Hydraulic Jack Adapter Lugs for JT's Strong Arm Jack Stabilizer Kits - Qty 2
(14 reviews)
Price: $60.99
In Stock
Hydraulic Jack Adapter Lugs for JT's Strong Arm Jack Stabilizer Kits - Qty 2
Item # LC314592
Retail:$111.69
Our Price: $60.99
You Save: 45%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (14)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC314592
- Camper Jacks
- Trailer Jack
- Hardware
- Adapter Lugs
- Lippert
Adapter lugs let you attach your JT's Strong Arm stabilizers to hydraulic jacks. Can be welded or bolted onto the round footpads of your landing gear.
Features:
- Adapter lugs let you attach the feet of your hydraulic landing gear jacks to your JT's Strong Arm stabilizers
- Each lug allows for attachment of 1 stabilizer
- Weld-on or bolt-on installation
- Lugs attach to the round footpads on your landing gear
- 2 Lugs and mounting bolts included
- 1-Year warranty
314592 Lippert Components (LCI) JT's Strong Arm Jack Stabilizer Hydraulic Jack Adaptor Lugs - Qty 2
Video of Hydraulic Jack Adapter Lugs for JT's Strong Arm Jack Stabilizer Kits - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert JT Strong Arm Jack Stabilizer Kit Hydraulic Jack Adapter Lugs - LC314592
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at these Hydraulic Jack Adapter Lugs. Now, these are going to allow you to attach your JT's Strong Arm stabilizers to your hydraulic landing gear jacks. Each lug is going to allow for an attachment of one stabilizer. These are going to attach to your round footpads on your landing gear as you can see in that diagram there that's showing you where to get them installed. These can be welded on or bolted on, they do include the mounting bolts here, so if you are going to bolt them on, you'll just need to drill a 3/8 inch hole and then use some sealant or thread tight on the threads there to make sure that they've got a nice tight threading.
But if you are gonna weld them in place, these are a unfinished steel, so you can very easily get them welded in place on your footpads. One thing that a lot of our neighbors have commented is because these are unfinished, after you get them installed, it's a good idea to put some paint on there or something to protect them from corrosion. But if you are looking to attach your JT's Strong Arm stabilizers to your hydraulic landing gear jack's footpads, these are going to be exactly what you need. That completes our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Hydraulic Jack Adapter Lugs for JT's Strong Arm Jack Stabilizer Kits - Qty 2 - LC314592
Average Customer Rating: 3.9 out of 5 stars (14 Customer Reviews)
Adapter lugs let you attach your JT's Strong Arm stabilizers to hydraulic jacks. Can be welded or bolted onto the round footpads of your landing gear.by: Chris07/27/2023
It's complete garbage that you downs over $[XX] for a kit compatible with 5th wheel trailers and the only mention of these are for hydraulic jacks. I don't have hydraulic jacks, I have electric telescoping jacks so I should have been good right? Nope, chatted with etrailer rep who told me they are considered hydraulic even though they aren't. This is total BS. So now I've got my front stabilizers installed and have to spend $[XX] on $[XX] worth of metal, at most. They really catch you with this one. I would recommend steadyfast over this product. You get what you need in that kit and no bending you over a barrel like they do with this kit from Lippert.
by: Calvin09/25/2023
Call Lippert and check reviews.
by: Ben A.08/22/2016
These look to be well made adapter lugs but it will be best to try and find someone to weld them to the round Lippert landing gear foot pads because the countersunk screws will just get ground off after a few landing gear extensions onto concrete RV spaces.
by: Al10/14/2019
Lippert sells there JT's strong arms as a basic kit. And the majority of us have to buy extra pieces to adapt the strong arms to to our particular use. These adapters are raw steel as they can be welded in place and will corrode if not painted or covered. In my case I had them welded then the landing pad powder coated.
by: Brian 04/13/2020
If you use these you will need 2 more swing bolts than what comes with the kit. I called Lippert and they sent me 2.
by: Paul 10/11/2022
by: Mark 06/15/2021
Very expensive and I had to paint then. Product is well made and does exactly what I needed.
by: Brian11/09/2020
Very heavy duty and nice machining but significantly over priced for what they are. 3 out of 5 stars simply for the price!
by: Timothy12/02/2017
welded mine on just make sure you paint them they will rust
by: Jo04/12/2019
They do their job
by: Paul 08/11/2022
Super easy to install
by: Paul G.12/08/2018
Looks very well Machine. Looks like they should work well, but won't know how it work until spring unfortunately.
by: Mike02/07/2024
by: Wesley 12/02/2021
14
14
See what our Experts say about this Lippert Accessories and Parts
- Correct JT's Strong Arm Jack Stabilizer Kit for a 2020 KZ Durango Gold 386FLF with Auto-LevelThe correct JT's Strong Arm Jack Stabilizer Kit for a 2020 KZ Durango Gold 386FLF will be dependent on the distance between the front two landing gear legs (inside to inside). If this distance is 58" or more then you need part # LC191023 but if less than 58" then you need part # LC191024. I confirmed with Lippert this system will work with the 6-Point Auto-Leveling System. If the 6-Point Auto-Leveling System is hydraulic, you will also need the Hydraulic Jack Adapter Lugs part # LC314592.
view full answer... - Will JT's Strong Arm System Work with LCI Level Up Hydraulic Landing GearIt sounds like your concern is that the landing gear legs could get damaged when retracting them all of the way. Since Lippert designed both the JT's Strong Arm systems and the Level Up systems the two are compatible. I do recommend watching the legs carefully as they retract to ensure that nothing interferes with their movement but I do not anticipate any issues and have not heard of problems from customers.
view full answer... - Will the JT's Strong Arm Jack Stabilizer Kit Work With Lippert Level Up Hydraulic Leveling SystemYes, the JT's Strong Arm Jack Stabilizer Kit part # LC191023 will work with the Lippert Level Up Hydraulic Leveling System. That said, you will need the Hydraulic Jack Adapter Lugs part # LC314592. The install instructions are attached for you to the page below.
view full answer... - Can the JT Strong Arm be used with the Lippert Ground Control 3.0?From what I could find out, you can definitely use the JT's Strong Arm Jack Stabilizer Kit # LC191023 with your Ground Control 3.0. It is suggested that the adapter # LC314592 is used to attach the bars to the feet as the bottom of the jacks on the Ground Control is a little to cluttered, for the lack of a better way to put it. These do come as a pack of 2, so you will need 3 sets to complete the install.
view full answer... - Can JT's Strongarm Stabilizer be Installed on Trailer with Lippert Ground ControlSounds like you have an auto leveling Lippert Ground Control/Level Up jack kit on your trailer. The JT Strong Arm Stabilizer System # LC191023 will work with your LCI Level Up System. I checked with Lippert and found that you can use the JT's Strong Arm Jack Stabilizer Kit # LC191023 with the adapter lugs # LC314592. For your LCI system will need a quantity of 6 adapter lugs if you have a 6 point system or 4 if you have a 4 point system, these are sold as a quantity of 2 on our site.
view full answer... - JT's Strongarm Stabilizer Recommendation for Trailer with Hydraulic Stabilizer LegsThe Lippert Components JT's Strong Arm Jack Stabilizer Kit - Over 58" Between Landing Gear, # LC191023, will help to stabilize your Keystone. I contacted Lippert who manufactures the Level Up system you are referring to and they said that there is an adapter part needed to utilize this system. The adapter is Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug for 5th Wheel RV Landing Gear, # LC314592. These lugs can be welded to round hydraulic foot pads to allow you to stabilize...
view full answer... - Do The Rear Stabilizer Arms For JT's Strong Arms Have To Be In Line With Jacks On 2020 Grand Design?The rear arms for the JT's Strong Arm Jack Stabilizer Kit # LC191023 can be offset and not in a perfect line with the rear jacks on your 2020 Grand Design Reflection 337RLS. Based on videos I could find for your Reflection you have the square landing gear so you will only need one set of the Hydraulic Jack Adapter Lugs # LC314592 for the rear round hydraulic jacks. If for some reason your Reflection has the round front hydraulic jacks you will then need 6 adapter lugs.
view full answer... - Recommended JTs Strong Arm Jack Stabilizer Kit for Dutchmen Atlas 3252 MBFThe measurement to determine the correct JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs is taken from directly under the cab of the trailer in between the two outer tubes on the jack (inside to inside). I have attached a photo of this for you as well. If this distance is less than 58" then you will want to use part # LC191024 but if it is more than 58" and not 66" then you will want to use part # LC191023. Since you have hydraulic jacks in the rear you will also need one set of...
view full answer...
- Can JTs Strong Arm be Used on a Fifth Wheel Trailer that has Lippert Level Up SystemThe Lippert Components JT's Strong Arm Jack Stabilizer Kit - Over 58" Between Landing Gear, # LC191023 can be used with the Lippert Level Up with the correct adapter, part # LC314592. I spoke with my contact at Lippert to confirm this.
view full answer... - Can JTs StrongArm Stabilizers Fit Auto Leveling Stabilizers for RVSounds like you have an auto leveling Lippert Ground Control/Level Up jack kit on your trailer. The JT Strong Arm Stabilizer System # LC191023 will work with your LCI Level Up System or the Ground Control. I checked with Lippert and found that you can use the JT's Strong Arm Jack Stabilizer Kit # LC191025 with the adapter lugs # LC314592. For your LCI system will need a quantity of 6 adapter lugs if you have a 6 point system or 4 if you have a 4 point system, these are sold as a quantity...
view full answer... - Installation Instructions for the Lippert Components JT's Strong Arm Jack Lug # LC314592I attached a picture that has the install instructions for the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug # LC314592 that you referenced to show you how it installs. They can be welded or bolted to the feet.
view full answer...
- How to Install the Lippert Components JT's Strong Arm Jack Stabilizer Kit # LC191023 on RVTo install the Lippert Components JT's Strong Arm Jack Stabilizer Kit # LC191023 on your hydraulic levels you will need to also install the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug # LC314592. I will be sending the instructions for you to check out in a separate email.
view full answer... - Can JT's Strong Arm Jack Stabilizers Be Used On a Hydraulic Auto Leveling System? Yes, the JT's Strong Arm Jack Stabilizer Kit # LC191023 are compatible with the hydraulic auto level system on your 2021 Forest River Riverstone Reserve 2850RK 5th wheel. You will need to add the Hydraulic Jack Adapter Lugs # LC314592 to be able to connect to the pads on the jacks. The lugs will need to be welded on or you will need to drill 3/8" holes to bolt them to the jack pads. You will need to paint over the lugs as they are bare steel and will need a rust protective paint.
view full answer... - Parts Needed To Install JT's Strong Arm Kit On 2021 Dutchmen Astoria With Lippert Ground Control 3.0To install your JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs # LC191023 or # LC191024 on your 2021 Dutchmen Astoria 2993RLF Fifth Wheel with the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System you will need the Hydraulic Jack Adapter Lugs for JT's Strong Arm Jack Stabilizer Kits - Qty 2 # LC314592 you were looking at. I included video review of the JT's Strong Arm Kit for you to take a look at.
view full answer... - Correct JT's Strong Arm Jack Stabilizer Kit for a 2021 Forest River Aurora Travel TrailerWe do have what you need but the reason everything seems off compared to what you have is because the JT's Strong Arm Jack Stabilizer Kit # LC191023 is designed for use on 5th wheel trailers. Since your Aurora is a travel trailer it is going to have a different set up and you would want the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025. The # LC191025 attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear. If you have electric jacks you would...
view full answer... - How To Verify Which JT's Strong Arm Will Fit A 2020 Forest River Wildwood Heritage Glen 370BLFinding the correct JT's Strong Arm Jack Stabilizer Kit for your 2020 Forest River Wildwood Heritage Glen 370BL will require a measurement to be taken as well as confirming what type of landing gear you currently have (hydraulic or electric). You may be able to contact Forest River with your VIN to get this information, especially to see if you have electric or hydraulic jacks, but they may not be able to tell you width between the legs. If they cannot tell you what the width is between...
view full answer... - JT's Strong Arm Jack Stabilizer 91023 for 2018 Grand Design ReflectionIf you have the LCI Level Up System you can use the Adapter Lugs # LC314592 with the JT's Strong Arm Jack Stabilizer Kit # LC191023 (which is the correct kit if you have 58 inches or more between the two front landing gear legs). I have added a separate link for you to the installation instructions.
view full answer... - Using JT's Strong Arm Jack Stabilizer Kit With Round Self-Leveling JacksYou can use the JT's Strong Arm Jack Stabilizer Kit # LC191023 (66" or More Between Landing Gear) or # LC191024 (Under 58" Between Landing Gear) with round hydraulic jacks so long as you use the JT's Strong Arm Jack Stabilizer Adaptor Lug # LC314592, which welds onto hydraulic foot pads. These lugs come in a quantity of two.
view full answer... - Recommended Stabilizing Kit for Lippert Auto Leveling System on 2017 Keystone Sprinter 5th WheelThe auto leveling system on your 2017 Keystone Sprinter is a Lippert auto leveling system, so the stabilizers that I recommend are the JT's Strong Arm Jack Stabilizer Kit which are also by Lippert and confirmed to work. If you have more than 58 inches between your front landing gear legs, then you will want part # LC191023. If you have less than 58 inches, then you will want part # LC191024. You will also need the Adapter Lug, # LC314592, for the rear leveling legs.
view full answer... - Do Adapters Need to be Used to Mount JT's Strong Arm Jack Stabilizer Kit?No, you need to use the Adaptor Lug # LC314592 with your round landing gear foot pad when installing the JT's Strong Arm Jack Stabilizer Kit # LC191023. The weld-on lugs will ensure the proper support and stability necessary for the stabilizer kit; just drilling a hole won't give you the needed support.
view full answer... - JT Strong Arm Stabilizer Kit Compatible with 2016 Keystone Sprinter 5th Wheel TrailerThe JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs - 58" or More Between Landing Gear # LC191023 is designed for 5th wheel trailers. The # LC191024 for under 58 inches between landing gear is also for 5th wheel trailers. I've attached the installation instructions to assist. You can use the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug for 5th Wheel RV Landing Gear # LC314592 to make a bracket for it. These lugs can be welded to round hydraulic foot pads popular...
view full answer... - Are Electric Stabilizer Jack Pad Adapter for JT's Strong Arm Jack Stabilizer Kits Available I believe you're looking for the Electric Stabilizer Jack Pad Adapter for JT's Strong Arm Jack Stabilizer Kits # LC314597, which would allow you to connect to an electric stabilizer jack like the picture I've attached below. If you're trying to attach to a different style jack foot then end me some pictures and I'd be happy to find a solution for you.
view full answer...
- Will Strong Arm Jack Stabilizer Kit Work With Hydraulic Auto Leveling System?Yes, the JT's Strong Arm Jack Stabilizer Kit # LC191023 will work with your 2016 Forest River Vengeance with the use of six Strong Arm Jack Stabilizer Adaptor Lugs # LC314592 as long as the front two landing gear legs are at least 58 inches apart. The kit will be beneficial in furthering stabilizing and preventing movement in any RV while at it's destination, and particularly one the size of your Forest River.
view full answer... - Can JT's Strong Arm Jack Stabilizer Kit be Used on Round Hydraulic Landing Gear Jacks Yes, the JT's Strong Arm Jack Stabilizer Kit # LC191023 referenced in your question can be used with hydraulic round jacks like what you have on your 2018 Grand Design as long as you add the Hydraulic Jack Adapter Lugs # LC314592. These adapter lugs can be welded or bolted onto the foot pads of your landing gear to allow the JT's Strong Arm stabilizers to attach to the jacks. The Strong Arm Kit you referenced is designed for trailers that have 58 inches or more between the front landing...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Chelsea B
Updated by:
Kristina F
Updated by:
Mike S
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul
10/17/2023
It is still working as advertised. Just need to remember that you need to loosen the T-bolt before you try to raise your landing gear.