To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.
Features:
Specs:
Heavy loads can cause the back of your vehicle to sag and add unnecessary stress to your suspension. This stress not only affects your brakes in a bad way, but your tires, headlight aim and handling suffer as well. To improve your vehicle's ability to endure heavy loads, you need to add support to your existing coil springs.
Air Lift's 1000 adjustable air springs have 1,000 pounds of load-leveling capacity and are made specifically to fit inside your rear coil spring suspension for additional load assistance. You can inflate and deflate these tough, molded polyurethane helper springs as needed, ensuring the perfect amount of support for every load, every time. Easily level your vehicle front to rear, and if you run dual air lines to the air springs at installation, then you can inflate the springs independently of one another for side-to-side leveling. Air Lift 1000 is a breeze to install with standard tools and comes with an easy-to-follow instruction manual.
Air Lift 1000 comes with manual inflation valves that are typically mounted on the bumper but can be installed anywhere on your vehicle for easy access. For even more convenience and control, you can add a compressor and gauge system (sold separately), which will let you monitor and automatically inflate your air springs.
Air Lift kits are designed to keep your vehicle at normal ride height. You can find the normal ride height of your vehicle by unloading it and measuring the distance between the bottom edge of your wheel well and the center of the hub. After you find and record this distance, you can regulate the amount of air that you put into your air springs to maintain normal ride height - even when you are hauling a heavy load. You will need to adjust the air pressure in your air bags according to the size of your load.
Air Lift is positive that you will benefit from their air spring suspension system - so much so that they offer a 60-day satisfaction guarantee. Install and use Air Lift 1000 springs for 60 days, and if you are not satisfied at the end of this time, you can remove them from your vehicle and return them for a full product refund.
Average Customer Rating: 4.7 out of 5 stars (1096 Customer Reviews)
1,000-lb Capacity. Upgrade your vehicle's rear coil spring suspension with this kit. Molded polyurethane air springs fit inside your existing coil springs for added support when hauling heavy loads. Improves handling, braking, and overall ride.Not too hard to install, well worth the effort as they made a very noticeable improvement to our Toyota RAV4 Hybrid even without the trailer attached.
With the tubing going under the suspension I don’t see it lasting long. The air bags looked a little short for the springs but I could not find if that was normal in the instructions. I don’t like the way the airlines are exposed to the ground. I believe I should have just gotten the upgraded rear springs.The air bags went in fairly easy after I deflated them and put the cap on to keep them deflated. I had to go through the side of the springs not the bottom as instructed. So far the air bags them selves are working properly.
We have a little roof top tent trailer that’s about 1750 lbs we tow with our RAV4 hybrid and it was squatting more than I wanted. These fixed the problem without altering my wife’s commuter permanently. I’m very impressed with the product.
Installation is not a walk in the park as far as getting the bags in the springs, and then once there in, getting them to seat right. So when you are ready to throw things across your shop, I verify it’s worth the struggle. I mounted my air valve just below the trailer plug in on the bracket. It looks clean, is easily accessible and it leaves the car intact. I routed the lines over the heat shield and made a casing with exhaust wrap because the 6” rule in the instructions is not realistic. I’m sure a casing and the heat shield should protect the hose.
Installed them on my rav4. They didn’t really do anything, except be loud and annoying. Every bump and turn squeaked like a pig going to market. After about 6 months of that I cut them out.
Brooke M.
11/18/2022
I reached out to Air Lift and they said that squeaking can be expected if your springs or coils have that hard rubber coating on them. They also said that if you inflate the air bags to the max and let them sit in the springs for a day, this will give them time to get seated so to speak and should reduce the squeaking.
Free shipping? Not at all. [online] is about $XX less. I have been running these bags on my 23 rav4 now for a few days and so far haven’t noticed a difference. They have not added any ride height. Sure they have stiffened the spring. I wanted an additional ride height to pick up my vehicles sag. I pull a 4x8 enclosed trailer. I wouldn’t recommend these to anyone. I feel they were a waste of money and overpriced for what it is. I’ll be returning them shortly.
So far so good. It arrived on time, installed fairly easy, and preformed extremely well on my 2019 Rav 4. Took care of the stock sagging issue I had from loading it up for camping.
A great addition, yet quite the challenge to get them inside the coil during installation
Great company to work with.
Makes to much noise like old car. I don’t know if Am going to keep it.
Andrew N.
10/12/2022
It sounds like the air bags are causing some noise, perhaps squeaks? In this case, typically the issue is that the coil or suspension components are rubbing on the air bags, or it could be that you torqued the bolts down with the vehicle in the air instead of with the vehicles weight on the suspension. I would try adjusting the air bags and make sure you tighten the bolts with the vehicles weight on the suspension.
Just perfect
Excellent service thank u Still have install them sometime
They work great. I’ve used them to align my boat, a utility trailer and the wheelchair carrier for my wife. Has improved the ride and gas mileage by making the combinations more aero Dynamic. I would purchase again and recommend them to others
Product arrived promptly. Very simple idea, but absolutely difficult as H&¿¿to install. Trying to squeeze the folded air bag between the coil Springs was an absolute nightmare. Maybe some springs on some vehicles have a larger spacing between the coil,but a 2019 Kia Sorento does not. It took almost 6hrs to install both sides. One trick that did help was to use a little silicone spray on the air bag where it was jammed into the coil spring. This helped make the bag slippery so it passed between the coil spring. Just don't get it all over the air bag or it will be too slippery to hold onto as you push it into place. The hose clamps are really a poor design, awkward to squeeze with pliers as you position them into place. So far bags appear to be holding air pressure. Time will tell has to how durable and dependable they will be.I installed them to assist with towing my camper and help reduce the squatting when towing.
Reviewing the Air Lift 1000 kit 60860 for Kia/Hyundai SUV
Installed in a 2017 KIA Sorento LX. Like many other reviews claim, this was not easy to install although the factory video makes it look so, so simple. I followed the instructions for the first bag, it took me 2 and ½ hours to get it inside the spring coil. I used an exacto knife for cutting the hole, which worked very well. Not having a spoon type tire iron, I eventually settled on the handle of a large crescent wrench. After inserting the bag ½ way in, using the wrench to push on the part already in the spring brought the rest of the bag further in. Eventually I finally got the first bag inserted although it was twisted. Inflating the bag straightened it out. Starting on the second bag, I noticed it was much more pliable. It had been sitting in the Florida sun for the past 2 ½ hours. I folded it down as instructed, then folded it in ½ lengthwise and used zip ties to secure it. After sitting in the hot sun for another hour while I hydrated, it only took me 10 minutes to get the 2nd bag inserted and needed no other tools to assist. Carefully snipped the zip ties off and it popped into place. Running the air lines was simple enough. The hose clamps are very fragile, be patient, be careful or they will break.
Overall I am quite pleased with the performance of the bags. They make a big difference in how the KIA rides when towing. They hold pressure and are easy to inflate & deflate. I use a bicycle tire pump as I have no need to modify the pressure in route and didn’t see the need to spend the money on a remote control inflation system.
Package arrived damaged,no parts missing or damaged, can't comment on product not installed at this time.
Jim
Installed this kit on our 08' sienna awd the day before a road trip. Install went fairly smooth. It did take a couple of attempts to get the air bags stuffed into the coil springs. Routed both airlines individually and mounted on lower bumper black trim just above the hitch. Held air at 35psi overnight, deflated to 25psi with cargo and hit the road. All seems well and the van handles better loaded.
Have to echo other positive reviews of this product. Makes the sienna even more versatile, and it is both affordable and a moderate diy project for shadetrees like me
its been a year of using the lift kit on the Jeep Wrangler Rubi (4door). no issues. did replace the clips with tighter fitting clips.
not much else to say. works as advertised.
Getting the tubing completely over the plastic barbed tee fittings is difficult at best without damaging the fittings. The bags will not hold pressure for more than a day. The metal barded fittings are much easier to use & get the tube seated properly. Recommend NOT using the plastic tee fittings.
Getting the bags inside the springs is a test of patience, flexibility, hand & arm strength within a confined area. This is not a quick installation AND make sure you're in the shade because you'll be sweating enough without the help of the sun.
Once everything was installed & inflated, the ride without the trailer was noticeably better & with the trailer, the bag end sag was completely eliminated. FYI, the ride of the KIA without the air bags & trailer is already very nice.
These air bags are very difficult to get into the coil spring. You must disconnect the shock absorbers and disconnect the brake line bracket. Also lubricant of some sort was most helpful. Connect the air lines while coil springs are fully extended. Otherwise you'll never get them in. Once they're inside some compressed air is helpful to blow up the bag. Once installed work quite well.
Product does exactly what it’s supposed to do. Install was fairly easy. Hardest part was getting the bags in the springs but it wasn’t terribly difficult. I tow a 3000 pound pop up camper with my jeep wrangler JL unlimited and it levels out my load no problem
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
6/9/2021
Thank you for your review. The bags press out on the coils to keep them from compressing instead of up and down. They are not designed to touch the top and bottom.