B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights - White Powder Coated Steel
(23 reviews)
Price: $899.00
In Stock
B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights - White Powder Coated Steel
Item # BWPUCP7500WA
Our Price: $899.00
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (23)
- Q & A (0)
- Photos
B and W Headache Rack - BWPUCP7500WA
- With Load Stops and Tie-Downs
- Steel
- Louvered Headache Rack
- B and W
- White
- Drilling Required
- With Lights
- Includes Mounting Hardware
Prevent shifting cargo from crashing through your vehicle's rear window with this sturdy steel rack. The louvered screen won't obstruct your view. LED lights with chrome trim hardwire into your truck to give you brake, turn, and tail lights.
Features:
- Heavy-duty headache rack helps to protect the cab of your truck from shifting cargo
- Prevents cargo in truck bed from crashing through rear window
- Slat-style insert creates barrier without obstructing your view
- Horizontal louvers also help to shield you from the sun
- Built-in LED lights wire into your truck's lighting system
- 2 Innermost lights function as tail lights
- 2 Outermost lights act as brake and turn signal lights
- Chrome accents add style and flair
- Raised tabs at both ends act as load stops
- Lean ladders, lumber, or cargo against the rack
- Side-mounted handles help you get into your truck bed and also act as tie-down points
- Sturdy steel construction
- High-gloss, white powder coat finish resists corrosion
- Custom fit for your vehicle
- Mounting kit included
- Made in the USA
Specs:
- Bottom width: 72-1/2"
- Top width: 63-1/2"
- Height: 28"
LED lights are built into this headache rack. There are 4 lights. The 2 innermost lights tie into your vehicle's tail lights and the 2 outermost lights illuminate in tandem with your turn signals and brake lights. The entire lighting setup comes pre-wired so that you only have to connect a single harness to your truck's wiring to power all 4 of the lights.
This headache rack is also built with oversize tie-down points on both sides of the rack that double as handles. Not only can you lash down your equipment by running even wide strap through the anchor point, but you can also easily pull yourself up to access your truck bed.
PUCP7500WA B and W Custom Cab Protector - White
This Product Fits The Following Vehicles
- 1999 - 2016 Ford F-250 Super Duty
- 1999 - 2016 Ford F-350 Super Duty
- 2008 - 2016 Ford F-450 Super Duty
California residents: click here
Customer Reviews
B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights - White Powder Coated Steel - BWPUCP7500WA
Average Customer Rating: 4.7 out of 5 stars (23 Customer Reviews)
Prevent shifting cargo from crashing through your vehicle's rear window with this sturdy steel rack. The louvered screen won't obstruct your view. LED lights with chrome trim hardwire into your truck to give you brake, turn, and tail lights.by: Jeff08/04/2021
I like it. One of the side brackets were bent a little bit but I straighten it out when I installed it it looks great now
by: Richard02/03/2023
Was the right fit and all the parts were there ! I added the dot tape and I didn’t like the idea of splicing into the harness so I routed through the stake pocket and back to the bed plug ! It’s built pretty heavy duty ! I would of like the wires to be of better quality with a heavy rubber insulator but I put it in flex conduit. Just would’ve eliminated one more process! Took 18 min to install and another 30 for the lights ! etrailer made sure I had the right fit and product before it was shipped. They delivered faster than scheduled! I would definitely buy from them again!!!
by: Steven 12/21/2023
I have bought a number of items from Etrailer and this was me was no exception excellent customer service, fast shipping, great communication, fair pricing. This headache rack is built very well it is the nicest one that I own. Easy to install, strong as nails, looks great, top notch. Very happy with B&W and Etrailer (Brittney W.)
by: John01/07/2023
After doing research I decided on the B&W rack and I’m glad I did. Install was easy but I’d like to see them change a couple things. The rack is powder coated and I had to wire brush the bolts in order to thread the nuts on. Also I would like to see them have a pigtail for you wiring harness instead of having to splice into it. Other than that I would recommend this rack to anybody who wants a strong durable rack.
by: Joey06/08/2023
Great Headache rack, bad service, poor communication, bad shipper communication.Received it 5 days late, etrailer never returned phone calls once!!!!!
Stump, Texas
by: Freddy 01/12/2024
Very sturdy and high quality, easy to i nstall.
by: Jeff 11/03/2023
the shipping company had gouged and scrached the paint and finnish off in a couple of places, other than that it is a very nice and fit to a tee.
by: Jason 08/10/2022
Overall quality product that was easy to install. Took me about 30 minutes on my own to install it. Would reccoment this headache rack. One thing, since the rack is designed for the alumaduty Fords they could add some anti galvanic corrosion to the packaging.
by: Gabriel 09/11/2022
Really made a difference. The truck looks great.
by: John 07/28/2022
This worked well
by: Gomez, Geno05/16/2020
Excellent product. Sturdy and heavily m ade.
by: Steve 09/29/2021
Shipment was excellent and the product was better than expected
by: Samuel 07/16/2022
Great Product Fast Shipping!
by: Elmer07/15/2023
by: Josh 09/19/2022
by: Steve 03/25/2023
by: Ted 08/10/2022
by: William 08/25/2022
by: Tad 12/07/2022
by: Matt 01/21/2023
by: Oseas08/17/2022
by: Salvador 07/01/2022
23
23
See what our Experts say about this B and W Headache Rack
- Backup Sensors/Camera Turn Off After Plugging B&W Custom Headache Rack Into 2018 Ford F-250If that connector you are plugging into is related to the tow package wiring, then that is what is causing the problem on your 2018 Ford F-250. Basically, the truck thinks that a trailer is connected so it turns off the backup sensors (though I am not sure why it would shut off the camera) so that they do not alert you because they think the trailer is an obstacle. You can bypass this by hardwiring the B&W Custom Headache Rack # BWPUCP7500WA directly to the truck's taillight wiring. On...
view full answer... - Wiring The B&W Headache Rack Into A 2021 Ford F-350 Super DutyThe B&W Custom Headache Rack with LED Lights # BWPUCP7500WA is designed so that the two innermost lights will serve as taillights while the two on the outside work as brake/turn lights. These lights are fed by bonded 4-pole wiring like what is typically found in a 4-pole wiring harness. Your easiest solution is going to be to install a 4-way on the end of the wiring harness that comes with the headache rack like the # HM48110 using some heat shrink butt connectors # DW05743-5 for a water...
view full answer... - Easy Way to Wire B&W Custom Headache Rack to TruckThe B&W Custom Headache Rack with LED Lights # BWPUCP7500WA is designed so that the two innermost lights will serve as taillights while the two on the outside work as brake/turn lights. These lights are fed by bonded 4-pole wiring like what is typically found in a 4-pole wiring harness. Your easiest solution is going to be to install a 4-way on the end of the wiring harness that comes with the headache rack like the # HM38134 so that you can plug it into a 4-way installed inline with...
view full answer... - Easy Way to Wire Lighting of B&W Headache Rack to Truck Trailer WiringThe B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights # BWPUCP7500WA that you referenced uses standard 4-way wiring to power the lighting functions. So what you can do is install the # C55384 behind the 7-way of your truck and then wire a 4-way part # HM38134 to the headache rack and you'd have a very easy to install wiring setup.
view full answer... - Is B&W Custom Headache Rack for 2016 Ford F-350 Super Duty A Specific Shade of WhiteThe B&W Custom Headache Rack # BWPUCP7500WA that fits a 2016 Ford F-350 Super Duty is not any specific shade of white, such as Oxford white. It is a neutral white but I can't guarantee it has the exact same shade as your F-350 so there is another option for the same rack but black in color which you may want to check out. The black option for this rack that fits your 2016 Ford F-350 is the B&W Custom Headache Rack # BWPUCP7500BA.
view full answer... - What Gauge Steel Are the B&W Truck Cab Protectors/Headache Racks Made FromI spoke with my contact and B&W and the Custom Headache Rack # BWPUCP7500WA is made of 10 gauge steel except for the flat plates that attach to the bed sides. Those are 7 gauge. This rack is not tested with toolboxes or tonneau covers so it is difficult to determine if it will work in conjunction with those items. It likely will not work if the tonneau cover blocks the lip in the inner part of the bed sides.
view full answer... - 4-Pole Wiring Harness for 2017 Ford F-350 to Power Accessory Items with LightsIt sounds like you have an accessory like the B&W Custom Headache Rack # BWPUCP7500WA that requires your F-350's lighting signals to operate. Items like lighted hitch covers, headache racks and other aftermarket items with lights such as mud flaps will require the lighting signals found on a 4-pole trailer wiring harness. You can very easily add a second wiring harness to a truck with a factory 7-way by installing Curt 4-pole kit # C55384. This harness has two round U.S. Car type connectors...
view full answer... - Installing Wiring of B&W Headache Rack For 2014 Ford F-250We offer one headache rack that fits your 2014 Ford F-250 which has lights, which is made by B&W. There is not a separate splitter for this headache rack or other racks, it does require you to splice into your wiring, as you can see from the cut out of the directions I added. The headache rack that fits your 2014 F-250 is available in either Black or White, and are the following: - Black: B&W Custom Headache Rack with LED Brake, Turn, Tail Lights # BWPUCP7500BA - White: B&W Custom Headache...
view full answer...
- Does B and W Headache Rack Block Third Brake Light On Back Of Cab When Installed On 2013 Ford F-250I called my contact at B&W and asked about your 2013 Ford truck. They told me that the third brake light on the back of your truck cab would not be blocked when the Headache Rack, part # BWPUCP7500WA is installed. I have attached a photo of the headache rack and have noted the area B&W said the brake light would be in when the rack is installed. It is right between the small louver and the top bar of the headache rack.
view full answer...
- How to Wire Headache Rack w/ LED Lights on 2019 Ford Super DutyThe B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights # BWPUCP7500WA uses bonded 4 pole wire to make the connections, however most of the new Fords have a "smart" tow plug, which means that it is looking for voltage to see if the trailer is hooked up or not. That explains the messages on the dash. The best way to wire up the headache rack is to wire it directly to your Super Duty's electrical system, and bypass the trailer wiring. The factory harness is on the passenger side of...
view full answer... - Wiring Connections For B&W Custom Headache Rack On 2020 Ford F-350 Super DutyI believe you are asking how to wire the B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights part # BWPUCP7500WA on the 2020 Ford F-350 Super duty. The wiring harness to splice into the vehicle's wiring comes with the headache rack. I have listed the wiring colors from the headache rack harness to their corresponding functions. green- passenger side turning signal/brake yellow- driver side turning signal/brake white- ground brown- clearance running light
view full answer...
- Wiring B&W Custom Headache Rack # BWPUCP7502WA to Bypass Factory Wiring on 2017 Ford F-350I spoke with my contact at B&W regarding the wiring for the Custom Headache Rack # BWPUCP7502WA on your 2017 Ford F-350. He did say that the best way to bypass the factory 7-Way wiring (to avoid the dashboard messages) is to use the factory wiring on the passenger side of the truck. He said that this harness should be located in the same spot as the 7-Way plug, but simply on the passenger side instead. You will need to trace the wiring on the frame rail further back toward the tailgate/hitch...
view full answer... - White Headache Rack with LED Lights for a Ford Super Duty Pickup TruckYes, the B&W headache rack is available in white for your Ford Super Duty. It is # BWPUCP7500WA. It and the black version have the same cost. Current pricing is available on each product page.
view full answer... - Wiring B&W Custom Headache Rack with LED Lights BWPUCP7500WA on 2017 Ford SuperdutyThe B&W Custom Headache Rack with LED Lights # BWPUCP7500WA is designed so that the two innermost lights will serve as taillights while the two on the outside work as brake/turn lights. These lights are fed by bonded 4-pole wiring like what is typically found in a 4-pole wiring harness. On the passenger side frame rail is a wiring connector you can use to access signals. Use of this connector will not cause the dash light messages.
view full answer...
- Dimensions of B&W Custom Headache Rack w/ LED Brake, Turn, Tail LightsThe B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights # BWPUCP7500WA has the following measurements: Bottom width: 72-1/2" Top width: 63-1/2" Height: 28" This isn't a fit for your 1994 Dodge Ram 3500 so if you want it to fit you'll need to get creative. If you'd like a headache rack that is custom-fit for your pickup then we have the Aries Classic Headache Rack # AA111000 instead. This has a semi-gloss black powder coat instead of that white powder coat and it doesn't come with...
view full answer...
Do you have a question about this Headache Rack?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Updated by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.