To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (29 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Everything fit as expected and install went smoothly.
Fits my 2016 Ford Police Interceptor Sedan. There are a couple of additional exhaust hangers on my vehicle as compared with the how-to videos for the Taurus. You may need to remove the muffler hangers to be able to pull the bolts through with the guide wire. The rear bolts behind the bumper were difficult to align with 1/2" holes. I wonder if the instructions could call for larger holes. The unit weighs about 45 pounds, so I needed help holding it in place while threading the nuts. My daughter helped with that part, and I did the rest myself. Took about 3 hours. (I don't typically do this kind of thing.) I would give 5 stars, but the hitch plate was welded crookedly to the rest of the unit. Fortunately, the hitch tube itself was apparently crooked in the opposite direction, so the result was a level hitch. I only plan to use it for a bike rack and such, so I'm not very concerned about this. The paint is also missing on several edges and isn't consistently smooth. Again, not a big concern for me, but something else to look at quality-wise.
Mounting, the MaxFrame 75670 Trailer Hitch, on 2017 Ford Taurus was a little tricky however the Video on mounting was spot on.
The spring tool (provided) for the two hidden bolts worked perfectly.
I now transport the wife's power mobility scooter when ever we are out and about. And I no longer have to disassemble and man handle the scoooter into and out of the trunk.
Happy Wife Happy Life!
Art S.
6/8/2021
With the scooter carrier in place it carries the load great with or without the scooter.bought a clamp to eliminate the rattle I was getting from slack in the hook up.
I had the hitch professionally installed. They had some issues running the electric all the way to the battery. Otherwise they reported no problems. It fits like the instructions said. The hitch was shipped and arrived at my installer as promised. I would use etrailer again.
Ken L.
8/8/2015
Works great. No issues.
Very solid hitch. Arrived in perfect condition with all the hardware needed. I watched the installation video for installation on my 2013 Taurus which was a big help. The installation went perfectly with only slight drilled hole modifications for bolt alignment. I did the installation by myself, and did not have the car on a lift, so it took about an hour and a half which was not bad, as most of the time was just disconnecting the exhaust and positioning the hitch. I would not hesitate buying another hitch for my Chevy and if i do, it will come from etrailer. Great company, EXCELLENT communications, and very fast shipment. Couldn't be happier. By the way, I also purchased the locking hitch pin, a bike rack, and padlocks all from etrailer. Very happy with these purchases too!!!!! If you are looking around for a better deal, just stop, and buy here, you won't regret it.
Thank you for the opportunity to provide this review. I should point out that I have 2012 Ford Taurus SEL, and the videos referenced 2011 and 2013 models.
The installation went off almost without a hitch, no pun intended. One issue did occur...there were two (2) holes that needed to be drilled out to 1/2". I drilled out both holes (left and right). During fit-up, my friend and I noticed that the slot on the hitch did not coincide with the drilled out hole on the left side of the vehicle (left when facing forward from the rear of the vehicle). The drilled out hole was a little too far inboard (towards the centerline of the vehicle) to be of use. We noticed that we could drill an additional 1/2" hole using the hitch slotted hole as a guide. We had enough material between the holes to prevent future tearout. We drilled the additional 1/2' hole, using the hitch slotted hole as a guide. Installation was textbook following that slight modification.
Thank you for the opportunity to provide this feedback.
Every other facet of the installation was perfect, just like the directions and videos. Thanks again!
Kevin
Great product with excellent instructions for installation.. fast shipping Thank you Thank you etrailer for making this a wonderful Hassle free experience
Tammy
4/8/2019
Thanks for the follow up! I am very pleased with the product it has served me well!! Well made and has held up very nicely
Very easy install on my 2016 Taurus SHO. Instructions are just OK but the videos are excellent and take the guesswork out of the install. Shipped super fast. Thank you
Mark G.
2/20/2018
More than happy. Thx
Product fit perfect on my 2010 Taurus. It’s heavy duty, good quality, welds look good, and no missing paint.
It was a little tricky installing the hitch. With some effort tho, most people could do the install themselves.
Great product, love the how to videos. Draw-tites instructions suck. Only complaint is the hitch had some scratches. Think it could be easily avoided with some more cardboard wrapped around the hitched below the plastic wrap. But other than that it's great!
I have been using etrailer for years now and have had nothing but great experiences with the quality of their products, availability and as everyone knows the best prices you can find on the internet. There is no other business that I have found that provides the level of customer service that they do. I have been in the automotive parts business for over 35 years and can tell you for sure that this will be website that you will want to put in your "favorites" folder.
Hitch fit extremely well and only took about an hour to install. I recommend etrailer.com and this hitch.
Easy installation with how to videos. Very nice fit and wireing kit worked great. Like it
Great instructions and the hitch was very well engineered to make the installation to my specific vehicle easier than expected. Thanks!
Fit my 2015 Ford Taurus Limited perfectly. Easy install, and tucks under vehicle nicely.
hitch worked great and fast shipping!!
install was almost plug & play great service, great product match & counseling.
Good product and easy to follow instructions for installation.
This whole process was easy .ordered and it was delivered 3 days later . I installed it in less than a hour and half after watching the video from the web site
Delivered as promised. I ordered from another company first and after more than 2 weeks of no response I decided to shop with Etrailer and I will always go to them first from now on...thank you so very much!
Product was very good quality. Ordering was very easy and shipping was very good.
Tried to call for a question and would have had to wait 11 min. so did wait. Phone message does not give option for asking questions.
Laura E.
7/22/2017
Matt, at this time, pressing option 3 at the recording will allow you to ask a product question. I hope this helps!
Still works, but didn’t tolerate much weight before it bent
Rachael H.
7/29/2019
This hitch has a capacity of 400 pound of vertical tongue weight and a towing capacity of 4,000 pounds when using a weight distribution system.
Great service. Great product. Great price. Been on my car for a year now and works like a champ so far.
Great product. Had a small amount of difficulty getting the rear bolts to find the holes but it wasn’t overly difficult. Overall it’s something nearly anyone could install.
Well engineered and built. 1/2 hour install time. It is a rarity to find any product of this quality. Thank for your effort in providing a high quality product.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tom
5/14/2022
So far, so good. No issues at all!