Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• Hitch for 2019 Chevrolet Camaro ZL1
  Curt has confirmed the fit of their Class I hitch # C11900 on the 2019 Chevy Camaro ZL1. The Curt hitch bolts on using the included hardware pack and provides a 200-lb tongue weight rating. Installation instructions are linked for you. If you will be using a compatible bike rack like the Kuat Transfer # KU74FR or a cargo carrier like the Curt # C18110 you'll want to use Curt Support Strap # 18050 to support and steady such items. You can use a compatible carrier up to the hitch's 200-lb...
  view full answer...
• Curt Hitch C11900 for 2016 Chevy Camaro
  The Curt hitch # C11900 that fits your 2016 Camaro has a shipping weight of 24-lbs. This figure includes the weight of the supplied mounting hardware and the shipping carton. You can refer to the linked video to see an installation on a different car. The written instructions are linked too, and these give you the step-by-step process and also a list of the specific tool sizes you'll need. You can review these ahead of time if you like so you have everything ready for your installation. If...
  view full answer...
• Will Curt Class I Trailer Hitch Receiver Fit 2016 Chevrolet Camaro SS
  The Curt Class I Receiver Hitch # C11900 that you referenced is confirmed to fit all models of the 2016 Chevrolet Camaro, so it will work well for your Camaro SS to carry a Class I compatible bike rack. I checked the instructions to see if any bumper fascia trimming is required for this hitch on your vehicle. The instructions indicated that the center, inside, lower edge of the fascia may need to be trimmed if necessary, and that the hitch is intentionally designed to be close to the...
  view full answer...
• Trailer Hitch and Wiring for a 2016 Chevy Camaro
  The 2016 Chevy Camaro will require a new hitch which is # C11900. Hitches for the previous generation will not fit. This is a Class I trailer hitch with a 1-1/4 inch receiver. The owner's manual states the vehicle is not designed or intended to tow. It doesn't say you can't so towing is at the user's discretion. The correct ball mount to use is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you can use # C59236. If you want to use the...
  view full answer...
• Correct Trailer Hitch for a 2016 Cadillac CTS-V
  Sorry for any confusion we may have caused you but I can confirm with 100% certainty that the Curt Trailer Hitch Receiver part # C11900 is a fit for a 2016 Cadillac CTS-V. This is actually the only trailer hitch available for this vehicle as well and I did check with Curt directly for you to confirm fit. If you don't already have a bike rack, my favorite is the Kuat Transfer V2 Bike Platform Rack part # KU74FR because it is lightweight and easy to load your bikes onto due to the open frame...
  view full answer...
• Trailer Hitch Receiver for a 2018 Chevrolet Camaro ZL1
  Yes, the Curt Trailer Hitch Receiver part # C11900 is a confirmed fit for your 2018 Chevrolet Camaro ZL1. I called my contact at Curt to confirm this. This hitch has a class I rating with a 1-1/4" receiver tube opening.
  view full answer...
• What is the Ground Clearance Measurement with Curt Trailer Hitch Installed on 2016 Chevy Camaro SS
  I don't have an exact ground clearance measurement for Curt hitch # C11900 and a 2016 Chevy Camaro SS. But if you look at the picture I have included you will see that the top of the receiver is directly below the bottom-most part of the rear fascia. If you measure from the ground up to that point and then subtract about 1/4 inch that will be where the top of the receiver will be. You will most likely need a ball mount with a rise in it but that is true for many applications. Figuring...
  view full answer...
  
• Installing Curt Class I Trailer Hitch on 2018 Chevy Camaro
  The Curt Class I Receiver Hitch # C11900 referenced in your question is confirmed to fit your 2018 Chevrolet Camaro. This is a very nice, Class I hitch that will provide you with a 1-1/4 inch receiver opening and a 200 pound tongue weight capacity. We do not have any particular recommended shops in your area, so I recommend simply taking your vehicle up to any local mechanic or shop that has a good reputation. While this hitch does have a relatively difficult installation process, any...
  view full answer...
• Curt Trailer Hitch for 2017 Chevy Camaro
  The Curt hitch part # C11900 is a great choice for your 2017 Chevrolet Camaro. It is a class I hitch with a 1-1/4" receiver. When you use this hitch with an unsupported load, Curt requires you to use a stabilizer strap # 18050 to brace the load.
  view full answer...
• Does Curt Hitch # C11900 Fit 2020 Chevy Camaro
  Yes, the Curt hitch part # C11900 is a confirmed fit for the 2020 Chevy Camaro.
  view full answer...
• Recommended Trailer Hitch on 2018 Cadillac CTS-V
  Yes, we do have parts that'll fit your 2018 Cadillac CTS to tow a trailer. From what I've found your car has a maximum capacity of 1,000 pounds tops. You didn't mention the size or weight of the trailer but just make sure you stay within this limitation. I also recommend checking your owner's manual just to verify the number. To fit the Cadillac you want the Curt hitch # C11900. It's a custom fit for the Cadillac and also has a concealed cross tube so you won't be messing with the...
  view full answer...
  
• Is There a Trailer Hitch for a 2017 Chevy Camaro Convertible
  Yes, we do have trailer hitch options for a 2017 Chevrolet Camaro Convertible. I recommend the Curt Trailer Hitch Receiver part # C11900. This trailer hitch feature a bolt-on fit with 1-1/4" receiver opening that is great for everything from towing to hitch mounted accessories like bike racks and cargo carriers.
  view full answer...
• What Hitch Fits My 2014 Cadillac CTS Sedan?
  Help is on the way! For a hitch that absolutely fits your 2014 Cadillac CTS base model Sedan, that is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11900. I went ahead and confirmed the fitment with Curt. This hitch comes with a concealed crosstube to and eliminates the bulky eyesore of exposed tubes. It also comes with a premium gloss overcoat over the base powder coat that gives you ultimate protection against rust and corrosion.
  view full answer...
• Trailer Hitch Receiver to Fit a 2018 Chevrolet Camaro
  We only have one trailer hitch receiver that fits the 2018 Chevrolet Camaro it is a Class I hitch; the Curt # C11900. I looked up the owner's manual for the Camaro and it has no rating for Chevy about towing and it does not recommend being used for towing at all. In this case there's normally not a hitch rated any higher than a Class I designed the vehicle.
  view full answer...
• Why is Hitch Made for 2017 Chevy Camaro if Towing isnt Allowed
  We always recommend sticking with the towing restrictions and guidelines for a vehicle like your 2017 Chevy Camaro but we offer hitches for vehicles like this because some people use them to carry bike racks like part # HR200Z. Also there are a lot of people who ignore these restrictions and continue towing regardless.
  view full answer...
• Trailer Hitch Recommendation for 2018 Cadillac CTS
  For your 2018 Cadillac CTS we have the Curt part # C11900 which fits the V and the non-V models of the CTS so it would work great. For trailer wiring the # C56207 is the best way to go too.
  view full answer...
• Trailer Hitch Recommendation for a 2016 Cadillac CTS
  The Curt hitch you referenced part # C11900 fits the sedan models of the 2016 CTS and CTS-V so it would fit and work well for you. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported...
  view full answer...
• Hitch Recommendation for 2020 Chevy Camaro
  We've found that the Curt # C11900 to be a great hitch and it is a confirmed fit four your 2020 Chevy Camaro. It is a class I and has a 1-1/4" receiver. If you'll be doing some light duty towing, you'll need a trailer wiring harness, a ball mount and a trailer ball to complete your towing system. For wiring, I'd recommend part # C59236. Use # C45521 for a ball mount and # A-80 for a 1-7/8 or # A-82 for a 2-inch diameter trailer ball.
  view full answer...
• Are Stabilizer Straps Required for Curt # C11900 Hitch When Used With Cargo Carrier?
  Curt requires the use of # 18050 stabilizing straps on the hitch # C11900 for non-supported loads like bike racks or cargo carriers like the Curt # C18145 cargo carrier. I really like how well hidden this hitch is. If it were me, I would add the etrailer # 22281 rubber hitch cover. I looked into the installation instructions, and among the typical tools required, there were a few special tools that you should consider getting to make the install go easier and faster. You may want the...
  view full answer...
  
• Trailer Hitch Receiver For Carrying a Bike Rack With a 2023 Chevrolet Camaro
  Yes, the Curt Trailer Hitch Receiver # C11900 will allow you to carry a bike rack on your 2023 Chevrolet Camaro. This class I hitch allows for you to use a bike rack like the Kuat Sherpa 2.0 # SH12G. The Kuat only weighs 32lbs thanks to its aluminum construction and is capable of hauling 2 bikes weighing up to 40lbs each. This carrier will fit bikes with 25"-29" wheels up to 3" wide and a wheelbase up to 47". If you have a 20"-24" wheel you will need the Adapter # 016-025-00-00 to fit...
  view full answer...
• Recommended Trailer Hitch for a 2016 Chevrolet Camaro
  The trailer hitch I recommend for your 2016 Chevrolet Camaro is the Curt Trailer Hitch Receiver part # C11900 because it has more bracing on the receiver tube when compared to its counterpart. This hitch is a custom fit, so no drilling is required, and it has a hidden design. In regard to installation, this does require that you remove the rear bumper.
  view full answer...
• Trailer Hitch and Bike Rack for a 2016 Cadillac CTS and 2 Bikes
  For your 2016 Cadillac CTS we have Class I trailer hitches with 1-1/4 inch receivers that would work well to carry 2 bikes. I recommend Curt trailer hitch # C11900. The installation will be a bit different if your Cadillac is the CTS-V model, but it will still use this same hitch. For a bike carrier that is compatible with the Class I trailer hitch I recommend the Swagman Trailhead, # S63360. It holds 2 bikes, can tilt down, and has a rise in the shank for additional ground clearance....
  view full answer...
• Trailer Hitch and Wiring Recommendation for 2015 Cadillac CTS to Tow Sea Doo
  Your 2015 Cadillac CTS has a towing capacity of 1,000 lbs so as long as the weight of Seadoo and trailer is less than that you'd be perfectly fine. The Curt hitch you are considering # C11900 is a great option as it's a confirmed fit that is mostly hidden and has plenty of towing capacity. Then for trailer wiring the # C56207 is also a fit and would work well. You'll also need the ball mount part # C45521 with hitch balls # A-80 for a 1-7/8 inch ball or # A-82 for a 2 inch ball.
  view full answer...
• Recommended Hitch for a 2024 Chevrolet Camaro
  Yes, it does! The Curt Hitch item # C11900 is custom fit for a 2024 Chevrolet Camaro. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. I have linked an installation video below so you can see how to get this hitch set up. If you are planning on towing you will also need a wiring harness item # 119250KIT and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for...
  view full answer...

Do you have a question about this Trailer Hitch?