be updated for 2023 models.
by: Israel 01/23/2024
This is my second set for the TorkLift tie-downs, and I would not use any other type. We use it daily; our camper never comes off as we are constantly on the move. In the event we have to remove it for vehicle service such as alignment, it is easy to remove and get back on.
by: Jason11/01/2020
Installed on my 2020 F250 Supeduty, they were easy to install. They were missing a few pieces of hardware but etrailer got the parts shipped out the next day. The front driver side plate did take a little puzzle like twisting to get around the brake lines but wasn’t really that difficult. I also purchased the rear tie downs and they are even easier to install. The front and rear took about 3 hours total to install. I only needed to buy a 32mm socket for the suspension bolt.
by: Dustin04/26/2022
Perfect fit. Very strong and secure. The leaf spring bolt on my 2017 F350 could only be loosened by a local diesel mechanic. The Ford dealership and corporate repair shops wouldn’t loosen it for me due to their liability concerns. The bolts that you need to feed through with the wire leads are a bit tricky. Be sure you have something like vise grips to clam onto the bolt once it is in place before you remove the wire. You don’t want it to drop back down into the frame. You also need to hold onto the end of the bolt while you hand tighten the nut until the star washer can bite enough to keep it from spinning. Then you can crank it down with your ratchet. All in all, the instructions were very good and complete. I was able to do the installation myself with just the one trip to get the passenger side leaf spring bolt started. I look forward to many years of camping with my unit securely tied down to my truck. Thanks!
by: Tod09/10/2021
I have a 2022 Ford F-250 super can. The frame mount tie downs went on great. You have to loosen leaf spring bolts to install brackets, passenger side bolt is 1 3/16 and drivers side is 1 1/4 so plan ahead. Need 3/4 drive brake bar too. Everything else was easy install. Nice strong mounts. I like them.
by: Wayne 02/08/2024
I have done business with etrailer several times. The products are always as advertised and never arrive with disappointments. Everything comes in a timely manner and the company communicates well. Right after I received this latest shipment I discovered something else I needed on the truck I had just purchased. So back to etrailer I went and sent another order. Repeat orders lets you know that this is a good company to deal with.
by: Les08/16/2018
2017 Ford F-250 Super Duty
I haven’t used these with my camper but I think I will be happy with the outcome. The install was more difficult than I hoped. The passenger front mount went on easy. I did buy a long 6 inch bolt to go all the way through the frame. I read afterwards that you can turn the washer 45 degrees to get it though the first hole in the frame. The drivers side was a huge issue. The gas tank on the 2017 super duty is against the frame so it was impossible to get a bolt through without removing the tank. The hole at the bottom was too small and didn’t line up with the top bolt. I could of drilled all the way through the fre but was afraid of puncturing the plastic gas tank. So the simplest fix was to buy a 3/8 drill and tap. I drilled a hole in the frame down low and taped it out and installed a bolt with 3/8 threads. It worked fine but I didn’t really want to drill a hole in the frame of my new truck. If I had it to do over, I would have it professionally installed and gladly paid up to 300 to not have to hassle with it. I included a pic of the bolt I drilled and taped in the frame. It wouldnt be too bad of a job if I knew from the beginning what I needed. If you are not moderately mechanical don’t even try this install yourself. The technical support number was a joke don’t waste your time. I also had to buy a 1 1/4 “wrench and 1 3/8” socket. You gotta hammer it loose with a small sledge. Or you can impact it off with a deep 1 1/4 socket. I just couldn’t find the deep socket I needed at the nearest Lowes.
by: John09/24/2023
The packages came in yesterday but were missing the locking clamps that hold the slide in bar in place, only on the front order was missing not the backs. I dropped from excellent because of the missing parts.
Jenny N.
9/26/2023
Oh no! I will have our Customer Service team reach out to you.
by: Bill 12/27/2023
Very well designed. Instructions are good. Took me about 3 hours to install front and rear tie downs.
by: Brad T03/25/2018
Magnum 30K & Camper Tiedowns TLF2022 & TLR3504
by: Todd12/08/2023
Love these. I wish there was some cool end caps to go with them.
by: Michael04/18/2024
They do the job that they claim to do, glad I bought them
by: Jason09/07/2023
These are the best tie down system. Getting the spring hanger bolt loose was a bit of a chore but once that was done tie down frame went on quickly. 2017 F350
by: Jeremy 07/11/2022
Second truck I have used these on. I would not trust any other Tie-Downs
Jeremy
7/12/2023
I am very satisfied with the quality of these. I would highly recommend them!
by: Ruth A09/22/2023
2019 Ford F-250 Super Duty
ETrailer has always been a reliable business to work with. They stand by their products and go out of their way to ensure customer satisfaction.
by: Travis 11/11/2023
Takes a bit to fish gthe bolts through but other than that everything lined up and works perfectly. The cover paint flaked a bit during install but definitely a quality product. Thank you etrailer
by: Paul 04/17/2024
Great product and fast delivery!
by: Marcus 07/21/2022
We added these to help the camper sway on off road and they do the job.
Marcus
7/27/2023
Perfect. We use the Torklift to stop camper sway when traveling off road. Once the frame is mounted to the truck installation takes 30 seconds. I would suggest having a shop with a lift mount the frame which will stay on the truck.
by: George 03/23/2023
I actually purchased both front and rear tie down brackets for my truck and cab-over camper. I have had them installed over a year now and these tie downs are THE BEST. They remain stug and hold the camper securely in the truck bed from the truck frame. Solid.
by: Keith 09/05/2022
Ford F-250 Super Duty
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were easy to install on my own although the instructions go back and forth which is somewhat annoying, It would also be helpful if the hardware was labelled for a quicker install. The instructions called for the removal of the exhaust hanger on the passenger side but I don't have a hanger in that location on my vehicle.
by: Zac 06/03/2023
Ford F-350 Super Duty
The TLF2022 parts fit my 2022 F350 crew cab short box perfectly. I did have a local dealer install them as I didn't have the necessary socket/torque wrench on hand. They look and function as expected.
by: Ronald 04/13/2021
2020 Ford F-250 Super Duty
This is not an installation for anyone lacking automotive experience. The instructions could be better in some areas. It helps to leave the bolts off the fish wire until it is in place, and back fishing helps since the hole in the top of the frame is larger than the bolt holes. After an afternoon of cussing and fussing, the finished installation is great, with excellent fit.
Ronald
4/14/2022
The Torklift tie downs work great. Dont forget to wash the mud off of them too at the car wash.
by: Louie01/13/2022
etrailer's service is 5 Star, as usual. My issue is with Torklift's poor quality in packaging accuracy for attaching the product. The front frame mount's instructions are lacking. The rear receiver mount is missing a split washer. And, for the Derringer hold down, the 8 nuts for the threaded rods are the wrong thread size thus won't go on to the rods.
Thomas M.
1/13/2022
I will have Customer Service reach out to you.
by: Scuba06/26/2023
Everything fit perfectly, the company was very good to work with. I would buy again
25
1642
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Why are Frame Mounted Camper Tie Downs for 2018 Ford F-250 More ExpensiveBrophy has a stake pocket mounted tie down setup that fits your 2018 Ford F-250 short bed with the part # HSWB but the # HSSF you referenced is not listed as a fit. Stake pocket tie downs are more universal in the trucks they fit, are a simpler design, and not quite as secure as the frame mounted styles which is why the cost of them is lower. They work but in general people prefer the frame attachment style since it's a much more secure attachment as the frame of the truck is much stronger...
view full answer... - Are There Truck Bed Camper Tie Downs for a 2018 Ford F-350 Short Bed with Power Retractable StepsI know this is not what you want to hear as they are very nice and convenient but the power retractable running boards/nerf bars on your 2018 Ford F-350 are going to have to go if you want to use a set of frame mounted camper tie-downs which is what I recommend. The two just simply aren't compatible due to where they mount and the steps will have to be removed. Then, you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs, part # TLF2022 for the front and part # TLF3008 for the rear....
view full answer... - Do The TorkLift Camper Tie-Downs From A 2022 Ford F-350 Fit A 2023 Ford F-350 The 2022 and 2023 models of the Ford F-350 do both use the same TorkLift camper tie-downs. For your 6-3/4' bed you would need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2022 and rear # TLF3008. If you wanted the aluminum and stainless steel Talon versions of these you would need part # TLF2022A and # TLF3008A.
view full answer... - Turnbuckle Recommendation for 2017 Ford F-250 Camper Tie DownsThe TorkLift FastGun Turnbuckles part # TLS9526 that you referenced would be a great option. They are a frame mount option that would work well for your 2017 Ford F-250 with the # TLF2022 and # TLF3008.
view full answer... - Installation Video For TorkLift Front Mounted Camper Tie-Downs TorkLift doesn't have their instruction manuals posted online so I'm unable to find the exact step by step instructions, but I was able to find a video where Shane will walk you through installing a similar front mounted tie-down model to your # TLF2022 on a 2020 Ford F-250.
view full answer... - What is Most Secure Way to Attach Truck Bed Camper to 2019 Ford F-350 Short BedFor your 2019 Ford F-350 short bed without running boards and a factory hitch the best and safest tie down solution is the part numbers # TLF2022 and # TLF3008 from Torklift. Unlike other options this is a custom fit frame mounted tie down solution that will be the easiest to use and be the most secure. Last thing you'd need is a set of turnbuckles like the # TLS9529-2-LK which attach from the camper to the tie downs.
view full answer... - Can the TorkLift Frame-Mounted Tie-Downs Be Transferred From a 2017 F-350 to a 2019 F-350 DuallyFor starters, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2021 only work on models with an 8' bed so if you have the 6-3/4' bed then you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2022 instead. In regards to removal of the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2021, I asked TorkLift and they mentioned that using a magnet to retrieve the old hardware is your best option.
view full answer... - TorkLift Tie-Downs and Turnbuckles For a 2017 Ford F-250 with 6-3/4 Short BedI recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2017 Ford F-250 Super Duty with the 6-3/4' bed. You will need the Front # TLF2022 and Rear # TLF3008 tie-downs. The TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK have a stainless steel construction for corrosion resistance and includes locks to secure your slide in truck camper. The turnbuckles will extend from 25-43".
view full answer... - Torklift Camper Tie Down Recommendation for 2018 Ford F-250 6-3/4 foot BedThe Torklift tie down part # TLF2022 have been carried over to fit 2018 Ford F-250 Super Duty trucks. There are several variations of the truck that these are fit for, but in general it's versions of the vehicle without step boards, 6-3/4 foot bed. The part # TLF3008 is the matching rear tie down for the same options I listed previously.
view full answer... - Which TorkLift Tie Downs for 2019 Ford F-250 Super Duty LariatI'll start out by saying that the Hidden Power system is an aftermarket addition made by TorkLift that basically adds an auxiliary battery- so it's most likely that you don't have that on your 2019 Ford F-250. When it comes to the factory self deploying running boards, as long as they don't extend beneath the truck bed, there's nothing to worry about. When it comes to tie down mounts for your F-250, TorkLift is a great choice; they're well known for their quality and durable construction....
view full answer... - Front Camper Tie-Downs For 2020 Ford F-350 Crew Cab w/ Short Bed, TorkLift Hitch & Running BoardsThanks so much for the detailed information, and we do have the correct front camper tie-downs for your 2020 Ford F-350 crew cab with a 6-3/4 foot bed, cab-length running boards and TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1008-30. I checked with TorkLift for you and the correct no-drill front tie-downs are the following: - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2022
view full answer... - Recommended Truck Bed Camper Tie-Downs for a 2017 Ford F-250 with a 6-3/4 Foot BedFor a set of camper tie-downs confirmed to fit your 2017 Ford F-250, I recommend taking a look at the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2022 for the front and the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLR3500 if you have an aftermarket hitch or part # TLF3008 if you have a factory hitch for the rear. As long as you do not have wheel to wheel running boards/nerf bars and or truck bed steps, then both of the above tie-down options will work well for...
view full answer... - Is There Strength Difference Between Aluminum and Steel Torklift Tie Downs for 2022 Ford F-350Of the two part numbers you mentioned only the # TLF2022A is a fit for your 2022 Ford F-350 short bed without factory board and with the factory installed hitch. You might have meant to type # TLF2022 which is the non-aluminum/stainless steel option that fits your truck instead. Strength-wise these are going to be right at the exact same as they were rated designed to be just as strong as the other but using different material. They are able to do this by using different thickness of the...
view full answer... - What Are the Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2019 Ford F-350 The correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs to go along with the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLF1008-30 is part # TLR3504 for the rear and part # TLF2022 if you have a 6-3/4' bed or part # TLF2021 if you have an 8' bed for the front. For a set of tie-downs to use with these, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9529-2-LK. I have also attached a link with a list of TorkLift SuperTruss...
view full answer... - What Rear Tie-Down Fit With TorkLift SuperHitch Magnum On a 2023 Ford F-350 Super Duty? The TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1008-30 will allow you to mount either the Aluminum # TLR3504A or Steel # TLR3504 camper tie-downs on your 2023 Ford F-350. If you need the matching front tie-downs you will need to select the correct ones for either a 6-3/4' or 8' bed without a step under bed. 6-3/4' Bed Front Mount Aluminum # TLF2022A Steel # TLF2022 8' Bed Front Mount Aluminum # TLF2021A Steel # TLF2021
view full answer... - Will the TorkLift Camper Tie-Downs TLF2022 Fit a 2023 Ford F-350 or What Option is ThereNo, we have not heard or been able to confirm fitment of the TorkLift Camper Tie-Downs # TLF2022 (for 6-3/4' bed) for the 2023 Ford F-350. Currently the Brophy Slide In Camper Tie-Downs # HSWB are the only option that we have for the 2023 Ford F-350 with 6-3/4' bed. You would also need a set of turnbuckles to secure the camper to the tie-downs. - Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP
view full answer... - Recommended Trailer Hitch And Camper Tie Downs For 2019 Ford F-250 Towing Boat W/ In-Bed CamperFor your 2019 Ford F-350 Crew Cab I recommend using the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLF1008-30 to replace your factory trailer hitch receiver as it is already drilled for camper tie downs, and is compatible with the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long # TLE1521 or 42" # TLE1542 which will allow you to still tow your 5000lb boat. For camper tie downs you will need the # TLF2022...
view full answer... - Torklift Tie-Downs For 2018 Ford F250 Short Bed W/Factory Hitch And Running Boards Under BedFor your 2018 Ford F-250 Superduty, as long as your running boards are factory then I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front Item #TLF2022 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item #TLF3008. If your running boards are after market then there is no way to tell if the gap is going to be wide enough to allow the tie down to pass between the step and the body of the vehicle.
view full answer... - Torklift Tie Down Recommendation for 2017 Ford F-350 Short Bed with Factory HitchFor your 2017 Ford F-350 with factory hitch, running boards that stop at the cab and a short bed you would want the Torklift Camper Tie Downs part # TLF2022 and # TLF3008 which are a confirmed fit for that setup and would work well.
view full answer... - Correct Torklift Turnbuckles For A 2020 Ford F-350 6.75' Bed SupercabHello Joe. I can definitely help get you set up with Torklift Camper Tie Downs for your 2020 Ford F350. Does your truck have a trailer hitch installed on the back? If so, was it installed from the factory or aftermarket? Let me know because that will determine the correct rear tie downs. The # TLF2022 front tie downs will be correct for your truck. The rear tie downs will be determined by the type of trailer hitch on your truck. The # TLR3500 are for trucks with a non-Torklift brand aftermarket...
view full answer... - Installation of Bolt for TorkLift Camper Tie Down TL2022 Where Star Washer Won't GripI was able to reach out to my tech contact over at TorkLift to get some guidance on the installation of the TorkLift Front Tie-Down # TLF2022 for you. He mentioned that you'll want to apply pressure to the tie-down (pull it down a little bit) or to the bolt threads so that the star washer stops the bolt from spinning- you can use some channel locks and a rag to save the thread or use a screwdriver against the threads so that it doesn't spin. He also mentioned that if you have an impact...
view full answer... - TorkLift Custom Frame-Mounted Camper Tie-Downs 2017 Ford Super DutyFor a 2017 F-250 Super Duty with an 6-3/4' bed the needed tie-down for the front is, # TLF2022 or the # TLF2021 for an 8' bed. This is different than the needed front tie-down for a 2017 Ram which would use the, # TLD2127 be it a short or long bed Ram. For the 6-3/4' or 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch you would want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, # TLF3008
view full answer... - What is Weight Difference Between Aluminum and Steel Torkflift Camper Tie Downs TLF2022A TLF2022The weight is pretty similar between the aluminum Torklift camper tie downs part # TLF2022A and the steel part # TLF2022 which is 4 lbs heavier at 39 lbs vs 43 lbs.
view full answer... - Aluminum and Steel TorkLift Camper Tie-Downs for 2019 Ford F-250 Super Duty With 6-3/4 Foot BedThere is a difference in price between the steel TorkLift Custom Frame-Mounted Camper Tie-Downs and the ones that are made from aluminum that fit your 2019 Ford F-250 Super Duty with a 6-3/4 foot bed, no boards or steps under the truck bed and either the factory hitch, SuperHitch Original 20K or SuperHitch Magnum 30K. You can find the prices on the individual product page, and to convert that to Canadian money you will need to use your favorite conversion source; I'll also send a link...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
David F
Written by:
Amanda M
Test Fit:
Jacob H
Updated by:
Isabelle B
Updated by:
Amanda K
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
8/15/2023
We reached out to Torklift and there is currently not a front tie down that will work without having to drill a hole in the frame. I will have our Customer Service team contact you.