High Altitude Jet for 3,200-Watt etrailer Generator - 6,000' to 8,000'

See what our Experts say about this etrailer Accessories and Parts

• High Altitude Jet Kit Recommendation for Use with etrailer.com Generators # 333-0002-2-0007
  Yes, we do have two high altitude jet kits for the etrailer.com generator set part # 333-0002-2-0007 that you referenced. If you will be between 6,000-8,000 feet you'd want the jet kit part # 333-330717003 or if you'll be between 3,000 to 6,000 feet you'll want the jet kit part # 333-330717002.
  view full answer...
• Will High Altitude Jet # FIR77FR Fit the 171cc Firman W02981?
  There are some solutions for your problem, but the High Altitude Jet # FIR77FR is for dual-fuel generators only. I contacted Firman, and they recommended # 333-330717003 for use with your W02981 generator. This is listed for use at 6,000' - 8,000', but this is not a hard cutoff. Since you're only 400' higher, you shouldn't have any issues, but Firman recommends you periodically check the spark plug and spark arrestor to make sure there is not excess carbon build up. Check out the video...
  view full answer...
• Using Generators to Power RV At High Altitudes
  When you get to higher elevations (typically right in the range where you recently camped - 6,000 to 8,000 feet above sea level) generators do have a tougher time running efficiently due to a few factors but mainly because the lower oxygen density requires more airflow for the mix of air and fuel. Many generators are indeed compatible with separate "high altitude" kits that allow them to run to the best of their ability in this environment. We don't currently carry Yamaha generators so...
  view full answer...
• High Altitude Jet Recommendation for etrailer.com Generators
  The high altitude jets need to be only used when you are at a higher altitude. Once you come back to a lower altitude you'd need to go back to the standard jets. Instructions are included. We do carry the jets on our site now as part # 333-330717003. The cost is below at the attached link. Carbureted engines can run really well when jetted properly, but the downside is that they have be re-jetted if there's a drastic elevation change. So if you are at a high elevation the stock jets will...
  view full answer...
• High Altitude Kit for 6,000 feet for etrailer Generator # 333-0003
  The number on the jets of the high altitude jet kits like the part # 333-330717003 for the etrailer generator # 333-0003 represents the amount of air that passes through it. This is the correct kit for your altitude of 6,035 feet.
  view full answer...
• Does Generator That Can Run On Gas and Propane Require High Altitude Jets with Propane Source
  I checked with Firman and they indicated that when you are using a generator with propane as a fuel source you don't typically end up needing to use the high altitude jet kits. They said to go ahead and try it without and that you'd most likely find that you are totally fine with out. If you hear popping that would indicate it's running too lean which is what the high altitude jets would compensate for.
  view full answer...
• Using etrailer.com 3,200-Watt Generator at 9,000+ Foot Elevation
  For your etrailer.com 3,200-Watt Inverter Generator # 333-0003 we do have the High Altitude Jet # 333-330717003, which is designed to allow efficient generator performance at higher elevations. This is the highest elevation kit available for this particular generator. When using any generator at high altitudes the potential issue comes as a result of the lower air density. This causes reduced engine power because the air mass and air-fuel ratio decreases. The high altitude jet offsets...
  view full answer...

Do you have a question about this Accessories and Part?