To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port behind your 's dash.
Features:
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness, which is located behind the dashboard. To access this connector, you will need to remove the finish panel in your dash. Plug the adapter into the connector in the large gray housing behind the panel.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (31 Customer Reviews)
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port behind your vehicle's dash.I believe I entered the correct vehicle type and the cord did not match my 2024 e350 super duty. Luckily there were extra wiring harnesses with the new van. I spliced the correct end that matched my brake controller left behind my coin tray by the manufacturer. I was able to use the rest of the harness to the brake controller so it still was useful. Who knows. My manufacturer could have wired it incorrectly.
Ford 2013 F250.. This brake controller fit like a glove. I have a 2013 F250 and I finally found the plug behind the coin box on the dash. It fit just right and after I finally found where the factory plug was and routed all the wiring behind the dash it took about about 15 minutes to get everything working. I have use e-trailer for several projects and the shipping is amazing and they totally understand what they are doing. Thanks to all at e-trailer.
Jim S.
4/1/2015
works like is it suppose too, not any problems
Jim S.
4/1/2015
hooked right up and not any problems. 2013 F250 connectors were behind the coin
I bought a weight distribution hitch w|sway control, and a trailer brake controller for my Four Winds RV. I received my order today, within a few days of placing the order. I have not installed it yet but it appears to be user friendly. Both pieces are made by Curt so the quality & performance should be good.
My thanks to etrailer & Stacy??
Works as expected.
I recently bought a Kurt trailer brake controller with adaptor. I have to say, that it was the easiest thing to hook up. The product was also shipped to my home very fast. I did not think I was going to receive the package until the next week, but it came just in time to use it the following day for my work. i Love ordering products from etrailer, I have only had really great service and good products from them. I will for sure, order from them again.
Product installed in 5 minutes, tested and setup in 10 minutes. Shipping was fast. Superb value
Kenneth T.
9/16/2017
Works great
This product was perfect for my use. The wiring harness worked just as I was told and very easy to install. I have bought several items from etrailer and everything has been good quality. The items arrive in good working working condition and in a timely manner.
Etrailer employees are very helpful and professional.
Brake controller and adaptor installed and connected in less than 10 minutes, I am very happy with the purchase and the included instructions and information.
This is the second of these units I have purchased and installed. The quick connect ends make it soooo easy, just plug the matching ends together (NO splicing wires). I highly recommended this unit with the pigtail extender
Perfect, plug and play
brake controller.
Product fit just like it should and as you said and your video or picture was very helpful in finding the plugin at such a weird location that ford put it.
Cable worked great,watched video couldn't find factory plug.It was behind coin holder below radio.You guys are the best THANKS
Didn't work poor info from customer ser vice
Sierra K.
9/1/2021
I see that you ordered the C51140 brake controller with the C51432 adapter. Since you said you have a factory 7 way, the adapter will plug into the built-in port behind your vehicles dash. If you cannot find the built-in port and are not sure if you have a factory 7 way, you can call a local dealer with your vin number and they will tell you. Please note, if your vehicles 7-Way trailer connector has LED test lights built into it, the TriFlex brake controller will not be compatible.
First of all I received the product much faster than expected. The gal on the phone told me a week to 10 days, I received it in about four days. It took me about 10 minutes to install it and it works perfect so far. I have no complaints about this product.
I haven't installed it yet but it looks fine to me
Very nice. Everything fit perfect
Couldn't have been easier to install.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
2/21/2024
I have gotten in contact with the manufacturer and I see that part # C51432 (Curt Custom Wiring Adapter for Trailer Brake Controllers) is only a confirmed fit for the 2014 e350 Super Duty, not the 2024. So, it does not seem like it was your installer wiring it incorrectly. I am sending in this information to our fit guide team for them to get this corrected on our site. I am sorry for the inconvenience, let me know if there is anything I can do for you.