Replacement Air Gauge for Air Lift Load Controller Compressor System
(5 reviews)
Price: $61.54
In Stock
Replacement Air Gauge for Air Lift Load Controller Compressor System
Item # AL25194
Retail:$84.00
Our Price: $61.54
You Save: 27%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Videos (1)
- Photos
Air Lift Accessories and Parts - AL25194
- Air Suspension Compressor Kit
- Vehicle Suspension
- Gauges
- Air Lift
Replaces the air gauge and black bezel needed for your Air Lift load controller compressor system (AL25854 or AL25850).
Features:
- Fits Air Lift Load Controller Compressor System for Air Helper Springs (AL25854 or AL25850)
- Quantity: 1 air gauge and black bezel
25194 Replacement Air Gauge for Air Lift Load Controller Compressor System
California residents: click here
Video of Replacement Air Gauge for Air Lift Load Controller Compressor System
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Air Lift Replacement Air Gauge - AL25194
Hello, neighbors. Steven here with etrailer.com. Today, we're looking at a replacement air gauge for the Air Lift Load Controller Compressor System. Now folks, this does fit the Air Load Controller Compressor System for the Air Helper Springs, and I'll put those item numbers on the page here. Now do you do get one air gauge here, and one plastic bezel that would go in the back here. It would line up with the holes, you'd put the wire through it, and this would be your little plastic bezel casement.
They give you a nice length of cord here, and that's a look at the back. You got the two threaded screws here for installing. And in the front here, get a nice display. You got three different buttons here, down, up. And then that one would be doing them together.
So very nice, simple replacement air gauge for the Air Lift Low Controller Compressor System. I'm Steven. Thanks for watching. Have a great day.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Defective
- Wrong item was ordered
Customer Reviews
Replacement Air Gauge for Air Lift Load Controller Compressor System - AL25194
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
Replaces the air gauge and black bezel needed for your Air Lift load controller compressor system (AL25854 or AL25850).by: Roark12/30/2020
I bought these items to convert a inop remote controller to a dash mounted manual control air lift system. Attached wiring harness was only 5’6” long. I needed 11’ to reach my compressor. A local home improvement store had the needed wire. The wiring diagram Fig 2 on Etrailer.com Q&A is not clear, I could not read the numbers on the relay. However, I analyzed the wiring on the existing relay and was able to wire it correctly and everything worked when I turned on ignition.
by: Steven 07/27/2021
replacement for original which I broke
by: Tammy 08/10/2020
Customer service staff was extremely helpful and shipping time was a day earlier than anticipated.
by: Mike 06/21/2021
GOOD SERVICE !!!
by: Aaron05/26/2021
5
5
See what our Experts say about this Air Lift Accessories and Parts
- Parts Needed To Add a Air Tank And In-Cab Gauge To Air Lift WirelessAIR Compressor SystemIf you are planning to use a Air Tank # F9126 with your Air Lift WirelessAIR Compressor System # AL74000EZ you will need some fittings and air line to get a gauge installed. Between the compressor and manifold on the Air Lift WirelessAIR you will need to install a Air Lift Union Tee # AL21838 so that the air tank will be filled by the compressor directly. From there some Air Lift 1/4" Synflex Air Line # AL73RV will attach from the compressor to the air tank with a 1/4" Elbow # AL21837....
view full answer... - Does Replacement Air Gauge for Air Lift Air Bags Come with Mounting BracketThe Replacement Air Gauge # AL25194 comes with only the gauge and wiring. To add a mounting bracket you need the Mounting Kit # AL25196 as well. Attached is a review video for you to check out!
view full answer... - Wiring Diagram for Replacement Air Gauge for Air Lift Load Controller Compressor System # AL25194I checked with Air Lift and was able to find a wiring diagram for the Replacement Air Gauge for Air Lift Load Controller Compressor System # AL25194 and attached it to this page.
view full answer...
- Is the Wiring Shown Included with Replacement AirLift Gauge # AL25194The wiring harness you see pictured with replacement gauge # AL25194 is attached to the gauge assembly itself so it is included. You would just need to wire it in to the rest of the system and attach the air line to the back. If you also need the air line, AirLift has several options. For LoadLifter 5000, LoadLifter 5000 Ultimate, and Ride Control air helper springs use # AL20086. For AirLift 1000 rear kits use # AL22007 and for the front # AL22030.
view full answer...
- Can Light on Air Lift Air Gauge # AL25194 be Replaced with Different Color I spoke with my contact at Air Lift and he said that the Air Gauge # AL25194 for your Compressor System features a built-in light that cannot be replaced. The only way to modify the light in any way would be to simply cut the red wire (which powers the light) to kill the light altogether or run it to a dimmer switch in order to control its brightness.
view full answer... - Light On Air Lift Load Controller Compressor System Not FunctioningThe first thing I would check is the RED wire for proper voltage with a circuit tester # PTW2993. The red wire is your power wire, and will control the light power on your Replacement Air Gauge for Air Lift Load Controller Compressor System # AL25194 for the Air Lift Load Controller Compressor System for Air Helper Springs # AL25854. There could be a chance that your unit isn't receiving the proper voltage causing the light not to work. Since you mention your unit works properly, It also...
view full answer... - Does the Replacement Air Lift Air Gauge Come with the Black Mounting Cage Shown in PictureYes! The black cage-looking device does come with the Replacement Air Gauge for Air Lift Load Controller Compressor Systems # AL25194.
view full answer... - Recommended Air Springs Air Compressor System with 100 PSI GaugeFor your Air Bags on your truck, I recommend the Air Lift Load Controller II Compressor System for Air Helper Springs - Single Path # AL25592. This will give you a single gauge that will read up to 100 psi as requested and fill your air bags equally side to side. This system will allow you to adjust the level of your air springs at any time from the comfort of your cab. I've attached a video of this installation to assist.
view full answer... - Replacement Mounting Bracket for a 2 inch Air GaugeFor a replacement bracket that will hold a 2 inch gauge you will want the part # F5200. This will work well with your 2 inch gauge that you currently have whether it is a Firestone or an Air Lift product.
view full answer... - Dimensions of Replacement Air Gauge for Air Lift Compressor # AL25194 That Would Insert into PodI went and pulled a Replacement Air Gauge for Air Lift Load Controller Compressor # AL25194 to grab some dimensions to help you determine if it would fit in the gauge pod you have. The portion that would fit into the pod measure 2-1/2 long if you include the mounting studs. If you do not include the studs it measure 1-3/4 inches. The diameter is right at 2 inches as well.
view full answer... - Options for Dimming the Gauge Lights of the Air Lift Compressor SystemsThe red wire of the Replacement Air Gauge for Air Lift Load Controller Compressor System part # AL25194 is what powers the lighting for the gauge. You can run that wire to the dimmer switch of your interior lights on your 2011 Ford F150 and it will brighten and dim in conjunction with the interior lights.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Steven C
Updated by:
Wilson B
Updated by:
Matthew E
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steven
7/28/2022
Still working fine!