Go Power Automatic Transfer Switch - Plastic Case - 30 Amp - 120V
(22 reviews)
Price: $131.01
In Stock
Go Power Automatic Transfer Switch - Plastic Case - 30 Amp - 120V
Retail:$198.99
Our Price: $131.01
You Save: $67.98
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
11% prefer this
- All Info
- Reviews (22)
- Q & A (0)
- Photos
Go Power RV Transfer Switch
- 30 Amp
- 120V
- Go Power
This transfer switch automatically changes from inverter to shore power when you hook up at the campground. Protects your electrical system from AC power backfeed.
Features:
- Transfer switch automatically reroutes your RV's AC input from inverter power to shore power when activated
- Time delay function only allows one input to feed your RV's breaker panel at a time
- Protects system from AC power backfeed
- Black plastic case with cord knockouts
- Made in the USA
Specs:
- Amperage: 30 amps
- Voltage: 120V
- Dimensions: 8-5/8" wide x 7-3/8" long x 4-1/8" tall
- 2-Year warranty
This transfer switch has been pre-wired to automatically change the primary source of AC current from inverter to shore power to conserve battery life. To prevent electrical interruptions, the time delay circuit board allows the alternate power source to stabilize before a transfer occurs. Additionally, since the switch only accepts one active source, it protects your electrical system from dangerous backfeed that can damage your equipment.
Automatic Transfer Switch Installation
There are several wiring configuration options, depending on the electrical application inside your RV. With this transfer switch, you will need to wire each component individually. This could include an inverter, a converter charger, shore power (or an on-board generator), and an AC panel.
The plastic case also has cord knockouts for other connections.
Wiring Example
In this wiring example, the transfer switch selects between the inverter and shore power (or an on-board generator). The converter is also capable of charging the batteries while shore power is active. Lastly, the AC panel is powered by either the inverter or shore power, depending on which is currently providing power at the time.
TS-30 Go Power! Transfer Switch - 30 Amp - Plastic Enclosure
Item # 34264403
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not fit
Customer Reviews
Go Power Automatic Transfer Switch - Plastic Case - 30 Amp - 120V - 34264403
Average Customer Rating: 4.8 out of 5 stars (22 Customer Reviews)
This transfer switch automatically changes from inverter to shore power when you hook up at the campground. Protects your electrical system from AC power backfeed.by: Glenn 04/25/2024
Easy to install. Is working flawlessly. Could be great if transfer delay jumper was included for instant power transfer from shore to battery
by: Lee 03/13/2024
I used it for a generator that I wired into my RV.
It works good so far, a year later.
by: Craig12/19/2023
Good product, prompt delivery, the transfer switch works seamlessly transferring power from battery through the inverter when ac power is interrupted
by: Speedbrake04/25/2021
Added an inverter to my travel trailer. To keep the inverter from inadvertently powering the converter when no shore power/generator is hooked up, you’d better have a transfer switch. Or be 100% perfect, all the time. Since nobody’s perfect, I made the choice to install the transfer switch. This gives shore/generator power priority over inverter power. It won’t let both be in use at the same time. Had it a year now. Works as advertised. No problems with install or use. It comes with some Wago lever nuts to make wiring connections inside the box. These only hold two wires. I found it helpful to buy some that held 3 10awg wires. See pic.
by: Ed04/25/2024
It works as it should, no problems.
by: Henry B. 09/14/2019
I switched to Lithium batteries and a 2000W Inverter in my RV. I also rewired my Electrical system to be able to run all but the air conditioner off my Inverter. Part of the rewiring included adding this transfer switch to my system. It switches between Inverter or shore power/generator power. It is easy to wire up and works great. I highly recommend this for anyone needing to switch between different power sources. Great product. Well worth the money.
by: Ron 11/23/2021
I asked for advice regarding adding a auto transfer switch in my Fifthwheel and I receive very professional and personal help. The product arrived on time and in excellent condition. Following the agent's suggestions I had no problem installing this product.
I appreciate being able to call for support and be able to understand the person I'm talking with.
by: Keith 07/13/2023
Easy install and works great! Automatically switches between my inverter and shore power.
by: Kevin 04/28/2023
Great service from start to finish. Paul was super helpful and I was able to get the transfer switch in time for the weekend install! Thanks for all your help!
by: Richard 09/26/2023
Very easy to install.The quality of the box and wiring are very good as well.
by: Darrell 08/22/2023
It was like advertisement great product
by: Jonathan01/25/2022
I installed this Go Power Auto Transfer Switch in a 1999 Ford E350 ambulance camper conversion last year to switch between the 30 amp shore power and a 2000 watt inverter to power the electrical outlets for things like the microwave, laptop, CPAP, etc. Wiring it in was easy; you have a primary input which is what it will normally use first (the shore power), a secondary input (the inverter) which it uses if there is no primary power, and the output, which is wired into the breaker panel. It is 100% set-and-forget once you install it.
by: Brad 06/30/2023
Works perfectly
by: Joe 09/08/2021
I purchased this 30A transfer switch for a rebuild of my son's 1985 GMC Vantura campervan. It was easy to install and works great! I would highly recommend this transfer switch to anyone with the need that this device provides.
by: Robert12/01/2018
The product was easy to install and worked when I turned on the power. I installed it in my Toy Hauler along with an Inverter. I just installed it so time will tell but it seems to work well so far.
by: James 06/13/2023
by: Jordon09/17/2023
by: Christine 03/19/2023
by: William 03/14/2023
by: Doug 12/04/2021
by: John01/06/2022
22
22
See what our Experts say about this Go Power RV Transfer Switch
- Parts Needed To Add Solar Charging And Run Equipment Off Batteries On a RV Van MotorhomeIt sounds like you are looking for a system more like the Go Power Solar Elite Charging System # 34282184. This system does include solar panels along with a solar controller, 2,000 watt inverter and charger that will allow you to charge your on board batteries off of solar and be able to use the power from the batteries to run your 12 volt and 120 volt circuits. The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger # PD4060K you found only acts as a power center...
view full answer... - Can Go Power Automatic Transfer Switch be Used With Power Control CenterI reached out directly to the manufacturer, Go Power, about compatibility of the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp PD4135K and the Go Power Automatic Transfer Switch - Plastic Case - 30 Amp - 120V # 34264403. They sent me the diagram below that I added, and said the following: "The converter would need to be wired into the transfer switch instead of the distribution panel so it only comes on when shore power is applied."
view full answer...
- Economically Priced 30 Amp RV Transfer SwitchThe best value for a 30 amp transfer switch is the Go Power Automatic Switch part # 34264403 that you referenced.
view full answer... - Can The Go Power Automatic Transfer Switch 34264403 Be Used In a Residential Application? Yes, you can use the Go Power Automatic Transfer Switch # 34264403 in your residential application. You will need to ensure that the electrical being used for your furnace is no more than 30 amps and uses 120 volt power and not 240.
view full answer...
- Recommended Cargo Trailer Air Conditioner and AC Power WiringFor your AC power Setup and Air Conditioner additions, I recommend the Advent Air RV Air Conditioner w/ Ceiling Vent and Start Capacitor # ACM135C. This air conditioner will allow you to simply cut a 14-1/4 by 14-1/4 inch square hole (standard roof vent size) where you want to mount the unit. I've attached the installation instructions to help with placement and mounting. We do not carry the AC power outlets or panel with breakers, but we do carry the Go Power Transfer Switch - Quick...
view full answer...
- Recommended Power Transfer Switch for Three AC Power SourcesI do have an option for you but none of our power transfer switches will allow you to switch between three AC power sources. However, I do have a way for you to do this but you will need to install two power transfer switches like the Go Power Automatic Transfer Switch part # 34264403 for example. A transfer switch will have a single dominate side. So how the input is wired into the switch will affect how it passes power through, so two switches could be wired as you have suggested using...
view full answer...
- Can Go Power Transfer Switch Work With 2,000 Watt InverterYes, you can use the 30 amp Go Power Automatic Transfer Switch # 34264403 with your 2,000 watt inverter without any issue.
view full answer... - Is It Safe To Plug An RV Into Shore Power With An Automatic Transfer SwitchA transfer switch is installed to prevent power from being drawn from multiple sources (i.e. shore power, generator, inverter). The Go Power ATS # 34264403 you were looking at is for transferring back and forth from inverter and shore power. Transfer switches are wired so that one power source (typically shore power) will be dominate and when connected to it would automatically switch to it. If you were using an inverter to power your RV and then connected your shore power cord to the...
view full answer... - How are Generator, Shore Power, Converter, and Inverter Typically ConnectedYou'd need to use a transfer switch like the Go Power Automatic Transfer Switch part # 34264403 that you referenced for the output of the generator and the shore power to run to. From that you'd run to the converter charger which will convert the AC to DC to charge your battery and then you'd also run to the inverter to invert the DC power back to AC for any AC power. Your converter/charger may have an inverter section built into it or an out put that is AC without requiring the inverter.
view full answer... - What Type of Transfer Switch is Needed to Run Coffee Maker or Toaster that Draw 1,000 WattsBasically you'd need a little over 10 amps of power at any given point based on the wattage of the accessories you mentioned so the 30 amp transfer switch part # 34264403 would easily work really well since it has about 3 times the amperage requirement. This would be a really solid choice that would work well so I recommend it for you! We also don't have anything lower amperage either.
view full answer... - How Does Go Power Automatic Transfer Switch # 34270278 Connect to Shore Power and InverterThe Go Power Automatic Transfer Switch # 34270278 that you are interested in was designed to automatically switch power sources between an inverter or an AC power source. You'd want to run the inverter you have now to this as well as the power source wiring from shore power and this would automatically take care of your AC power needs/switching. Basically your battery would connect to the inverter, the inverter to the # 34270278 and then the # 34270278 to your fuse panel. This does not...
view full answer...
- Should The Go Power Transfer Switch Time Delay Be Turned Off You'll want to leave the Go Power Automatic Transfer Switch # 34264403 on the 20 second delay to ensure that your generator has enough time to warm up and stabilize its output before it is connected to the load side of your RV's electrical system. This will prevent any power surges that could damage the electronics inside of your RV.
view full answer...
- Can the Go Power Automatic Transfer Switch be Used on a BoatI spoke with Go Power to see if this can work for you. They have not dealt with the Automatic Transfer Switch, part # 34264403, being installed on boats. They said that as long as it's in a dry area, it should be fine. The inverter also needs a bonded neutral. I've linked to a video review of this switch for you to look at.
view full answer... - Recommended Power Transfer for Generator Connection on 5th Wheel TrailerThe Furrion Transfer Switch - 50 Amp # F50ATS can be added to your 5th wheel trailer along with the 50 amp power inlet like # A10-50INVP or # A10-50INBKVP. Most generator inverters will use a 30 amp generator cord, so you will use the Mighty Cord Generator Adapter for RV Power Cord - 50 Amp Female to 30 Amp Twist Lock Male # A10-G30450VP and then power cord # A10-5025ED. This cord is the shortest we carry at 25 feet long. This combination will allow you to power your refrigerator from...
view full answer... - Replacement 30 Amp Transfer Switch for Older RVThe Go Power Automatic Transfer Switch # 34264403 that you referenced is exactly what you'd need! This is a replacement for the transfer switch you have now that is designed for 30 amps and will work great. I attached a review video for more info for you to check out too.
view full answer... - Automatic Transfer Switch For 30 Amp ServiceYou can use the Go Power #34264403 Automatic Transfer Switch for 30 amp service. This transfer switch automatically changes from inverter to shore power when you hook up at the campground. It also protects your electrical system from AC power backfeed. I have attached a graphic showing a typical set up. I have also attached detailed wiring instructions for this unit as well.
view full answer...
- 30 Amp Transfer Switch Recommendation For TrailerDue to their reliability, I recommend a Go Power automatic transfer switch, and for a 30 amp switch the best option is the following: - Go Power Automatic Transfer Switch - Plastic Case - 30 Amp - 120V # 34264403
view full answer... - Recommended Parts To Add Solar, Battery, Generator, and Shore Power to Enclosed Cargo TrailerI'd be more than happy to help you out! You're going to need a complete setup like what you find on an RV for what you're needing to do. This is based off of a battery bank but the power will be provided by the various methods you mentioned. Here are the parts I recommend using and then you can find the explanations for them below: Control Center - # PD4135K Pure Sine Wave Inverter - # FIVBDP10A Transfer Switch - # 34264403 30 Amp RV Power Inlet - # A10-30INBKVP RV Power Cord Adapter...
view full answer... - 60 Amp Solar Panel Controller Needed for Lithium Battery BankI would be happy to help set up your battery system in your 2021 Thor WinSport. To start out with you're going to need to replace your 10 amp go power controller because it is to small to be used with your 1000 w inverter and your three 370 watt solar panels. A 10 amp controller can only handle 200 watts of solar power. I recommend using the Go Power MPPT Solar Charge Controller - LCD Digital Display - 60 Amp item # GP54FR. You have over a 1,000 watt solar array so you will need the 60...
view full answer... - Safely Using Generators and Inverters TogetherWhile we strongly recommend using an Go Power Automatic Transfer Switch like part # 34264403 to do this process the Bulldog Quick-Connect Set w/Dust Cover part # BDW20018 could be used. The recommendation is because if you or a friend using the camper forgot to disconnect the quick connects this woud lead to issues in the camper when plugged in. It is an easy and reliable way too prevent accidents.
view full answer... - Transfer Switch for Use in RV that Has Progressive Dynamics 45 Amp Power CenterAny time you have more than one AC power source you need to use a transfer switch like the # 34264403. This kit will automatically switch from the inverter power to shore power when available. But since you have a 45 amp power center and the transfer switch you referenced is only designed for 30 amps you'd want the 50 amp Furrion Transfer Switch part # F50ATS. I attached a picture that shows the connectors that this uses. You'd want to run 6 gauge wire stripped back into the pins and...
view full answer...
- Transfer Switch and Battery Charger Needed For 30 Amp Shore Power and 3000 Watt Inverter Yes, the Go Power Automatic Transfer Switch # 34264403 will work with your 30amp shore power cord and 3000w inverter. Your 3000w inverter will have a running watt rating of 3000 watts which is 25 amps on 120 volt power. The size charger you select will need to reflect the power needed on the 12 volt side for recharging batteries and operating your 12 volt supply. Generally I recommend getting the Go Power Industrial Pure Sine Wave Inverter Charger # 34275013 as this one device takes place...
view full answer... - What Size Wire Should Be Used With a 30 AMP Automatic Transfer Switch?You're going to want to use 10 AWG wire # 10-1-1 with your Go Power Automatic Transfer Switch - Plastic Case # 34264403. Since this is a 30 amp ATS 10 AWG will be plenty, but if you were to use a 50 amp switch you'd want to beef that wire up to 6 AWG.
view full answer... - Is Go Power Automatic Transfer Switch # 34264403 Current VersionWe have the current version of the Go Power Automatic Transfer Switch # 34264403 that you referenced. We don't have any older versions in stock so if you ordered this you would receive the current version.
view full answer...
Do you have a question about this RV Transfer Switch?
Info for this part was:
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Edited by:
Amanda M
Written by:
Halie H
Updated by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ron
11/24/2022
The transfer switch has been working great. Absolutely no problems. The help I receive from your support was great. Very simple to install.