It may be "mini" but it gets the job done! This stout little metal grease gun is great for random jobs around the house. Designed to house one 3 oz. grease cartridge and reach up to 4,000 psi.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey, everyone. I'm Ellen here at etrailer.com.Today we're taking a look at the LubriMatic Economy Grease Gun.Now this is going to give us a smaller grease gun so we can get into those tighter to reach spots. So it's going to work out well for greasing up the inaudible 00:00:15 on fifth wheel, maybe on your bearing buddies or something on your trailer, but still be small enough to fit into a toolbox or under a compartment on the bottom of your RV or really anywhere that you want to store it.So it comes with the pipe to get that mounted up either to the front. So it goes through the handle like that, or we can remove the screw up here at the top and then have it be a top loaded position as well. So that makes it pretty versatile for getting into those tight, hard to reach spots.To loosen that up, you'll just need a five millimeter Allen wrench or a 3/16 inch.And then this does develop around 4,000 PSI or pounds per square inch of pressure to get that grease pushed in where you need it to go. To load the grease in, this could either be filled with suction or by suction, so it'll pull the grease into the canister, or you can use a cartridge, something like this.
There are a lot of different kinds of grease here at etrailer.com you can find. You just want to make sure that you get one that's going to be a three-ounce cartridge.So, if you're putting in one of those cartridges, you'll want to remove the canister from the top assembly, pull that plunger all the way back, and then push it so that it goes into the little slot. Kind of hard to see that, but pull it all the way out. Again, I turn towards me so I can actually do it. So whenever it slides into that slot, it'll hold that plunger out.
Then you just take the cap off one side, put that in our canister, and then you'll want to remove the foil up the top as well before you get that push all the way in. And then just thread that in place. And with this one, you might have to remove this little metal piece. I'm not sure if it's going to fit in there all the way, but just wanted to kind of demonstrate how that's going to go, but you will just thread that all the way down and then you can release that plunger. And it'll push that grease up in and then push it into place where you need it.As far as the size with that pipe facing towards the front, it's about 8 inches long and about 10 inch tall.
We just go to the outside of the handle there, it's about 4 inches wide. Canister is about 1 inches in diameter. We have this just threaded in at the top. It's about 16 inches tall, roughly,But that's going to do it for our look at the LubriMatic Economy Grease Gun..
Average Customer Rating: 4.6 out of 5 stars (7 Customer Reviews)
It may be "mini" but it gets the job done! This stout little metal grease gun is great for random jobs around the house. Designed to house one 3 oz. grease cartridge and reach up to 4,000 psi.I bought this specifically to grease my mountain bike and it's worked well so far. I have a regular grease gun but wanted something more compact and less expensive and didn't want to mess with swapping out a different kind of grease for another application. The product is solid and doesn't leak using marine grease. The adapter for my bike zerk fittings doesn't fit perfectly but I believe that is the fault of the adapter. Overall I'm pleased with the product.
Perfect size to put in a small toolbox. Worked very well. Instructions were a little sketchy, but if you've used a grease gun before you don't need them. Knurled surfaces make assembly and disassembly very easy.
Works like advertised. Easy to load and use and my trailer is humming along nicely.
Nice little grease gun to keep in the camper. I gave my first one away with the camper I just sold so I bought a new one for my new camper.
Do you have a question about this Lubricants Sealants Adhesive?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.