Derale 10-Row, High-Performance, Stacked-Plate Cooler with -8 AN Fittings - Class III
(1 reviews)
Price: $107.37
Derale 10-Row, High-Performance, Stacked-Plate Cooler with -8 AN Fittings - Class III
Item # D51008
Retail:$131.44
Our Price: $107.37
You Save: $24.07
Need help with installation?
Locate installers near me- All Info
- Reviews (1)
- Q & A (0)
- Photos
Derale Transmission Coolers - D51008
- Stacked-Plate Cooler
- Mid-Size Truck
- SUV
- Van
- With - 8 AN Inlets
- Standard Mount
- 13W x 4-9/16T x 2D Inch
- Derale
13" Wide x 4-9/16" tall x 2" deep, superior heat exchanger improves the performance and increases the lifespan of your vehicle's engine or transmission with maximum efficiency.
Features:
- Prolongs life of engine or transmission
- Improves overall performance
- Prevents heat-related failures
- Facilitates heat transfer between high-pressure fluids with furnace-brazed aluminum construction
- Designed with 10 rows of 2"-wide turbulator plates for increased capacity and more efficient cooling
- Works as either engine oil or transmission cooler
- Comes with built-in mounting brackets for easy installation
- Includes aluminum fittings
Specs:
- Inlets: -10 AN O-ring, female
- Fittings: -8 AN male
- Overall dimensions: 13" wide x 4-9/16" tall x 2" deep
- Distance between inlets: 10"
- Mounting dimensions: 12-1/4" wide x 2-7/8"
- 1-Year warranty
Stacked-plate heat exchangers have long been considered the most effective type of oil or transmission cooler, primarily because of their increased surface area. Allowing fluid to spread out over this larger surface area decreases the time required for heat transfer to take place. As a result, plate coolers typically manage to cool a greater volume of fluid faster than tube-and-fin, or even plate-and-fin, varieties. Add to that the turbulator technology - whereby fluids are agitated continuously to not only facilitate heat transfer, but also to prevent any undesirable drop in pressure - and you have an absolutely superior cooling system.
51008 Derale Stacked Plate Cooler with Fittings
Customer Reviews
Derale 10-Row, High-Performance, Stacked-Plate Cooler with -8 AN Fittings - Class III - D51008
Average Customer Rating: 3.0 out of 5 stars (1 Customer Reviews)
13" Wide x 4-9/16" tall x 2" deep, superior heat exchanger improves the performance and increases the lifespan of your vehicle's engine or transmission with maximum efficiency.by: Caiden04/19/2011
Good point. I hadn't tohhugt about it quite that way. :)
1
1
See what our Experts say about this Derale Transmission Coolers
- Can I Mount Derale 10-Row Stacked-Plate Cooler to Bumper of 2002 Jeep LibertyI spoke with my contact at Derale and he confirmed that the Derale 10-Row, High-Performance, Stacked-Plate Cooler # D51008, which you referenced, is a fit for your 2002 Jeep Liberty and can be mounted to your front bumper. To complete the installation you will want two of the barb hose fittings, part # D98202, replacement rubber hose # D15799, hose clamps # D13008 and insta-dapt radiator adapter # D13004. The mounting kit is # D50020.
view full answer... - Small Transmission Cooler Recommendation for a 2013 Ford ExplorerThe cooler that comes with the part # D15602 can be used as a transmission cooler for your 2013 Ford Explorer. Since you do not need the oil cooler parts that come with it you would be better off ordering the part # D51008, two of the part # D98202, rubber hose # D15799, and hose clamps # D13008.
view full answer... - Recommended Stacked Plate Engine Oil Cooler for a 2008 Dodge Caliber SRTThe Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III, item # D15605, will work on the 2008 Dodge Caliber SRT. The engine filter thread size is one of two sizes on the caliber,3/4-16 or 20 mm x 1.5mm, so you will need to determine which (included) sleeve nut will be used. If you would like to use a larger cooler, relocate your oil filter to a more accessible location and install a stacked plate oil cooler you can use the Derale Oil Relocation...
view full answer... - Is Transmission Cooler Needed for 2006 Saturn Vue Doing Light Duty TowingFor short distance very light towing in moderate temperatures you probably do not have to install a cooler for your transmission. That said, additional cooling of your transmission fluid over and above what is provided by the OEM cooler is never a bad idea. At the very least you'll want to make sure you've had your transmission serviced at the recommended intervals to ensure its fluid is clean and at the correct level. That may very well be enough for your light-duty application. Your...
view full answer... - Best Place to Mount Derale High-Performance Stacked-Plate Cooler # D51008 on 1991 Chevy HotRod TruckThe best place to mount a transmission cooler is right in front of the AC condenser core. The second best place would be between the AC condenser and the radiator. The least efficient place would be behind the radiator. I have attached an illustration, as well as a help article, for you. Stack-plate coolers are the most efficient coolers so as long as you install the Derale High-Performance, Stacked-Plate Cooler, # D51008, where it will be getting the maximum amount of air flow, a fan...
view full answer...
- Transmission Cooler Recommendations for a 1956 Buick CenturyThe heat sink coolers such as # D13266 are great if space is limited but they are not all that efficient. It would help some but if you need series cooling this is not the best option. I would instead go with a stacked plate cooler such as # D51008. It is small but very efficient. Or you could go with a plate fin style such as # D13503. We usually recommend using the largest cooler that will fit in the available space because transmission fluid cannot be overcooled. I have included a link...
view full answer...
- Transmission and Engine Oil Cooler Recommendations for a 2010 Honda Accord and 2003 Toyota TacomaFor a 2010 Honda Accord or any Honda that has a 3.5 liter engine, you can use the engine oil cooler and transmission cooler combo kit, # D15902. Your vehicle will use the 20 x 1.5 mm thread size included with the kit for the oil filter adapter. I have included a link to an FAQ on transmission coolers for you. This same kit will also fit the 2003 Toyota Tacoma with 2.7 liter engine. The difference is that it uses a different thread size, 3/4-16, for the oil filter adapter. For a fan,...
view full answer...
Do you have a question about this Transmission Cooler?
Info for this part was:
Updated by:
DeAnne T
Updated by:
Adele M
Updated by:
Daron K
Expert Research:
Robert G
Expert Research:
Michael H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.