Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 2

See what our Experts say about this Rhino Rack Accessories and Parts

• Rhino Rack Pioneer Tray Compatibility and Components for ARE Truck Cap with Factory Tracks
  You won't need any roof rack crossbars to mount a Pioneer Platform to your ARE cap with factory rail tracks. You will use the Rhino-Rack Universal Pioneer Platform Rack - 58" Long x 47" Wide # RR42115BF, the Rhino-Rack Quick Mount Legs # RRRLT600, and two sets of spacer blocks # RRQMHD05. I confirmed these parts with my tech contact at Rhino-Rack so you will be good to go
  view full answer...
  
• Rhino-Rack Pioneer Platform Rack for a 2009 Lexus GX 470
  The 60" x 49" Rhino-Rack Pioneer Platform Rack # RR35TB requires specific fit kits and is only compatible with certain vehicles. We do have a Pioneer platform rack that will fit the factory crossbars on your 2009 Lexus GX 470 but unfortunately this is not the correct part number. Instead you need to use the 58" x 47" Rhino-Rack Pioneer Platform Rack # RR42115BF which is a universal fit that is compatible with round, square, elliptical, and most factory crossbars. This rack features mounting...
  view full answer...
• Recommended Rhino-Rack Pioneer Platform Compatible with Yakima Tracks on 2017 GMC Canyon 5 ft Topper
  The Rhino-Rack Pioneer Platform # RR42115BF is one of the correct size for your 5 foot bed and topper. The platform will attach to your Yakima Aero bars without any problem. I reached out to my contact at Rhino Rack and you can absolutely install a platform directly to your tracks using Rhino-Rack Pioneer Platform Rack - 60" Long x 49" Wide # RR35TB, Legs # RRRLT600, 2 sets of spacer blocks # RRQMHD05, and adapter kit # RRT-FK3. This will be a clean look.
  view full answer...
• Rhino Rack Pioneer Platform that Fits 2018 Jeep Wrangler Unlimited
  The mounting kit needed to fit a Rhino Rack Pioneer Platform to the roof of a 2018 Jeep Wrangler Unlimited is the part # RRRJLB1 which you could potentially be used with the smaller Pioneer Platform # JA8688 but you are going to end up having to get the # RRQMHD05, the leg kit # RRRLT600 and the # RRRLT600H. I'd go with the larger # JB0893 though as it will fit and is the most cost effective solution. The picture I attached shows what the # JB0893 looks like installed.
  view full answer...
  
• Can 71" Rhino Rack Heavy Duty Crossbars Be Used with Thule or Yakima Tracks
  Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars are offered in lengths up to 71" using part # RB1800B-2. In order to use these with Yakima or Thule tracks you'll also need the Rhino-Rack Quick Mount Legs part # RRRLT600, Roof Rack Leg Spacer Blocks part # RRQMHD05, and the Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3. In regards to the Rhino-Rack Roof Rack for Thule and Yakima Tracks part # Y01-140B-NT, the max length is 65" so if you need longer you'll need to piece together...
  view full answer...
• How to Carry Three Kayaks on the Roof of a 2018 Chevrolet Equinox
  In order to fit three kayaks on the roof of your 2018 Chevrolet Equinox, you will first need a roof rack. In order to recommend one I would need to know if you have a bare roof with fixed mounting points or factory raised side rails. If you have the bare roof with fixed mounting points then I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of crossbars part # RRVA118B-2, mounting feet part # RRRCL4 , and fit kit part # RRRCP62-BK. If you have factory raised side...
  view full answer...
• Parts Needed to Add Single Rhino-Rack HD Roof Rack to 2006 GMC Sierra to Match Camper Shell Rack
  We can get your 2006 GMC Sierra extended cab set up with the matching 65 inch HD crossbar that come with the # Y01-140B system for your camper shell. To make it work the parts will need to be pieced out, but by adding each of them it will allow you to add the track-mounted rack system for your camper shell and a single-bar rack with a matching HD crossbar. The exact parts you will need to make this work for your '06 Sierra are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• How To Use Rhino-Rack Heavy Duty Crossbars On a Pace Edwards Tonneau Cover with Thule/Yakima Tracks
  Yes, you can use a Rhino-Rack Roof Rack with the Thule/Yakima tracks on the Pace Edwards Metal Ultragroove Retractable Tonneau Cover. I have listed the parts you need below: Rhino-Rack Quick Mount Legs part # RRRLT600 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK3 (Yakima) part # RRT-FK1 (Thule) Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 (2).
  view full answer...
• Rhino Rack Tower and Crossbar Compatibility with Thule Factory Installed Tracks on Truck Cap
  Yes. The Thule tracks will accept the Rhino-Rack feet and crossbars. The kits like the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long # Y02-480B-NT will work well, or you can piece together the parts you desire. The really nice aspect of Rhino-Rack towers is they come with the included locks and are great quality at a really good price point. To piece together your kit, you will use the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC...
  view full answer...
  
• Will Yakima HD Crossbars Work With Rhino-Rack Mounting Legs RRRLT600
  The Yakima HD Crossbars won't work with Rhino-Rack Mounting Legs part # RRRLT600 but they do offer the very similar Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 which will work if used with the Roof Rack Leg Spacer Blocks part # RRQMHD05.
  view full answer...
• Rhino-Rack Crossbars For a Roll-N-Lock Cover On a 2022 Jeep Gladiator
  The legs of the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT will fit the t-tracks of your Roll-N-Lock XT cover. We have had customers in the past use this in that fashion. The issues would come from the length of the crossbars. We have not fit the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT (65" crossbars) on a Jeep Gladiator, they are typically more for full size trucks. However, we have fit the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500B-2...
  view full answer...
  
• Installing Rhino Rack Pioneer Platform on Travel Trailer
  Since your 2020 No Boundaries 16.2 travel trailer came with Rhino Rack roof channels the parts you'd need to install a larger Rhino Rack Pioneer Platform tray are # RR42113BF, # RRQMHD05 (3 sets), and # RRRCL6 and you'd be set.
  view full answer...
• Parts Needed to Install Rhino Rack Pioneer Platform on Vehicle with Roof Tracks
  If you were looking for a 6 pack of feet that can attach to the Rhino Rack Pioneer Platform part # RR45TB you'd want the # RRRCL6 and then 3 sets of the spacer kit part # RRQMHD05 for a way to attach the setup to roof tracks or "channels" like it sounds like you are looking to do. The parts you mentioned are not going to work ideally which is why I would not recommend them for you.
  view full answer...
• Is it Possible to Have a Single Crossbar on my Camper with Tracks and a Crossbar Mounted on My Cab?
  For having one 65-inch Rhino-Rack heavy Duty Crossbar on your camper shell's factory tracks and having one mounted on the cab of your 2018 Ford F-150, you need the following parts: For the single HD crossbar on the shell: - 65" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 For the single...
  view full answer...
• How To Level Rhino-Rack Heavy Duty Crossbars For Rooftop Tent
  If the tent is not level on your roof rack then your only solution is to install leg spacers to the side that is lower so that you tent will have a more leveled mounting surface. You can go with Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick - Qty 2 # RRQMHD05 which comes with two 5mm spacers, or 1/5". Or you can go with the larger Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 20 mm Thick - Qty 2 # RRQMHD20 with are two 20mm spacers, or...
  view full answer...
• Availability of Longer Rhino-Rack Crossbars to Work with RT-Style Roof Rack Tracks
  The Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148 that you referenced are compatible with a few different style mounting legs. For example, you can use the Track Mount RTC Legs # RRRLT600 with either the aero bars or the Rhino-Rack Heavy-Duty square bars using spacer # RRQMHD05. The aero-style bars from Rhino-Rack are available in lengths of up to 79 inches like with the Aluminum Aero Crossbar # RRVA200S. The Yakima towers will not be compatible with the Rhino-Rack tracks, but if...
  view full answer...
• Compatibility of Rhino Rack Antenna Mount with Jeep E Group Package
  The Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points # RRRCP27-BK is a confirmed fit for your 2012 Jeep Grand Cherokee with E Group package. This is designed to fit Rhino-Rack RCL Legs # RRRCL4 or half set # RRRCL2. and then use # RRVA126B-2 or # RRVA126B. The Antenna Mounting Bracket # RR43196 is intended for use on the channel of the crossbars or platforms but could be mounted to one of the RCL legs with some basic hardware adjustments. It...
  view full answer...
• Parts Needed To Install Rhino-Rack Pioneer Platform Roof Tray on a Truck Bed Camper
  In order to install a Rhino-Rack Pioneer Platform Roof Tray on a truck bed camper you will need the following: Rhino-Rack Pioneer Platform Roof Tray part # RR42109BF Rhino-Rack Quick Mount Legs part # RRRLT600 Roof Rack Leg Spacer Blocks part # RRQMHD05 (2) Rhino-Rack RT-Style Roof Rack Tracks part # RTC14 Unfortunately, there is no Backbone Mounting System for a truck bed camper. The reason for this is that you will be limited in regards to weight by that of the camper and there is no...
  view full answer...
• What Heavy Duty Crossbar Setup do You Recommend for My Snugtop Camper Shell with Tracks?
  Without knowing the exact crossbar dimensions that are compatible with your ROAM tent's clamps, we do have a crossbar system that will give you the weight capacity you need to work with your Snugtop camper shell on your 2015 Toyota Tacoma. For this setup, you need the following parts: - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 - x2 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars - 5 mm Thick # RRQMHD05 - Rhino-Rack...
  view full answer...
• Leg Spacers for the Rhino-Rack RCH Legs
  If you're looking for the leg spacers to mount Heavy-Duty crossbars to your RCH Legs, part # RRRCH6, then the correct part number for those are # RRQMHD05. With these, you'll be able to mount Rhino-Rack HD Bars, part # RB1250. This may seem confusing at first because the fit-guide states that these are not compatible with your 2007 Lexus GX 470. However, in this particular (and very rare) case, the specific vehicle does not matter because these are attaching to the legs. In other words,...
  view full answer...
• How Can I Attach A Pioneer Platform To My 2021 Ram 2500 With A Retrax Pro Tonneau Cover
  I can definitely get you pointed in the right direction, but without knowing the specific Pioneer Platform you recently purchased, there will be a few different ways you will have to install the platform to your Retrax Pro. I did speak with a Rhino-Rack representative, so I will be covering all of the installation options. If you do not have a universal fit Pioneer Platform, you can have one of two platform series, the 4200 or the 5200. If your Pioneer Platform does not have a ruler...
  view full answer...
• How To Use 71" Heavy Duty Rhino-Rack Crossbars on Tonneau Cover Tracks
  In order to use the 71" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1800B-2 with the channel mounting system on your tonneau cover you'll need the following: Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars part # RRRLT600 Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 Adapter Kit for Rhino-Rack RTL600 Legs part # RRT-FK1
  view full answer...
• 2022 Jeep Gladiator Rhino-Rack Roof Rack Using Backbone System
  To install crossbars with the Rhino-Rack Backbone system on your 2022 Jeep Gladiator you need the following parts: Backbone Roof Rack System - # RR65QJ Rubber Bases - # RRQMFK06 Quick Mount Legs - # RRRLT600 HD Leg Spacer Blocks - # RRQMHD05 (you need 2 of these) 59" HD Crossbars - # RB1500B-2 Please note this isn't a fit that Rhino-Rack has listed but I don't see why this wouldn't work since you're just replacing a fit kit with the Backbone which is supposed to offer much more support....
  view full answer...
• How to Mount a Rhino-Rack Pioneer Platform Rack to Roof Tracks
  In order to mount the Rhino-Rack Pioneer Platform Rack part # RR42101BF on your SnugTop Camper Shell with Rhino Rack Tracks you will need two of the Roof Rack Leg Spacers part # RRQMHD05 and one of the Rhino-Rack Quick Mount Legs part # RRRLT600. That will be all you need. The legs also come with keys for security. I was able to confirm the above with Rhino Rack.
  view full answer...

Do you have a question about this Accessories and Part?