bing tracking image
  1. RV Interior Lights
  2. Patrick Distribution
  3. Dome Light
  4. LED Light
  5. Surface Mount
  6. Switch
12V LED RV Dome Light - Single - 7-1/4" Long x 4-1/4" Wide - White

12V LED RV Dome Light - Single - 7-1/4" Long x 4-1/4" Wide - White

Item # 277-000113
Our Price: $14.69
RV Interior Lights
Shipping Weight: 0.25 lbs
Add to cart
In Stock
Patrick Distribution LED Light RV Interior Lights - 277-000113
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Use integrated switch or wire to a light switch to turn the single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents. Great Prices for the best rv interior lights from Patrick Distribution. 12V LED RV Dome Light - Single - 7-1/4" Long x 4-1/4" Wide - White part number 277-000113 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (54)
  • Q & A (0)
  • Videos (2)
  • Photos

Patrick Distribution RV Interior Lights - 277-000113

  • Dome Light
  • LED Light
  • Surface Mount
  • Switch
  • 12V
  • 7L x 4-1/4W Inch
  • White
  • Warm White
  • Patrick Distribution

Use integrated switch or wire to a light switch to turn the single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.


Features:

  • Single dome light is perfect underneath a kitchen cabinet or in a walkway in your RV
  • Energy-efficient, warm yellow LEDs last longer and burn brighter than incandescent bulbs
  • Integrated switch lets you turn the light on and off
    • Can also be wired to an interior light switch
  • Clear acrylic lens won't shatter if accidentally dropped like glass lenses would
    • Textured pattern helps disperse bright light throughout your RV
  • Durable, white plastic construction
  • Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included
    • 2-Wire design - white for ground and black for power


Specs:

  • Overall dimensions: 7-1/4" long x 4-1/4" wide x 1" tall
  • Overall mounting hole spacing (center to center): 4-1/8" long x 3" wide
  • Voltage: 12V DC
  • Light output: 135 lumens
  • Number of LEDs: 3
  • 1-Year warranty


Need extra light over your camper kitchen sink for when you do the dishes? Or perhaps you need to upgrade the dim, old lights in your horse trailer? This dome light has warm yellow LEDs that give you brighter light underneath a kitchen cabinet, in a walkway, by a workbench, or inside your enclosed trailer.


LEDs are more energy efficient, last longer, and burn brighter than lights with incandescent bulbs. You won't have to worry about replacing bulbs that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery or overload your circuits.


Surface-Mount, Bolt-On Installation is Easy


Installing Patrick Distribution Dome Light

This surface-mount dome light is incredibly easy to install either as an upgrade or a direct replacement of your existing light. To access the bolt holes, slide the lens off the housing. Then, using hardware (not included), bolt the housing onto the ceiling, wall, or cabinet before sliding the lens back on. The light has a 2-wire design that hooks up to ground (white wire) and power (black wire). Once you're finished, you can then turn the light on and off using the integrated switch on the base.



C2-205E1CLWW-WN-8W Patrick Distribution 12 Volt LED RV Pancake Light - Surface Mount - 3 LEDs - White

Alternate part number: 94566





Video of 12V LED RV Dome Light - Single - 7-1/4" Long x 4-1/4" Wide - White

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Patrick Distribution RV Lighting - Ceiling Light - 277-000113 Review

Today we're gonna be taking a look at the Three LED Surface Mount Dome Style Light Fixture. This light fixture would be perfect for your RV or enclosed trailer. The unit's gonna feature a white plastic base with a durable clear acrylic lens. The lens has a nice pattern to it so it helps disburse light output very evenly. The unit is designed for a 12 volt system. It's gonna feature three bright LED's.

LED's are great replacements for incandescent lights. They last longer, they burn brighter and they're much more efficient. You don't have to worry about replacing bulbs or worry about brittle filaments. And the LED's have a much faster response time. The light has an easily accessible on and off switch. There's gonna be a total of three mount holes on the unit: one, two and three.

Mounting hardware is not included. To gain access to the mount holes all you need to do is slide the lens until it disengages and then you can simply lift it off of the housing and remove it. So here are your three mount holes. A few measurements we'll go right through real quick. The mount holes go in this direction, area separated on center by three inches.

And then from the top one from one of the lower ones, those are going to be separated on center, about 4 1/8 inches. And each hole's gonna have a diameter of 3/16th's of an inch. The overall length of this light, measuring from edge to edge, that's gonna give us a measurement of about 7 1/4 inches, going side to side, we're looking at about 4 1/4 inches and then the thickness of this light from top to bottom is only about one inch thick. The light does feature a two wire design, black for power, white for ground. We're gonna go ahead and hook it up to our power source, that way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead light so you can see it on our lower light setting. So you can see here that the light sends out a very bright consistent signal and you can see how that lens really helps spread out the light output rate evenly.

Again it has the on and off switch for easy control and it has a very fast response time. The unit has three LED's so that multi-dial design really helps optimize the light output. That's gonna do it for today's look at the Three LED Surface Mount Dome Style Light Fixture.


Customer Reviews

12V LED RV Dome Light - Single - 7-1/4" Long x 4-1/4" Wide - White - 277-000113

Average Customer Rating:  4.6 out of 5 stars   (54 Customer Reviews)

Use integrated switch or wire to a light switch to turn the single dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.

by:

I installed five of these in our cargo trailer / camper conversion about one year ago. They are bright and decently built. A good bang for the buck.



by:

This light is a good product, easy to install and warm white as i desired. I find that it works best under a counter where its not in direct view of sight since the clear lens can make it bright for some.



by:

I have before and after photos. What a difference the new lights make. The LED lights are brighter and don’t get so hot that it melts the plastic like the old ones.

Angie

7/29/2021

Working great, I need to order a few more soon.



by:

Nice white light. I purchased single and double lights.



by:

I purchased 3 of these lights to put in areas of my 5th wheel that were lacking illumination. 2 of them went in the front storage compartment to illuminate my battery box and tools storage. The other was installed at one end of the basement area (the other end had a factory installed light).

They work GREAT and were priced right from etrailer.



by:

Work great. Look good. First LED I purchased so I wasn't very familiar with the lumens. These are bright and would be great for a kitchen or bathroom or even an offgrid home. I wasn't looking for something this bright for my cab bunk but was able to tone it down by spray painting the lens white.



by:

George,

I ended up at etrailer
after a fairly exhaustive search for all of the hard parts contained in my order. I found Timken bearings, but not all of them. I found SKF seals but they were 4 days out plus for delivery. The cost of USA made name brand bearings wasn't the issue for me, it was availability.

As you may know, the axle that takes those 3" OD inner bearings with such a small 1 1/2 spindle is an old, possibly very old Ag or boat trailer axle. They are meant for high load, but slow speed use. In comparison, the bearings you sent while appearing to be of good quality to the naked eye are also much smaller rollers indicating a higher speed bearing but of less maximum load capacity. None of this really matters when you have such a hard time finding the parts needed to complete the job in question. I simply state this for your information, but certainly, you were already aware if the differences in sizing and load capacity. It's doubtful that the trailer in question will EVER see enough load to make any difference in performance whatsoever, so please don't take my statement as a complaint.

As for the seals, they are the correct dimensions, and I did find your website helpful in double checking my cross reference work between brands. I'm also sure they will work just fine, but they do lack an innerspring to hold the tension of the inner lip seal against the spindle's seal area. Again, they will do the job, at least at first but I'd guess they won't last nearly as long and aren't a double lip seal design as the SKF, and National brands were. I'm not complaining one bit here, I promise. The cost factor differences were dramatic to say the least. The 2 inner bearings and 2 inner races made by Timken were equal to ALL 4 bearings and races, plus the seals from you guys.

Look, I realize that stocking such expensive and nearly obsolete parts made in the USA isn't a business model for anyone who wants to stay in business very long selling something that can be found down the street at nearly the same price. I understood what I was ordering before I ever started putting things into the cart on your website.

As a heavy equipment mechanic of 30 years experience, I promise your parts will get the best of treatment and a proper start to their life, hopefully, a long use life without issues. The bearings will be sonic cleaned before they are every packed with the best of grease choices. All the races and the seals will be installed with the proper driver to make sure they are square and seated correctly into the hub bore.

I assume if you use this review of mine for your website that you will not edit it in any way. What people using your site and customer service need to understand is that while I might see the differences I do not think I purchased ANY sub-par parts. Other customers need to also know that "In Stock" with you guys means "In Stock" and after hours of phone calls looking for those particular parts it was a very welcome thing to read on a website and even better when the order shipped On Time, Complete, and at what I consider to be a very reasonable cost. They would also need to know that your website is just chocked full of easy to find information. My example besides the seal cross reference information is the wiring diagrams. The color differences between RV trailers and Utility trailers makes you double check things to make sure you got it right and ALL that info is readily available on your site. Much easier to access than other companies.

In closing to what certainly is an overly detailed reply to your request for feedback, I'd just like to thank you, George. Thank you and your company for doing the EXACT thing you said you would and thank you for taking away a fair amount of frustration searching for parts. I will certainly use your company again and again if for nothing else, it's ease of use and promptness of service.

If you'd seriously like pictures I will be happy to try and supply them at a later date. For now, this old trailer has to get back to earning its way.

Mike

5/8/2019

The lights are mounted in a toolbox under the lids and they work well.



by:

I have an older boat and I replaced the interior lights. They work great and the battery consumption will be a lot less and they are brighter,

John

5/21/2019

Still working great



by:

Replaced my original lights with these, running off of a separate battery in the trailer rather than vehicle power. Provide ample light for my needs.

Marshall M.

1/15/2019

Great, provides light for times when trailer is not connected to AC power.



by:

We installed these and another type of LED’s we bought from etrailer to replace the existing OEM lights on our travel trailer. Both types installed easily and lined up perfectly with the existing holes. Lights are bright without all the heat that the original lights gave off and are well worth the money.



by:

I got this light because the utility trailer I purchased had none. The description was accurate. It was easy to hook up to my running lights on the trailer. It provides a good amount of light to see inside the trailer at night. I would recommend this item.



by:

The product seems to be ok but the packaging was awful. I bought 12 double lights and 2 single. All of the lights had no covering and were thrown into the shipping box without any concern for transport damage. Thankfully there was no damage but it was obvious that the person who packed this box was not taking any pride in their job. I had to further transport the lights to a distant location and using the wadded up packing paper I was able to layer the lights using the shipping paper to separate the layers and support the lights so they would not be damaged.There was a right way to do it and it only took a little bit of time to reduce the chance that the light could be damaged. Keep in mind that I am doing everything I can to avoid [online vendor]. This kind of service is not helping



by:

As described, perfect for wardrobe closet lighting and shaving lights in our fifth wheel. Super price and fast service from etrailer....Will buy from them again.



by:

I have two of these installed in a 7' x 12' enclosed trailer. They light up the whole place.



by:

Love the lights, super bright! Put 5 in a 20 footer.



by:

Very happy with lights , no issues , big difference after swapping regular 1156 bulb fixture, thanks again



by:

No screws, no electrical connectors. The lights and sensors are nice products and function well



by:

These lights are fantastic! Replaced all my incondescent ones and it's like a new trailer. The only thing better than this product is the great service etrailer provides.



by:

Very happy with the led lights I ordered actually they were better than I thought they would be, I definitely would order more if the occasion arises



by:

The light works great! We got it for under the bathroom sink in our RV and now we can see everything in there.



by:

My only comment was that the items I ordered did not come with any mounting screws.



by:

good light output but the lens casts a pattern that I am not crazy about. I would give it 5 stars if it didn't.



by:

Good replacement light. Much brighter than stock bulbs and more economical to use



by:

Product works as expected. As always etrailer came through spotless



by:

High quality dome light. Fast shipping and order processing.


25
54
Show More Reviews

See what our Experts say about this Patrick Distribution RV Interior Lights

Do you have a question about this RV Interior Light?


Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Hayden R
Installed by:
Hayden R
Employee Mary K
Written by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924