Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
(582 reviews)
Price: $1,725.00
In Stock
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
Item # DM8550034
Retail:$2,030.00
Our Price: $1,725.00
You Save: $305.00
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (582)
- Q & A (0)
- Photos
Demco Fifth Wheel Hitch - DM8550034
- Sliding Fifth Wheel
- Demco
- Above Bed Rails
- 18000 lbs GTW
- Premium - Single-Hook Jaw
- Double Pivot
- 14 Inch Fore/Aft Travel
- 4500 lbs Vertical Load
- 16-1/2 - 19-1/4 Inch Tall
This hitch slides automatically as you drive to give you 14" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking.
Features:
- 5th-Wheel hitch mounts in your short-bed truck bed so you can tow your 5th-wheel trailer
- Automatic slider provides clearance required for your short-bed pickup to turn safely at slow speeds
- No more getting into and out of the truck to operate a manual slider
- Head slides toward the tailgate when you turn and back toward the cab when you straighten out
- Rack-and-pinion gears create smooth, controlled, automatic motion
- Rotating hitch head turns up to 90 degrees with your trailer
- Rotation creates the force that propels the automatic slider
- Built-in brackets stabilize your pin box so the king pin won't rotate in the hitch - no need for a separate capture plate for standard, non-cushioned pin boxes
- Wraparound, single-piece jaw provides a secure connection
- 360-Degree jaw-to-king-pin contact
- Less rattle and more security than slide-bar jaws
- 3/4" Thick, solid steel locking bar reinforces the connection of your coupled trailer
- Automatically locks into place when the jaw closes
- Double-pivot hitch head eases hookup and helps to limit chucking
- Pivots front to back and side to side
- 3 Height settings to fit your application
- Cushioning polyurethane dampeners help reduce noise and absorb road shock
- Spring-loaded handle with comfort grip allows for simple coupling
- Tethered safety pin lets you secure the handle in the open or the closed position
- Sturdy steel construction with rust-resistant black powder coat finish
- Simple installation with base rails and installation kit (sold separately)
- Compatible with B&W, Curt, Demco, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley above-bed base rails
- Cannot be used with rails that are a part of a gooseneck adapter plate - base rails must be securely bolted to your truck
- Made in the USA
Specs:
- Designed for use on 6-1/2' truck beds
- Fits standard pin boxes 12" - 14" wide
- Locking plates (sold separately) are required for use with the following cushioned pin boxes: Glide Ride, Mor Ryde, Trailair Tri Glide, Trailair Flexair, Rota Flex, and 5th Airborne
- Gross towing weight: 18,000 lbs
- Vertical load limit: 4,500 lbs
- Travel: 14" front to back
- Hitch height settings: 16-1/2", 17-3/4", and 19-1/4"
- 5-Year limited warranty
Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.
Automatic Slider Makes Cornering Easy
Most often used on trucks with 6-1/2' beds, a slider helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a slider to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
Normally, you'd have to get out of your truck and pull a lever to release the slider before every turn, but what if there was an automatic system? Imagine having 14" of extra clearance while towing your fifth-wheel trailer. Now imagine having this without needing get out of the truck to move your slider. The Demco Autoslide makes this fantasy a reality. The Autoslide automatically glides back smoothly when you make a sharp turn so you can maneuver effortlessly around tight corners within campsites and parking lots.
The base of the Autoslide has a built-in rack-and-pinion gear system that operates automatically. As your truck turns, the pinion in the base also turns. This activates the rack gear, which causes the rotational force of the truck to be converted into the linear sliding action of the hitch. So, when your truck makes a sharp, slow-speed turn, the gears inside the Autoslide force the hitch head to slide down toward your truck's tailgate in a smooth, controlled motion. This way, any time that your truck turns more than 10 to 15 degrees, the Autoslide will ensure that there is enough clearance for your trailer to complete the turn as well, and it will do so without any jerking or binding.
In order for the rack-and-pinion assembly to function as designed, the pin box must be stabilized on the hitch head. Normally in a fifth-wheel hitch, the king pin moves inside of the hitch head so that the trailer can turn. With the Autoslide, the king pin remains fixed inside of the jaws of the hitch and it is the hitch head itself that turns. This is thanks to the capture brackets on the sides of the head that brace the pin box from both sides to hold it in place on top of the hitch head. This is done to ensure that there is enough resistance within the hitch when your truck turns to properly activate the rack-and-pinion gear mechanism.
To stabilize your pin box on the hitch head, simply push the capture brackets up against your pin box once the trailer is coupled and tighten the outer bolts and the inner jam nuts. The Autoslide head and brackets will fit standard pin boxes that are between 12" and 14" wide. If you have a Glide Ride, Mor Ryde, Trailair Tri Glide, or 5th Airborne pin box, you must install a special locking plate (sold separately) as well.
When you straighten your rig out again and your trailer moves back in line, the hitch head will rotate back to center and slide back toward the cab into the straight towing position.
Secure Wraparound Jaw with Locking Bar
The single-piece, strong wraparound jaw completely surrounds your trailer's king pin for 360 degrees of contact. This wraparound jaw provides a more secure connection than standard 2-piece jaws that close in on the king pin from the sides. The increased jaw-to-king-pin contact on the Autoslide offers tighter tolerances around the king pin, which minimizes both rattle and chucking, for a smooth, quiet ride.
A 3/4" solid steel locking bar spans the area in front of the jaw. This bar provides an added barrier of protection against accidental disconnection so you can have peace of mind that your trailer is secure. The locking bar is attached to the jaw and to the spring-loaded handle. The bar automatically locks when the jaw closes around your king pin.
Double-Pivot, Cushioned Hitch Head
The double pivoting, cushioned head improves your towing experience dramatically by helping to reduce jarring and unwanted noise. Built-in pins allow the hitch head to pivot back and forth and side to side. And hooking up is easy because the hitch head will automatically pivot to the proper angle when it comes into contact with your pin box.
Three polyurethane dampeners help to cushion the movement from the pivoting head and to reduce towing noise. Two of these dampeners are built into the head assembly to cushion the head's side-to-side pivoting. The third dampener cushions the back-and-forth motion and must be installed in the hitch prior to use. Installation of this third dampener is easy - simply press the dampener up into the pre-drilled hole underneath the hitch head.
Easy Installation
The Autoslide hitch is designed to attach to universal above-bed base rails (sold separately). The hitch will fit most industry-standard rails, including those from B&W, Curt, Demco, Draw-Tite, Hidden Hitch, Husky, Reese, and Valley. The hitch comes pre-assembled for an easy installation. All you have to do is bolt on the side plates and attach the head to the hitch base.
The side plates have 2 functions. They contain the feet that fit into your above-bed rails, and they allow you to raise or lower the hitch head to better match your pin box height. After you choose your desired height setting, simply bolt the side plates to the hitch base with the included hardware. Then attach the base to the rails with the included safety pins.
Clearance Formula for Short Bed Trucks
Use the formula below to ensure there will be enough space between your truck cab and trailer when executing a 90-degree turn.
(A+B) - C = Clearance
A = Distance from the center of fifth-wheel hitch jaw to truck cab
B = Length of Travel (14")
C = Width of trailer divided by 2 (to get half)
For example: If the distance from the center of the hitch to the cab is 36", 36" + 22" = 58". If your fifth-wheel trailer is 102" wide, take half (51"), then plug in: 58" - 51" = 7" of clearance.
Note: At least 4 inches of clearance is recommended to safely execute a 90-degree turn.
6077 Demco High Jacker Head Assembly for Auto Slide 5th Wheel Trailer Hitch - 18,000 lbs
6003 Demco High Jacker Adapter Plates for Auto Slide 5th Wheel Trailer Hitch
Installation Details
Alternate Instructions
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Customer Reviews
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs - DM8550034
Average Customer Rating: 4.7 out of 5 stars (582 Customer Reviews)
This hitch slides automatically as you drive to give you 14" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking.by: John07/15/2022
Demco auto slide hitch works very well with my crew cab short bed Ram. Fits under my tonneau cover nicely. Trouble free thus far. Had to purchase a Demco plate for the camper to make the Rhino box hitch work. etrailer personnel were great in helping ensure I had the right products and kept me well informed of shipping dates.
by: Adam12/29/2018
My wife and I are full-time RVers, and have used this slider hitch from the get-go while traveling around seeing the country over the past year. We are happy with our purchase, which has proven to be both easy to hook up, adjust, and functions well, as advertised.
The only matter I think you may want to address are the thick plastic removable maintenance access covers which tend to bow, and the areas around the attachment holes have melted, in the hot weather. Perhaps instead using a light metal for the covers would be better solution.
We are very happy overall with this hitch, and plan to keep it . Thank you.
by: Dan02/11/2019
I have owned this unit for over a year now. Here are the pro's and cons that I have experienced.
Pro- I have pulled with this hitch in some really tight spaces in forward and reverse and still have the rear window in tact.
Con- Heavy, really heavy.
Pro- heavy duty,smooth riding, and double jaw lock makes a great connection.
Con- manufacturer recommends 1/8 of separation between the slides on the top of hitch. When backing upon 40' wheeler in some tight spaces it is hard to align without opening the slides a bit more. This is not he issue. Remembering to tighten them in the rush of leaving is the hard part.
Pro- once you are attached to your truck there is nothing more you need to worry about until you disconnect.
Con- If you are a weekender like me and use your truck for work the rest of the week, you will need at least one person to help lift in or out pre or post travel. Works pretty well with gantry crane.
by: Mike G09/15/2018
Installed in my 2014 Silverado. This looks to be a very heavy-duty hitch that doesn't require a capture plate.
Mike G.
9/15/2019
This hitch has worked well for me. It is now used in a 2018 GMC Sierra 2500. It is just tall enough that I can see it in my rearview mirror to make it easy to get lined up with the kingpin
Jon G.
9/27/2019
Glad to hear that you're getting good use out of your Demco Hijacker 5th Wheel Hitch! If you get to the point where you'd like a different angle we have different cameras you can use in place of your 3rd brake light. I have linked our selection for your 2018 GMC Sierra 2500 for you to filter through.
Helpful Links
by: Neil04/04/2022
wow what a great hitch . Got the no drill bed rails and the bolted rite up to my B&W gooseneck hitch . Ashley E did a great job answering all my questions . Only took a few days to get here too. Took me about 2 hours to install everything and if you have a short bed truck this is the only way to go .
by: Lawrence06/11/2021
Excellent choice for a short bed Super Duty . Have towed several thousand miles with no issues. This is a heavy hitch , but that is what you get with a heavy duty Demco hitch . Plenty of room between trailer and truck when doing tight turns.
by: Harold03/22/2020
Tows great. I’m a first time fifth wheel owner. This made it easy. Be careful because this hitch is capable of angle that your trailer axles aren’t especially on a hard surface like asphalt or concrete. Over all very pleased. Be prepared to hoist this hitch in and out of your truck if you plan on removing it often. Probably weights closed to 400-500 lbs.
by: Gary B. 07/13/2019
I love this hitch. Never having used an automatic slider and moving from a long bed to a short bed truck it took me a few attempts to get accustomed to backing up.
I would recommend this slider over any other brand. No capture plate needed either.
by: James D05/07/2017
Unit is heavy and well built. Install was easy, just bolt on side plates on, drop the base on the adapter plate and pin it, put head assembly on and pin that, that's all there is to it. Looking forward to many years of towing with this unit.
by: Larry10/24/2023
This was a huge improvement over my last hitch. This hitch took away the most of the jerking and bouncing I had before. Easy to install though pretty heavy. It also took away the fear of hitting my cab with the trailer every time I had to make a sharp turn and knocking out my back window again. Those of you that have the aluminum body Fords, beware, the cab won't take much abuse as the older steel body did.
by: Bruce 04/08/2023
I've been a tool and die maker for 42 years and can see the outstanding craftsmanship in this 5th wheel. It's built like a tank. Best of all it's made in AMERICA.
by: Lee H.08/01/2017
Demco fifth wheel hitch purchase and installation pictures.
by: Wayne 10/13/2023
received the hitch from the shipper. everything was well packaged onto one pallet and cellophane wrapped. Inspected all the components - no issues. this weekends project is to install the hitch.
by: Jim P08/31/2018
We absolutely love our Demco Hijacker auto-slider hitch. We have a 6.5 ft bed, and a rather large 5th-wheel. I never have to give a single thought to unlocking the hitch and re-locking it before / after maneuvering. Everyone who sees it in action has that "jaw drop" reaction to it. Hooking up is very easy, and the engagement is VERY positive - you cannot miss getting it locked in place. Under tow, it is much more quiet than the previous one we used (loaner), and there is zero "lurching" or "chucking" as we experienced with the previous unit.
My only (minor) complaint is that I wish it wasn't quite so heavy, but it IS built like a tank. I probably could have gone with a lighter-duty unit for my specific 5th-wheel, but didn't want to have to replace the hitch if I ever upgraded to a heavier unit.
As for etrailer: everything I've purchased from them has shipped quickly, arrived (undamaged) on time, and has been of excellent quality. Thanks!
Jimp
9/5/2019
Still loving it. My only complaint definitely a 1st world problem! is that the unit takes up a lot of space in our bed when were not using the trailer. I solved that issue with a cheap chain hoist, attached to a beam in my garage. Now when we return from a trip and know were not going to use the 5th Wheel for a while, I just hook up the hoist and pull it out. Simple solution to my only issue with the Demco Hijacker.
by: Paul07/08/2021
Excellent product easy to install fit perfect and easy to hitch up well built exceeded my expectations.
by: Glenn07/09/2020
Quality is good. Installation was tricky without a lift. Some of the bed rail bolt holes (passenger side rear rail) where nearly impossible for a large hand to fit the nut on the bolt. Actually had to have my wife crawl under the truck and slide her hand in the brace to install the nut. Getting a decent size torque wrench into the space was also imposible. The front drivers side rail bracket required removing several vehicle lines and wires which was easy however the bracket covered the holes where the wires attached to the frame, so now they are hanging zip tied together. Hitch/ fifth wheel looks good quality but very heavy. Installed a 400 .lb capacity electric winch from harbor freight to lift the hitch. Firestone airbag helper springs was easy install but getting the exact straight cut on the hose end that hooks to the fill port was challenging to keep it from leaking
Videos were very helpful
Glenn
7/11/2021
Works Flawlessly
by: Rob R03/26/2018
Demco 18k Highjacker Autoslide
by: Mark Falbrook Ca01/17/2019
Very well built and engineered. Great customer Sevice from etrailer and demco. If you plan to remove the fifth wheel from the truck demco makes a lifting pin. A gantry Crain is helpful too. This thing is heavy duty, good for a lifetime! I also purchased the rail adapter. Thumbs up for that also. Be aware that this setup is tall. My 2018 fwd Ram has a tall bed height combined with the fifth wheel height could make a lower trailer pin height a problem with tailgate clearance and trailer angle. I’m very happy with this setup.
Mark C.
1/20/2020
Its been a year and I would not hesitate to purchase again.
by: Gene T.06/20/2019
This hitch combined with the puck system makes it easy to hitch up my 5th wheel and tow it worry free. When done towing I simply remove the hitch and have the whole bed available to use. The auto slide works effortlessly to make maneuvering the trailer easy. Very excellent product at a fair price.
Gene T.
6/21/2020
Now that Ive had time to use this, it is awesome! never worry about having to adjust the hitch to make sharp corners. Worry free RVing at its best! Love it!
by: Arden07/31/2018
I would not buy this hitch again because --
1. It takes up to much space in the truck bed
2. It is over built thus weighs to much
3. It is very hard to hook up because the hitch swivels when unhooking, thus making the hooking up very difficult lining up on an angle.
4. With this hitch I cannot lock out the swivel feature. My old hitch I could lock it out
I would buy from E Trailer again there sales people are great and delivered time was great. The hitch choice was my mistake not E Trailer's
Heather A.
8/14/2018
This demco hitch part DM8550034 is a completely gear driven hitch. Whichever angle you uncouple at is the same position the head will stay in until it is coupled back up. It is a good idea to couple up at as straight of an angle as possible. If there is ever a situation where you have to uncouple at an angle you can physically turn the head back to a straight position by taking the head off the hitch and putting a straight bar through the assembly for some leverage. The head should not be swiveling during coupling unless the main bolt is loose. The bolt that holds the gear assembly together has to be torqued to the specific foot lbs in the installation instructions or the head may swivel and cause issues during coupling. That bolt is part 05366 in the instructions.
by: Michael08/21/2022
This hitch is great! It relieves you from any worries of making a mistake when turning or backing a 5th wheel trailer on sharp corners. You will hear a small metalic noise that is a result of the rotating head having clearances enough to operate properly and I had a similar sound with my bumper pull trailer.
by: Tom04/23/2021
Easy installation.
by: Lenny05/13/2019
The hitch works GREAT! Thanks.
Lenny J.
5/14/2020
Wonderful It’s a great hitch!!!
25
578
Show More Reviews
See what our Experts say about this Demco Fifth Wheel Hitch
- Hitch Height Dimension of Demco DM8550034 Hijacker Auto Slide 5th Wheel HitchI can help you understand why there are differentiating measurements on the Demco Hijacker # DM8550034. Both specifications are correct per the manufacture's instructions; the unit has adjustments from 15.25, 16.5, and 18.0. See attached image. According to the video, Jeff states the measurements from the bottom of the truck bed, so his measurements take in account the height of the above the bed rails this unit will need to be installed on. In the video that the lowest hitch height...
view full answer...
- Best 5th Wheel Hitch to Use With Tonneau Cover 21" from Bottom of Truck Bed on 2019 Ram 3500The Demco Hijacker Autoslide # DM8550034 is a great choice for your 2019 Ram 3500 with tonneau cover because the hitch head is adjustable between 15-1/4" - 18" tall, so it will fit in the 21" spacing you've got between the truck bed and your tonneau cover. The autoslide feature on the Hijacker means no more getting out of your truck to engage the slider to allow you to make turns and the 360 degree king pin contact from the single piece jaw means a more secure connection with less rattle...
view full answer... - Can Demco Hijacker Autoslide 5th Wheel be Used in Long Bed TruckIt's okay to use a slider hitch in a long bed truck and still have the hitch slide back around tight turns. While the additional turning clearance is not required it won't hurt anything. So you can use the Demco Hijacker part # DM8550034 you referenced in the bed of your new truck and wouldn't have to try to bypass the sliding feature. Which there isn't a recommended way to do that but if you removed the side plates that hold the threaded brackets that press against the pin box the head...
view full answer... - Demco Hijacker Autoslide Hitch Chucking When Making Tight Turn On A 2019 Ford F-250For your 2019 Ford F-250 Super Duty with the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550034 I recommend making sure that the jaws are closed fully around the king pin, and that the capture plates are adjusted appropriately. If you've towed your trailer a bunch of times before, It may be components wearing down and your best course of action is to refer to your owner's manual for the proper care and maintenance. If you've already done this, let me know and we can...
view full answer... - Is Demco Capture Plate for MORryde Pin Boxes Needed for Non-Cushioned MORryde Pin BoxesThe Demco capture plate part # DM8550034 for MORryde pin boxes is only needed for the cushioned MORryde pin boxes. If you happened to have a non-cushioned MORryde pin box then you would not need to use it.
view full answer... - Does the Demco HiJacker Autosliding 5th Wheel Trailer Hitch Auto Slide when Backing UpYes, the Demco HiJacker # DM8550034 will auto slide going backwards as well as forwards. The way that it is designed as soon as the head starts to turn the hitch will auto slide and it does not matter if you are towing forward or backing up.
view full answer... - Troubleshooting Slack in Performance for Demco Hijacker AutoslideIf you have been upkeeping with the care and maintenance on your 18K Demco Hijacker Autoslide # DM8550034 it sounds like you might need to mess with the gear adjustment bolt located on the cab-end of the Hijacker. To do this you need to place the hitch in a parallel position with the truck and then use a 1-1/8" wrench to loosen the nut and then tighten it until it stops against the gear. Then simply back the bolt off 1/8 turn and retighten the jam nut to keep everything secure. I'm attaching...
view full answer...
- Height, Length, and Width of the Demco Hijacker 18k Autoslide 5th Wheel Trailer HitchAs far as height goes for the Demco HiJacker 5th wheel hitch # DM8550034 the minimum measured up from the base rails in the truck bed is 15-1/4 inches. You should not have a problem closing the Tonneau cover on your 2015 Chevy Silverado 3500HD depending on the type of cover it is. Should there be an issue you can easily unpin the head from the base and set it aside. The overall width is approximately 31 inches and the overall length is approximately 35 inches. I have included a picture...
view full answer...
- What is the Weight of the Demco 18k Autoslide Fifth Wheel Hitch ?The Demco Hijacker Autoslide # DM8550034 has a weight of 273 lbs. I've added a couple links to video reviews of this hitch for you to take a look at.
view full answer...
- Does Demco Hijacker Autoslide Fifth Wheel Hitch Require Grease MaintenanceI attached a picture that I took from the install instructions for the Demco Hijacker part # DM8550034 that you referenced that shows all of the components of it that need to be lubricated. From the handle, to the head to the autosliding components.
view full answer...
- Troubleshooting Difficult Connection of Demco Hijacker AutoSlide to Fifth Wheel TrailerThe Demco Hijacker hitches like the part # DM8550034 are pretty particular about how straight your truck is relative to the trailer. Anytime we've seen issues with people having a hard time coupling with this hitch the problem has been that they aren't backing up totally parallel to the same direction as the trailer.
view full answer... - Will I Have Enough Clearance to Tow a Fifth Wheel Trailer with 2015 Ram 2500 with Sleeper ShellUnfortunately, there's no way you're going to get enough turning clearance with only 36 inches of bed space with either a sliding hitch or Sidewinder. You won't even be able to install the fifth wheel hitch with the sleeper shell installed. The hitch would be too far back in the truck bed. In order to determine the amount of clearance you have you're going to need to do a little measuring and a little math. Once installed, a fifth wheel hitch can sit either directly over or about...
view full answer... - Does the Demco Hijacker Auto-Slide Hitch Slide Back When Backing UpYes, the auto-slide feature of the Demco Hijacker Autoslide 5th Wheel Trailer Hitch # DM8550034 that you referenced will function in forward and in reverse. What slides the hitch back is the angle of the head in relation to the base of the hitch. When turning the head it engages the gears on that side of the hitch which then slides it back. Check out the video I attached for more info.
view full answer... - Do Demco Hijacker Autoslide Hitches Fit Most Standard Pin BoxesThe Demco Hijacker autoslide hitches like the # DM8550034 basically fit all pin boxes with a few exceptions that require capture plate type adapters. These are typically cushioned pin boxes which from looking at your picture it looks like you have a standard type of pin box and would not need any adapters. Several of the cushioned pin boxes end up not needing adapters as well.
view full answer...
- Fifth Wheel Hitch Recommendation for 2017 Ford F-250 Short Bed with Reese RailsSince you have a short bed and need a slider hitch the best recommendation I can make would be one that slides automatically as you make tight turns which will save you from having to get out and manually slide the hitch. For that the Demco Hijacker Hitch part # DM8550034 this will slide as you make tight turns and work very well. This hitch is also designed to fit the Reese rails you have installed already.
view full answer... - Fitment of Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider & ISR Above Bed Base RailsWhat I think you are asking about is the Demco Hijacker Autoslide, part number # DM8550034. Yes, this will mount to truck using the Industry Standard Rails (ISR) above-bed base rails. It is compatible with Demco and Reese branded ISR above-bed base rails as well as the B&W, Curt, Draw-Tite, Hidden Hitch, Husky, and Valley brands. It cannot however be used with rails that are a part of a gooseneck adapter plate, the above bed base rails must be securely bolted to your truck.
view full answer... - Will Autoslide Feature Of Demco Autoslide DM8550034 Work When Backing Up a Hill?The Demco Autoslide # DM8550034 slides back via a gear, so that as you turn the hitch head moves back giving you more cab to trailer clearance when turning. This feature will work whether you're backing up a hill or turning going forward as the gear does not know the difference.
view full answer... - Can Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550034 Tow 15.5k TrailerIf when your trailer is fully loaded it is under 18k the Demco Hijacker part # DM8550034 would easily tow it. Since you said the GVWR is 15.5k that shouldn't be a problem at all. As far as slider hitches go this is the best option around as it will automatically slide back as you make tight turns.
view full answer... - Will Demco Hijacker Autoslide hitch part # DM8550034 Fit Rails Reese Hitch FitYes, since you have a set of above bed rails that a Reese hitch has fit in the Demco Hijacker Autoslide hitch part # DM8550034 will fit and work well. The rails you have are exactly what this hitch is designed to fit. I attached a review video for this hitch for you to check out as well.
view full answer...
- Will Demco Hijacker Autoslide Work with Ford F-150 with 5-1/2 Foot BedThe Demco Hijacker Autoslide, part # DM8550034, may give you enough clearance to make a complete 90 degree turn in your 2017 Ford F-150 even with the 5-1/2 foot bed. In order to find out for sure find the distance the from where the center of the hitch's jaws will be in your bed and measure to back of your cab (A). This location ios likely going to be right over th rear axle. Add 14 to that for the amount of travel the Demco provides (B). Then take that number and subtract the width...
view full answer... - Will Demco Hijacker Autoslide Fifth Wheel Hitch Fit Standard Above-Bed Rails on 2016 GMC Sierra?The Demco Hijacker Autoslide # DM8550034 will work with industry-standard, above-bed rails which is exactly what it sounds like you have; the Hijacker Autoslide also uses four pins to mount to the rails. As far as a locking plate that would only be necessary if your Lippert pin box was a Trailair version, which I assume you would have mentioned. For standard Lippert pin boxes you will not need a locking plate with your Demco Hijacker Autoslide # DM8550034. I've added links to a pair...
view full answer... - Slider Function of PullRite SuperGlide and Demco Hijacker 5th Wheel Hitch We do not currently carry PullRite products but it looks like the automatic slider mechanism on the SuperGlide hitch you mentioned will operate whether going forward or backwards in the truck. Between these 2 models though I do recommend the Demco Hijacker # DM8550034. This is because in addition to having a higher towing capacity of 18,000 pounds (compared to 16,000 on the PullRite) the Hijacker also features a superior wraparound single-piece jaw coupled with a 3/4 inch thick steel...
view full answer... - How Straight Does Demco Hijacker Have to Be to to Connect/DisconnectThe Demco Hijacker AutoSlides like the part # DM8550034 really only can be connected/disconnected when you are totally straight. I called my contact at Demco and asked about disconnecting and the angle it can be detached. They told me that there is a 10 degree angle that the trailer can be disconnected to with the Autoslide.
view full answer... - Capture Plate Adjustment Procedure for Demco Hijacker Autoslide 5th Wheel Trailer Hitch DM8550034The silver capture plates on the Demco Hijacker Autoslide Hitch # DM8550034 should be adjusted after you hitch the trailer. You want to push the capture plates against both sides of the pin box then finger-tighten the inside jam nuts against the capture plate mount. Then tighten the outside jam nuts against the thick mounting plate. This is covered on page 3 of the instructions, which are linked for you. The procedure to uncouple the king pin jaws appear on page 7. Demco notes in step...
view full answer...
Do you have a question about this Fifth Wheel Hitch?
Info for this part was:
Installed by:
Joe V
Installed by:
Jeff D
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video by:
Andrew K
Video by:
Michael B
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Justice A
Written by:
Chelsea B
Test Fit:
Shane H
Test Fit:
Ryan G
Test Fit:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
7/17/2023
Still working great!