Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (27 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Worked perfectly
My Curt trailer wiring adapter was of high quality, easy to install, and delivered on time. eTrailer Is now my "go to" for towing supplies.
No complaints with product. Easy Installation and solves my trailer light issue. I Love the plug cover. It keeps water and dirt away from the connector when not in use.
Installing wiring in ANYTHING gives me the chills so it was a very pleasant surprise to find out the kit installed exactly as promised...quick & EASY. I had this installed to a factory plug! No soldering or splucing! What a relief to find a kit that does exactly what you expect it to.
The wiring kit was complete, with easy to follow instructions. It works as if were factory installed. If I need a related item in the future, I will definitely look to etrailer first.
Customer service was great assisting me in making sure I was ordering the correct wire harness. Delivery was fast and installation was a breeze. I would highly recommend etrailer.com to anyone in need.
The trailer wiring harness I bought was easy to install, works great thank you for the great service again.
wiring harness was great quality, instructions were clear, worked correctly right from the start. highly recommend.
Installed the wiring harness in minutes on my 1996 ZJ 4x4 5.2 engine. The real work was routing the wire (to the battery) in the undercarriage of the vehicle where it would be safe.
Great product and first class service. The wiring harness fit perfectly and work like it was factory installed.
Only thing I did not trust is how long it will last being from China, I have chrysler product (jeep), and they are k ow for electronics going crap on ya."l", any way, it fit just fine, seems to work. Thanks guys appreciate it, really .
Same thing it will be installed this weekend i like that all the stuff is my for. My jeep ill send pictures of it i just got boat n trailer cane at the right time now ots time to go wet a line n catch the big one
Excellent purchase, simple installation works like a charm. Received in a couple of days , Very happy with the product.
Simple and easy install , works as stated , good instructions
worked great and good quality and instr uctions
Delivery was fast, 3 days.Installs easy,hardest part was running power wire to battery. Works great.
Trailer works great. Prompt, courteous service. I highly recommend eTrailer.
i replaced the one that i had prior , the old one had a short,it was about three years old. it was purchased i believe from your company. so i`am trying another one hopefully better luck with this one
It was well worth getting fast and easy to do
Killer! Very easy to install on my old Jeep and it just works.
Got the part I ordered and it was on time. Can’t get any better than that. I am recommending you to everyone that is looking for your products
Thank you just what I needed to continue the restoration of A Gem Camper..Great service,we will be doing more business as the restoration progresses..Bruce
easy to order, got what I wanted in a timely matter.
Thank you
great product, price and shipping
Works perfect. Had it hooked up in no t ime.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ron B.
9/26/2014
One year later and everything works as it was when new.