To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. Converter is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the interior trim panels in your rear cargo area.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (32 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. Converter is made using SMT to ensure superior performance.Wiring harness arrived quickly and was easy to install. Would gladly order again from etrailer.
Plug and play! Very simple, easy installation. No cutting or splicing required. Took about 10 minutes. High quality materials. Very happy with my purchase.
A install video would have been a little easier. Fit was perfect!
Arrived quickly and worked as it should. No problems.
It was the easiest way to wire for a trailer. No soldering cutting etc. It was perfect. Unplug the car's wiring harness and plug in the T-connector adapting harness. So easy. When I sell the car and get another Matrix I will be able to unplug it and use it again if it fits another year.
I would recommend this to anyone.
Nice quality connectors. Super easy to install. Well designed kit.
Continues to work as intended after a year. It looks much cleaner and is much more reliable than an universal module. In my case, all connections are kept inside the car when not in use so the 4 pin connector doesn't rot like they often do in the winter here in Canada. the only thing that didn't hold is the double face tape to stick the module somewhere.
Great and easy. Looked at the sheet enclosed in packing.... Well packed...box in a box....another similar instructions inside product packing... Too easy, unsnap the lighting connector on each side, make sure to follow convention for druveraide, plug in harness...plug orig connector into harness....too easy.
Thanks.
This Wiring Harness was used to replace another brand that had failed, and it only took 15 minutes to install it . It is a very clean and almost invisible Wiring Harness.
Thanks to etrailer for the quick shipping .
Plug and play into the existing wiring harness, the only other thing you have to do is sand away the paint and use a screw for the ground wire.
The wiring harness is easy to install, but it has a ground wire that the instructions don't mention at all that you have to connect to whatever ground you can find. I'll probably wind up extending the wire and running it to one of the cargo-latch holding bolts, it seems to be the best ground in the tail-light area that is easy to get to.
Works as expected - very sturdy! What more can I say? It does the job!
Super easy, quick installation.
John V.
4/22/2014
It still works great and I remember how easy and quick it was to install.
Everything worked as described, the installation was easy, the instructions were easy to follow as well.
So far so good after one year. Zero complaints. Easy to install. Great product and a great price!! Thank you etrailer!
Talk about EASY! Curt makes this Plug+Play Hitch literally the easiest thing I've ever done.
Excellent Product!
My second order from etrailer. Both times
Order was correct and sent on time.
Ordered what I needed and shipped on time. Easy installation.
Harness assembly was “plug & play” couldn’t ask for a better product.
Snapped together fine. Works great.
Good quality, worked perfectly on my 2004 Matrix
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
2/28/2018
The Curt C55522 trailer wiring harness you purchased is a fit for the 2000-2002 Toyota Echo and the 2003-2008 Toyota Matrix, as long as your next vehicle is among those models and of those model years, the wiring harness would work fine on the next vehicle.