Fitment For Air Lift Air Bag Coil Springs For a 2020 Toyota RAV4 With Eibach Lift Kit Coil Springs
Question:
I have a 2020 rav4 xse Hybrid. I have the eibach springs most common lift for the ravs and they have helped with the height with no load in the car - when I load up to go camping not towing anything it sags way more than I’d like. Can I use Air Lift Kit 60842 on eibach springs? Another thread I read a user said he used air lift kit 60905 and said “ The 60905 is for a 3.5inch x 9.5inch spring, the 60842 uses a 3.44inch x 8.75inch stating they were similar enough and it worked fine for him. Because the eibach spring is a taller spring should I use the 60905 or the 60842?
asked by: TJ F
Expert Reply:
To verify which kit is going to be best for your 2020 Toyota RAV4 XSE with the Eibach lift springs you will need to measure your coil springs. The Air Lift 1000 Universal Air Spring Kit # AL45XV(60905) has a cylinder size 3.44" by 8.75” and includes 2 spacers allowing it to fit up to 9-1/2" tall. The Kit # AL64VJ(60842) has the exact same size cylinder but only includes a single 1/2" spacer. This kit was specifically designed to fit with the factory spring and I cannot verify if the Eibach springs you have are going to be the exact same diameter.
The Universal Kit # AL45XV(60905) above is the tallest available from Air Lift with the 3.44" cylinder diameter.
Products Referenced in This Question
Air Lift 1000 Air Helper Springs for Coil Springs - Rear
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Air Springs
- Light Duty
- Air Lift
more information >
Product Page this Question was Asked From
Air Lift 1000 Universal Air Spring Kit - Rear
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Air Springs
- Light Duty
- Air Lift
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What Options Are There For Rear Suspension Enhancement On 2016 Audi Q5 When Towing A Trailer?
- Q&A: How To Install Fifth Wheel Hitch Rails In A Chevrolet Silverado 2500 Short Bed
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Q&A: Seal With Dimensions to Replace 171255UC
- Article: How to Charge a Dump Trailer Battery
- Article: Trailer Maintenance Schedule