Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
(91 reviews)
Price: $427.50
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
Item # C15809
Retail:$764.53
Our Price: $427.50
You Save: $337.03
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (91)
- Q & A (0)
- Photos
2011 Ram 2500 - Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- Class V
- 2-1/2 Inch Hitch
- 20000
- Visible Cross Tube
- CURT
- 2700
- 20000 lbs WD GTW
- 2700 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your 's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2-1/2" x 2-1/2"
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 20,000 lbs
- Maximum tongue weight: 2,700 lbs
- Maximum TW when used with weight distribution: 2,700 lbs
- Maximum gross trailer weight: 20,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15809 CURT Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty- 2-1/2"
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Tech Tip
No drilling required for installation , Requires factory bumper for installation
Complete Towing Package for 2011
Retail:$1,211.48
Package Price:$891.93
2011 Ram 2500 Owners Who Purchased This Trailer Hitch Also Bought...
Popular Trailer Hitch Accessories
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" - C15809
Average Customer Rating: 4.7 out of 5 stars (91 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Tracy02/02/2024
Fit great I cut the crossbar off old hitch. I needed the old brackets to mount the bumper back. Lost a bolt trailer sent the whole mounting hardware thanks
by: Joe O.08/15/2018
2011 Ram 3500
BEAST MODE ON! This thing is HUGE! I used to have a receiver integrated into a Ranch Hand bumper but found that massive bumper was only attached via the stock bumper brackets and we almost lost a 11k lbs trailer load recently. We upgraded to this massive CLASS V hitch and we are impressed. Super easy to install with a 2nd person.
My only complaint is it sits a little far back when used in combination with a Ranch Hand bumper such that the hitch was about 4" short of making it to the hole for the pin or for the pintle latch to open. So when you have a plasma cutter you simple just make it fit ;)
by: Kirk10/29/2023
2003 Dodge Ram Pickup
Very nice hitch receiver kit for my 2003 Ram 2500 HD. Very well manufactured and complete hardware kit. Took me almost two hours from start to finish by myself. Hardest part is raising the hitch into place by yourself and the bumper bracket welded nuts that interfere with the rear part of the mounting brackets (shown with white arrows). The installation instructions do mention this issue. To solve, I removed the three bolts each per bracket on each side. Raised receiver up at an angle and attached frontmost hardware loosely. Then jacked the receiver up with floor jack until just touching nuts. I then pried prybars between the bumper bracket and receiver mounting flange until the receiver would clear the nuts and jacked up to frame contact. Removed prybars and installed remaining hardware and shims as required. Fishing wires supplied in hardware kit made the install of the four carriage bolts a breeze. Just awaiting my new hitch now!
by: Jim 04/29/2024
Don’t hesitate to buy this if you’re looking for a heavy bumper pull it’s huge beefy I don’t have to worry about it
by: Anthony12/14/2023
One of the boxes was busted open and all of the pieces were falling out. Probably need to redo packaging on the torque lift camper tie downs. Very poor packaging
Jenny N.
12/14/2023
Oh no! I will have our Customer Service team reach out to you in case anything is missing.
by: Richard02/17/2018
Dodge Ram Pickup
The hitch took a few days to ship once it got to the final shipping location the package was damaged and shipped back to etrailer (ups shipment fault not etrailer) without me ever seeing the box. I called etrailer and they shipped a new one out within minutes. Talk about awesome. It arrived in a few days unharmed. As far as installation on my Dodge Ram 3500 dually, it was pretty straight forward. There was one issue. The most forward bolt had to have a rectangle steel piece, that must be fished through the frame rail. This step was a nightmare and I ruined one of my telescoping magnets. Overall great product, heavy and the finish looks great.
by: John 04/22/2024
Super easy to install, you will need help lifting up to the bolts. Help is needed for 5 minutes or less. Took me 35 minutes working on the ground.
by: James07/15/2022
Wow, now this is a heavy duty Hitch Receiver, I was very doubtful that I would be able to install this hitch by myself but with the right equipment on hand, a floor Jack and some large Jack stands I was able to lift it into place, secure all the bolts and tighten everything up. This all took me a little over an hour to complete but I did it. I’ve already hooked my 26’ Cargo Mate 12K GVW trailer to it. One thing I was a bit disappointed with was that the 10” drop I purchased earlier from etrailer is now too low and close to the ground, if I invert it, the ball will be too high. My air bags may give me the necessary clearance from the bottom of the drop to the ground so I may be ok for my 2,200 mile drive south. Great product thus far, additional review post drive. One other item that puzzled me was the 2 extra shims which I had to assume went between the forward receiver and the frame due to the space that was left from a weld point on the frame
Sierra K.
7/19/2022
This fits a variety of different Rams so #8 on the diagram in the instructions says to use as needed.
by: Rick C09/14/2017
2003 Dodge Ram Pickup
Exactly as advertised, easy installation. I purchased this hitch to avoid spending well over a thousand dollars on a torklift system. The torklift system is awesome if your towing a community behind your truck, i am only towing my motorcycle. There doesn't seem to be much in between the extremes for hitches that accommodate hitch extensions. As fore warned by the etrailer staff this hitch did not allow the use of my standard Torklift camper tie-downs. So i had to modify the tie-downs and have some welding done to compensate for the modifications. I am very happy with the installation and believe the hitch and extension will allow me to tow my cycle trailer with zero issues. Thanks etrailer!
Rickc
9/14/2018
Great product. Meets my expectations and needs
by: Jordan09/25/2022
Excellent hitch! I've had a 35' bumper pull camper that weighs nearly 10,000 lbs loaded down and I pulled my brother's 8,000 lb camper with it along with my 4,000 lb SXS and it keeps its shape. As long as you add the right amount of shims and tighten all bolts, you shouldn't have any complaints. I did have to trim my aftermarket bumper in order for me to get a ball on, but the bumper looks better now in my opinion.
by: Larry 05/09/2024
The good thing about your product everything was there that I needed when I installed it
by: Rick06/26/2022
The only issue with the receiver hitch is that it dropped approximately 3" lower than the original hitch. Obviously a ground clearance and trailer hitch adjustment situation.
by: George S.08/22/2019
Installation is easily done in 30 minutes in the driveway. Some maneuvering is needed to get the Curt receiver past the factory receiver mounting brackets. There is a clearance issue between the Curt receiver and a factory crossmember on both sides which can be remedied by adding a 3/4" grade 8 washer between the receiver and the frame on each side. It is easiest to torque down the four vertical bolts before installing the two horizontal ones as they interfere with getting a socket on the two rear vertical bolts. Curt did a good job eliminating all failure points (bolts) on the receiver hitch itself and the welds are solid. Overall the Curt receiver is overkill in a good way and it would be hard for even a good fabricator to design one that is stronger. Included are pictures of how it looks on a relatively tall factory height 2009 Dodge 3500 DRW with a 6" Fastway drop and 1220 pounds of tongue weight.
by: Jason 08/17/2023
Has held up great. Didn't care for two hitches, removed factory one. I use the Curt for everything.
by: Elmer 08/27/2023
Easy installation. Quality receiver hi tch.
by: Chris 03/20/2024
Easy install
by: Stephen W08/18/2023
2014 Dodge Ram Pickup
Once again I received the excellent service that I have become accustom to from etrailer!
Thanks everyone!!
by: John09/16/2020
2012 Ram 3500
Very strong hitch. Simple, straightforward installation. One person install with ratchet strap and floor jack.
by: Greg09/10/2020
2014 Jeep Grand Cherokee
Great hitch, fit right up underneath factory one on my 04 3500 dodge. Little bit hard to get bolts in, recommend having small retractable magnet to help pick them up or retrieve if you drop inside frame.
by: Kimberly 10/24/2023
It’s a great product easy to install and works very well. I would recommend it.
by: Harvey 10/18/2023
Awesome Produt he does what I needed to do and pull my equipment around
by: Cassidy06/18/2021
Build quality is good, install was basic. Look is awful, most of these I have installed replace the factory hitch and install tight to the bumper, this one hangs below the factory hitch and looks out of place on the pickup. I considered sending it back but shipping would have been half what I paid for the hitch,
Cassidy
6/19/2022
Hitch is working as it should, and I tow heavy daily. Hitch still looks terrible though. I get questions all the time asking whats wrong with it of if its broken. Operates perfect, just doesnt look that good.
Jenny N.
6/22/2022
You mentioned that the hitch looks terrible and I wondered if you were referring to how it appears under the factory hitch or if the powder coat has become scratched. For a 2009 Dodge Ram 2500 or 3500 with a factory hitch, there is a Draw Tire hitch part # DT45509 which requires the factory hitch to be removed. There is drilling required to install, does not fit cab and chassis 34 inch frames, only fits models with an 18 inch spare tire or smaller under the vehicle. Bigger tires will not be able to be stored under the truck. If the hitches powder coat is marred as will happen over time, I recommend touching it up with a rust resistant paint like Rustoleum.
Helpful Links
by: Skutumpahman08/01/2021
The quality of the hitch is outstanding. The installation instructions are a little lacking in my opinion. But the hitch is top notch.
Skutumpahman
8/2/2022
I was worried about the ground clearance on my Dodge as I live a considerable distance off pavement. I am surprised that I have been able to pull loads up to 15K and havent bottomed out even going through creeks and washes. I am sure the time will come that I do but it hasnt happened so far. I am pleased with the hitch.
by: Todd M07/04/2017
2012 Ram 3500
Five star for price and shipping. Three star to curt. The hitch is square with the truck. Where the ball hitch slides in is not square with the rest of the hitch. The ball hitch sits at a 6:30 position. Works fine, looks bad.
Todd M.
7/6/2018
Tough hitch, I wish the receiver part was 1/2 longer so I could use weight safe hitch in up position. It does not stick out as far as stock so it hits bumper in up position.
25
92
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Recommended Trailer Hitch to Replace Factory Hitch on 2007 Dodge Ram 3500The best Class V trailer hitch available for your 2007 Ram 3500 is the Draw-Tite # DT45509, This is the only option available for your truck that's designed to fit right under the bumper only when the factory hitch is removed, meaning it will sit just below the rear bumper to maintain ground clearance and a factory appearance. I have attached a couple customer submitted images so you can get a better idea of this. The only drawback of this particular model is that it does require a more...
view full answer...
- Recommendation for Installing a Hitch on a 1995 Ford F700 Dump TruckSince we do not have any confirmed hitch fits for your 1995 Ford F700 your best option would be to find a very qualified fabricator in your area, explain to him what you are trying to do and then let him make you something that will work. We have some universal fit hitches, but none of them have the capacity (or even close) to what you would need so I would not recommend them.
view full answer... - Recommended Upgraded Trailer Hitch for a 2015 Ram 2500The trailer hitch I recommend for a 2015 Ram 2500 Short Bed is the Curt Trailer Hitch Receiver part # C15409 for 2" or part # C15809 for 2-1/2". The Curt Trailer Hitch will fit models with the long bed or short bed, models with or without the factory trailer hitch, as well as models with the gas or diesel engine. The Curt Trailer Hitch also offers a bolt-on installation. In regards to weight capacity, these options will both exceed the vehicles capability so there should be no worries here. If...
view full answer... - 2004 Dodge Ram 2500 Class V Hitch to Replace OEM HitchThe Curt Trailer Hitch Receiver # C15809 is designed to fit with the OEM hitch on your 2004 Dodge Ram 2500. In fact, this is meant to fit under the OEM hitch so you wouldn't even need to remove it. For something that will fit more in the range of where the OEM receiver sits you're going to want the Draw-Tite # DT45509 instead. Once installed the receiver will actually hug the bumper as you can see in the attached photo.
view full answer...
- Will the Reese Hitch Extension RP45018 and Curt hitch C15809Yes, you can use a Titan Hitch Box Extension # RP45018 with the Curt Hitch 15607 that you referenced. The # C15809 is also confirmed to fit your 2008 Dodge Ram 3500 with a factory hitch. You should note the different capacities the # RP45018 has. If you use it at the full 48 inches of length it has a 4,000 lb capacity. Or if you cut it off to use it as a 41 inch extension you would have a capacity of 5,000 lbs.
view full answer... - Class V Hitch Recommendation and Extension for a 2012 Dodge Ram 3500 with CamperYes, the Curt Hitch part # C15809 would be an excellent choice for a hitch for your 2012 Dodge Ram 3500 with factory hitch. I attached an install video for you to check out. For an extension you could also use the Titan Hitch Extender part # RP45292.
view full answer... - Best Trailer Hitch for a 2006 Dodge Ram 3500 with the 2" OEM Trailer HitchI recommend using the Curt Trailer Hitch Receiver # C15809 for your 2006 Dodge Ram 3500. This is a Class V trailer hitch with a 2-1/2" receiver. It has a Gross Towing Weight (GTW) rating of 20,000 lbs and a Tongue Weight (TW) rating of 2,700 lbs. Keep in mind that your Ram 3500 needs to be rated for those weights to tow at the full capacity of the trailer hitch. This trailer hitch requires that the factory bumper still be installed, but it can actually fit under your OEM 2" trailer hitch....
view full answer... - Which Class V Hitch for 2004 Dodge Ram 2500 has the Best Ground ClearanceThe Class V hitch we have for your 2004 Dodge Ram 2500 with the best ground clearance is the Curt hitch part # C15809. It doesn't tuck right under the rear bumper like what you can see in the attached picture but it does sit the highest.
view full answer...
- Trailer Hitch with High Capacity Recommendation for 2011 Ram 2500 with Factory HitchYou'd have to check the factory hitch of your 2011 Ram 2500 for a capacity listed on it as it will be stated on it typically on a sticker. We have the Curt hitch part # C15809 which is a confirmed fit for your truck and has a capacity of 20,000 lb trailer towing and 2,700 lb tongue weight. You'd also want to check the towing capacity of your truck that's stated in the owners manual and be sure not to exceed this figure too.
view full answer... - Class V Trailer Hitch For 2007 Dodge Ram 3500 With Factory HitchYes, the Draw-Tite Trailer Hitch Receiver # DT45509 will fit your 2007 Dodge Ram 3500 with the factory hitch. This is a nice option, but I do recommend instead considering the Curt hitch: - Curt Trailer Hitch Receiver # C15809 While the Curt hitch will go under your Ram's OEM hitch instead of replacing it, this hitch is a much easier install that does not require lifting the bed off the frame like the Draw-Tite does, and also has a more robust towing capacity at 20,000 lbs. So if it were...
view full answer... - Can a Trailer Hitch be Installed on a 2006 Dodge Ram 2500 with Ranch Hand Bumper InstalledIf the ranch hand bumper is the same thing as a cowboy bumper or deep drop bumper then none of the hitches for the 2006 Dodge Ram 2500 are confirmed to fit because they are not tested on truck models with alternate bumpers. You would have to put the old bumper back on. If the factory hitch is the one welded to the frame then you would need # C15809 if you did install the factory bumper. This hitch fits below the factory hitch. I have linked instructions and a video showing installation...
view full answer... - 2-1/2 inch Trailer Hitch Recommendation for 2008 Dodge Ram 3500 for Use with Hitch ExtenderYou are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part # C15809 which is a confirmed fit and would work well. I attached an install video for this hitch for you to check out as well.
view full answer... - Towing and Payload Capacity of 2015 Ram 2500I looked up your 2015 Ram 2500 Tradesman and it looks like it has a towing capacity of 11,020 to 11,870 lbs depending on how it is equipped. The payload is then between 2,187 and 3,043 lbs. For a Class V hitch from Curt that does fit your 2015 Ram 2500 the Curt # C15809 would be a great option confirmed as a fit. The hitch you referenced does not fit your truck. This hitch has actually more towing capacity than your truck so you'd get to take full advantage of your truck's towing capacities.
view full answer... - Towing Capacity of Curt Trailer Hitch Receiver C15809 Without a Weight Distribution SystemThe gross towing weight rating for the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" part # C15809 is 20,000 lbs with or without the use of weight distribution. The tongue weight rating is also 2,700 lbs with or without the use of weight distribution according to Curt. You do want to make sure you are not exceeding the tow weight rating for your vehicle that can be found in the owners manual.
view full answer... - High Capacity Hitch and Extension Recommendation for 2005 Dodge Ram The Curt hitch part # C15809 is a heavy duty hitch confirmed as a fit for your 2005 Dodge Ram 2500. It has incredibly high towing capacities at 2,700 lb tongue weight and 20,000 lbs total trailer weight. For a longer hitch extension that would fit the hitch and give you the length you need we have the Curt extension part # C45048. Here are the capacities of the extension when used at the longer 34 inch length. Maximum gross trailer weight: 4,500 lbs Maximum GTW when used with weight...
view full answer... - Recommended Trailer Hitch Receiver for 2005 Dodge Ram 1500 Rumble Bee With Factory HitchFor your 2005 Dodge Ram 1500 Rumble Bee I recommend the Curt Trailer Hitch Receiver # C15809. This is confirmed to fit the Rumble Bee and designed to install below the factory hitch. If you want to remove the factory hitch you also have that option. This has a maximum gross trailer weight of 20,000 lbs so you won't have any problems with capacity.
view full answer... - Class V Trailer Hitch Receiver Capable of Towing 20,000LBS For a 2003 Dodge Ram 3500Yes, the Curt Trailer Hitch Receiver # C15809 will fit your 2003 Dodge Ram 3500. This receiver is capable of fitting with the factory receiver still installed or no factory receiver present, That is why it looks different from your factory receiver in the image. You must have the factory bumper for the receiver to install properly. This receiver will support the towing capacity of 20,000lbs you need.
view full answer...
- Will the Curt Class V # C15809 Fit 2006 Dodge Ram 2500 Mega CabThe Curt Class V Receiver you referenced, part # C15809 is a fit for your 2006 Ram 2500 Mega Cab. The hitch is designed to fit below the OEM hitch (if present) and will not fit Hemi Sport Quad Cab and SRT-10 models. You might also need the following: Wiring harness, part # 118381 Ball mount, part # RP45323 2 inch trailer ball, part # A-90 2-5/16 inch trailer ball, part # 19286 To see the install instructions, click on the provided link.
view full answer... - Will Curt Trailer Hitch Receiver # C15409 Fit 2006 Dodge 2500 Mega Cab With OEM HitchThe hitch you have referenced, Curt Class V Trailer Hitch Receiver, part # C15409, is a 2 inch receiver, and can be installed along with an OEM receiver, on your Dodge Ram 3500. The towing capacity for this hitch is 17000 lbs, and it also has a tongue weight capacity of 2550 lbs. No ball mount, clip or pin is included, so I would recommend B&W Ball Mount, part # BWBMHD30010. I would also recommend Pin and Clip, part # PC3. For a 2-inch hitch ball, I would recommend part # A-90. It has a...
view full answer...
- Class V Trailer Hitch Recommendation for a 2008 Dodge Ram 3500 with Factory Trailer HitchEven if you have a factory installed hitch on your 2008 Dodge Ram 3500, you can still use Curt hitch # C15809. The Curt hitch will fit beneath the factory hitch and provide you with a 2-1/2 inch receiver. I have included a link to the installation instructions for you to view. I also recommend etrailer ball mount kit # EBMK25318. It comes with a ball mount, ball, and storage bag.
view full answer... - How To Use 34 Trailer Hitch Extender In 2006 Dodge Ram 2500I have a replacement trailer hitch receiver option for you, but the longest extension compatible with the factory 2" trailer hitch receiver on your 2006 Dodge Ram 2500 is the 19" extension # RHSE. To get a 36" extension you will need to install the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15809 which will fit directly underneath your factory hitch and give you a 2-1/2" receiver. With a 2-1/2" receiver you can use the Titan Hitch Box Extension for...
view full answer... - What Is The Heaviest Duty Trailer Hitch Receiver For A 2003 Dodge Ram 2500?The highest rated trailer hitch receiver that is tight to the rear bumper of your 2003 Dodge Ram 2500 is going to be the Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15704 which is rated for for 2700lbs tongue weight and 18000lbs trailer weight. Its going to come down to being ok with a hitch that sticks down a bit lower like the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15809 so you can get the 20000lb trailer weight rating, or if...
view full answer... - CURT Trailer Hitch # C15809 Recommendation for a 2012 Dodge Ram 3500Yes, this CURT Trailer Hitch # C15809 is confirmed to fit on your 2012 Dodge Ram 3500 Megacab. I attached installation instructions for you to check out also. You may also be interested in the following items to complete your towing setup: etrailer.com Ball Mount and Ball # EBMK25318 Draw-Tite Wiring # 119178KIT Pin and Clip # 37201065
view full answer... - Curt Trailer Hitch Fit on 2008 Dodge Ram 3500 With Factory HitchThe Curt Hitch # C15809 that fits on your 2008 Dodge Ram 3500 sits directly below the factory hitch, as you can see in this photo a customer provided of his hitch installed on a 3500. Though we have not test fit this hitch on an '08 Ram 3500, we have fit them on similar model years and found there is - approximately - less than 18 inches from the ground to the bottom of the hitch. I would not be able to confirm that exact distance on your truck but that should give you a general idea...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Jared G
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe O.
8/15/2019
Love it. No problems since I installed it and Im a mad man on the road even with a heavy load. I never feel like the receiver is going to fail me. I havent gotten to use the 2.5 pintle hitch function yet but but I have no doubts it will work as advertised.