Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
(55 reviews)
Price: $190.61
In Stock
Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
Item # 154-792-118158
Our Price: $190.61
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
Roadmaster Tow Bar Wiring - 154-792-118158
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with vehicles that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.
Features:
- Connects your RV's tail, brake and turn signal lights to your towed vehicle's lighting system
- Designed for use on towed vehicles that have a 3-wire system (separate brake and turn signals)
- Prevents electrical feedback and the damage it can cause to your towed car's electrical components
- Includes tail light converter to adapt your RV's 2-wire system (combined brake and turn signals) to work with the towed car's 3-wire system
- Contains everything you need to wire your car for flat towing
- 6 Hy-Power diodes
- Tail light converter
- 30' Long strand of 4-wire electrical cord
- 6' Long cord with 4-way flat connectors - both vehicle and RV ends
- Ring terminal and wire connectors
- 3' Long split-wire loom
- Limited Lifetime Warranty
Specs:
- Max amperage: 85 amps
- Max voltage: 24 V
Note: If your RV has separate brake and turn signal lights, you do not need to install the included tail light converter. However, you will need to replace the 4-way vehicle-side connector with one that is capable of carrying the separate signals.
The diagram below shows the installation of the 6-diode tail light wiring kit on a towed vehicle (or dinghy) that has separate turn signals (typically amber) and red brake lights. This kit will most often be used with a motor home that operates off of a 2-wire system wherein the brake lights do the flashing for the turn signals. The included tail light converter (118158) is used to convert the combined brake and turn signal lights to separate ones to match those of your towed vehicle.
154 and 792 Roadmaster Universal Wiring Kit with 6 Hy-Power Diodes and 118158 Tow Ready Tail Light Converter
Installation Details
This Product Fits The Following Vehicles
- 1995 - 1997 Nissan 200SX
- 2000 - 2001 BMW 3 Series
- 1999 - 2004 Chrysler 300M
- 2013 - 2018 Nissan 370z
- 1984 - 2005 Toyota 4Runner
- 2012 - 2019 Fiat 500
- 2014 - 2015 Fiat 500L
- 1999 - 2022 Hyundai Accent
- 1984 - 2020 Honda Accord
- 2002 - 2007 Suzuki Aerio
- 1986 - 1997 Ford Aerostar
- 1999 - 2004 Oldsmobile Alero
- 2002 - 2012 Nissan Altima
- 1989 - 2000 Isuzu Amigo
- 2003 - 2008 Isuzu Ascender
- 1985 - 2005 Chevrolet Astro
- 2007 - 2009 Saturn Aura
- 2001 - 2003 Oldsmobile Aurora
- 1998 - 2007 Toyota Avalon
- 1998 - 2000 Dodge Avenger
- 2004 - 2009 Chevrolet Aveo
- 2007 - 2011 Chevrolet Aveo5
- 2001 - 2005 Pontiac Aztek
- 2003 - 2006 Subaru Baja
- 2012 - 2016 Volkswagen Beetle
- 1993 - 1996 Chevrolet Beretta
- 1973 - 2005 Chevrolet Blazer
- 1983 - 1994 Chevrolet Blazer Full Size
- 1999 - 2005 Pontiac Bonneville
- 1985 - 1987 Subaru Brat Pickup See All Vehicle Fits
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Did not fit
Customer Reviews
Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting - 154-792-118158
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with vehicles that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.by: Chris B03/25/2015
Subaru Outback Wagon
In ordering the parts I got a little confused as to exactly which kit I needed. My motorhome has combined brake/turn signal lights & the car ('03 Subaru Outback) has separate brake/turn/parking lights. Thought I needed the 6 diode kit (which I ordered) until I had all the parts here & read through the instructions for the umpteenth time (BEFORE cutting anything) & then realized what they were doing. Turns out all I needed was the 4 diode kit. Sounds like there won't be any problems returning the unneeded parts since they were never installed. Great service there!
Took a lot apart in the back of the car because of the lack of space behind the tail light assemblies, but it all comes apart pretty easily. Also allowed me to route the wiring along side the stock harness. Have a bunch of 1/2" split loom here & used it.
Thought I would have lots of wire left over, but I actually had to splice 2 cut offs to make a jumper long enough to get from 1 side of the car to the other. Glad the car wasn't any longer & I didn't have to make up 2 jumpers as with some of the kits!
Hardest part was finding a hole in the firewall & getting the harness routed under the dash so as to not tangle with the pedals, etc. I just don't flex like I used to.
Everything works fine although it was NOT a "5 minute job".
by: Rich L.03/05/2013
Chevrolet Volt
The diodes and wiring are good and worked well. But the 118158 converter produced a 3.5 volt drop such that the brake lights were as dim as the tail lights. And when a turn signal was triggered the brake lights dimmed even further. I ended up stringing a separate brake wire through the car and re-wiring my truck with a 5-wire connector.
by: Jerry B.08/04/2013
2013 Honda CR-V
Prompt deliver of product. We haven't gotten this part of our project installed, we are still watching YouTube videos and other info on procedure. Had very little difficulties installing base plate on our 2013 CRV this should go well also. Our lights are a little more complicated but once we figure out how to actually wire to them every thing we've learned so far is very straight forward.
by: Christopher03/14/2018
2012 Ford Five Hundred
I used this wiring kit on a 2012 Fiat 500 Sport. All of the components worked as advertised and I am really pleased with the result. I used the 6 diode kit so the FIAT's turn signals would work the same when it's being towed as when it is driven.
This was my first light wiring kit installation and it was quite a challenge on the small FIAT to fish the flat cable from the rear of the car to the front. I ran it along the drivers side - over the rear wheel well, along the rocker panel, and up over the front wheel well. The wheel wells were the most difficult part of the job. Running the cable from driver's side to passenger side along the rear bumper and running it from the front wheel well to the front of the car and installing a connector were straightforward.
One problem I ran into is the female disconnect terminals supplied with the kit that are used to connect wires to the diodes anticipated a thicker wire (16-14 AWG) than what the FIAT uses. A quick trip to a close by big box store was all that was needed to find the same connectors for a thinner gauge wire (22-18 AWG). You still use the supplied disconnect terminals with the flat cable connections to the diodes.
by: John J06/12/2016
Honda
I bought this wiring kit because I wanted to wire my 2013 Honda CRV myself. E-Trailer has a video that is helpful in its installation . What I later found out was you need to route the wires through some covers underneath the vehicle and unless you have some means to raise the vehicle pretty high that routing will be difficult. I went to the Honda dealer and several other auto places and no one would install this kit for me because of liability reasons so now I have a product of question. I ended up at a friends garage who had a lift and we routed the wire from side to side and from front to back in about 20 minutes. Once secured in place I took the car home to finish the diode installation. Using the video it was easy to install. The only problem I had was putting the rear tai lights back in. You will need the separate the diodes as the space between the body and light housing is very close. Other than that everything worked out well.
by: Dale H06/26/2020
2013 Honda Fit
An ingenious system that enables a combined break and turn signal set up on your RV to properly operate the separate turn signal / brake setup of your toad. Beautiful!
Dale H.
6/28/2021
Have been using the brake and turn signal system for over a year now, and it is still working flawlessly!!
by: Jerry07/29/2021
Ford Ranger
Install on a 2020 Ford Ranger. The product was excellent. The only problem I had was trying to remove the nuts holding the front bumper on. Ford has these bolts embedded in a hard plastic frame that spaces the three bolts on each side. In trying to remove the nuts I got them started then they would neither come on off nor reinstall. The nuts were spinning the bolts. After thinking about the fix I was in I decided to cut the factory bolts off and replace them with 1/2" x 1 1/2" bolts with fender washers. I tried a sawsall with a metal cutting blade and the bolts ate the teeth right off. I put on a Milwaukee thick metal cutting carbide tooth blade and that did the trick. Other than that, which is Ford's fault, everything went as the etrailer videos showed. If you are doing this make sure to spray the exposed bolt threads with WD-40 or something like before you try to remove the nuts.
by: Jean C07/24/2019
Honda Civic
The Roadmaster Wiring Harness was installed easily by our mechanic and works perfectly with our Civic and RV. I'm certain we will use etrailer.com for our new dinghy towing requirements!
by: Bill02/05/2018
Toyota Tacoma
I used the wiring harness on my Tacoma pickup in preparing to tow it behind our 40’ motorhome. The harness went on easily from the front grill to the rear lights, where I soldered and heat wrapped each connection. The instructions were ample and easy to follow.
It’s been a year since the installation, and the wiring has worked flawlessly!
by: Rich B.06/02/2012
2012 Kia Sportage
This harness was an excellent choice. It took about an hour and fifteen minutes to install. Everything is spelled out for you in the instructions and if all else fails, watch the online video. The hardest thing was removing the tail light on the Sportage. I has a ball joint connection that forces you to pull harder than you think you should. I was afraid I would break the light. But it popped out and the rest was easy. Very complete and works great! The connections fit like factory. Very Pleased.
by: Danny07/05/2014
2013 Chevrolet Sonic
I found the product to be of very high guality. I did not supply pictures as I would need to remove my taillights again. I had to covert a motor home that did not have separate turn signals to a Sonic that did. The materials supplied allowed me to just that. I do have two other comments-The instructions showed the wires on the car on the passenger side which is opposite from the Sonic and most others I would think. I had to reverse my thinking to do the correct procedure. Also, could you not supply unit specific instructions if the towing vehicle lighting arrangement and the towed vehicle was identified. This would eliminate the extra parts that I did not need and help the customer complete the task. Other than that, very good product. I guess it is better to have extra parts ratter than not having enough but I just thought this might cut the cost for some applications.
by: ALEX A11/08/2016
The wiring works great, I got more in the KIT than I could possible use and I am sure I had to pay for the extras, but I got what I needed and am very happy.
Alex A.
11/8/2017
it is doing great
by: only1jerry11/05/2016
2005 Subaru Forester
I did a lot of research before buying. etrailer's prices and support are above average. I ordered the Roadmaster 913-1 baseplate, Falcon-2 towbar and 154 universal lighting kit. I was completely surprised by the fast shipping, all parts arrived 3 days before I expected AND the shipping was free!
Before I ordered I talked with etrailer support to ensure I ordered the correct parts. They were knowledgeable and helpful.
by: Dale05/06/2016
This is my second purchase of wiring kit for towed vehicle I have bought from Etrailer. I had some questions and Etrailer was able to answer every question I had. I will go back to Etrailer next time I need products such as this.
by: David10/28/2017
2010 Suzuki Grand Vitara
A great product. Installed easily. Previous wiring experience would be good for somebody wanting to use this.
It has performed flawlessly over the past year. I’d recommend it.
David
10/28/2018
Fantastic. No problems at all. Works as required every time I plug in.
by: John D07/29/2021
Was skeptical about using with led tail lights,but it all went well. The installation videos are spot on. After one year and about 12k miles traveled, no problems. My vehicle is a 2020 Ford Ranger.
by: Ron B05/23/2017
2015 Fiat 500
The kit contained all you need to wire lights on a Fiat. The instructions were clear and concise. Excellent product and service as usual for etrailer.
Ron B.
5/25/2018
After one year this kit is still doing its job flawlessly.
by: James04/17/2021
Works as advertised. Design of these wiring kits is based on converting the common 3 bulb brake/turn signal systems to a 2 bulb system. This makes them unnecessarily complicated.
by: Dave G.07/28/2015
2008 Honda Fit
Very complete, hi quality, reasonably priced kit for lighting my "toad". If you have combined lights on your RV and separate lights (brake and turn) on your "toad", this is the kit.
by: Wayne06/06/2015
Product arrived on time.Online videos very well done.Katie D. provided excellent customer service on all the parts ordered.
Wayne S.
6/11/2016
very happy with product still working without any problems
by: Dale P03/20/2019
Ford
I ordered a towbar and accessories through the Internet site. It was very easy and also very informative. The supplies were ordered and I receive them in a couple of days. It was a great price and I did much research before I ordered. We are planning to install the towbar on our Ford C-Max and tow it with our phoenix cruiser 3100.
by: Mike03/29/2017
Nice set up. Instructions were spot on. The hardest part of the installation was removing car interior panels to get to the wiring. Would definitely recommend this product.
by: Greg R.12/18/2016
Customer service was the best. Product delivered as expected. I recommend this wiring package. My towing safety comes first and Etrailer delivered.
by: Dan F07/16/2016
2010 Kia Soul
Pretty darn quick on the shipping. Easy instructions, 2010 KIA Soul easy install, lots of spare space for the diodes and splitter box. Had all the wiring installed, tested in just under 2 hours.
by: Kevin 04/27/2021
Contained everything I required except the independent stop light switch.
25
54
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Parts Needed to Flat Tow a 2017 Mini Cooper 2-Door S Model Behind an RVIn addition to the base plates # RM-521882-5 for you 2017 Mini Cooper 2-door S model you will need a compatible tow bar, safety cables, lighting, and supplemental braking. For a tow bar I recommend the Falcon 2 # RM-520. It is the most popular compatible tow bar and I have linked a video review of it for you. For safety cables use # RM-643. The coiled design helps keep the cables off of the ground. For lighting the recommended kit for your Cooper is the 6-diode kit # 154-792-118158 and...
view full answer... - Parts Needed to Flat Tow a 2004 Jeep Grand Cherokee Behind a 2007 GMC Sierra 2500In order to flat tow a vehicle, the very first thing you are going to want to do is consult the owners manual in the recreational towing section to determine the correct towing procedure. If you find that the vehicle can be flat towed then you will need 5 items. First you will need base plates on the vehicle being towed or the Toad. The base plates provide the proper safe and secure attachment point for the tow bar. You can use base plates # 1425-1. I have included a link to a video showing...
view full answer... - Base Plates Compatible with Roadmaster Eagle Tow Bar for 2012 Ford ExplorerThe correct base plates for your Explorer will depend on how the vehicle is equipped. The Roadmaster # 4427-1A will work for you if your Explorer does NOT have the EcoBoost motor. If you have the EcoBoost motor, you would need to go with a Blue Ox base plate, part # BX2632 and the Blue Ox base plate to Roadmaster tow bar adapter, part # BX88151. The website we use to confirm the towability of a given vehicle does not have any information about the 2012 Explorer model. They state that...
view full answer... - Installation of Roadmaster 6-Diode Universal Tow Bar Wiring Kit on 2005 Jeep LibertySince there is not much in the way of available space behind the tail light assemblies of your Liberty, you should have room for the diodes in the cavity below the tail light assemblies. There is not much room between the bumper cover and the vehicle body, but there should be enough room to push the diodes down into that cavity. If you look at the photo I edited for you, you will be able to see the area I am talking about. If you should find that there is NOT enough room to fit the diodes...
view full answer...
- Brake Controller and Trailer Wiring And Parts Needed to Flat Tow a 2013 Toyota TacomaIf you are talking about towing a trailer with your Tacoma then you will start with trailer wiring to activate the trailer lights. It sounds like your Tacoma did not come with any sort of trailer wiring so to start you will need to install a 4-Way wiring harness, # 118496. Then you will need to install a 4- and 7-Way installation kit # ETBC7 to add a 7-Way and the wiring for a brake controller. I have included some links that will help with the ETBC7 installation. Then you would need a...
view full answer... - Parts Needed to Flat Tow a 2001 Chevy Tracker Behind a Motor HomeI found a copy of the owners manual online for the 2001 Chevy Tracker and found that you can flat tow it (see section 4-44 in the owners manual). There are specific procedures outlined in the manual that you will need to follow. There are at least 5 items you will need to flat tow the Tracker. First you will need base plates like # 1012-1. The base plates provide a safe and secure attachment point for the tow bar, which is the next item you will need. For a compatible tow bar I recommend...
view full answer... - Troubleshoot Vehicle Taillights Not Working with Tow Bar Diode Kit Installed When Plugged into RVWhen you plug the tow bar wiring # 154-792-118158 into your tow vehicle the diodes of the kit will prevent the Jeep from having control of them if the signal from the tow vehicle is being applied. This is a function of the diodes designed to prevent the circuit from backfeeding onto the vehicle's wiring circuits. If they are not working at all with the tow vehicle plugged in you will want to first verify that all the connections you made are secure. After that use a circuit tester to test...
view full answer...
- Tow Bar Lighting Recommendation for a 2007 Honda AccordI wish we had tow bar wiring that was plug and play for your 2007 Honda Accord, but the best option I can make for your vehicle that won't require any splicing would be a magnetic kit like the part # C6304, or your other option would be a diode kit that would require quite a bit of splicing like the part # 154-792-118158. I attached a couple help articles on tow bar lighting for you to check out as well.
view full answer... - Tow Bar Lighting Solution for 2019 Ford Ranger that Doesn't Require Brake Light RelaySince your 2019 Ford Ranger has a separate turn signal from brake light signal the diode kit that would work the best is a tow bar lighting kit for separate turn signals like you mentioned like the Roadmaster part # 154-792-118158. This will allow your brake lights and turn signals to function properly without requiring you to also use a brake light relay.
view full answer... - Flat Towing Setup Recommendation for a 2013 Honda CR-VFirst let's start with a base plate kit for your 2013 Honda CR-V. For that you would want the Blue Ox Base Plate kit part # BX2258. The most popular tow bar we offer that would work great with this base plate kit is the Blue Ox Alpha part # BX7380. This tow bar has telescoping arms that will make connection and disconnection possible on unlevel terrain. These are much easier to use than the fixed arms tow bars. This comes with safety cables as well. For lighting you can use the diode...
view full answer... - Turn and Brake Lights Do Not Work Using 6-Diode Kit and Converter for Towing a 2012 Cadillac SRXIt sounds like you have a good grasp on the installation of the Roadmaster 6-Diode Universal Wiring Kit, # 154-792-118158, and you have already gone through a few troubleshooting steps, so I would recommend troubleshooting the converter box from the # 118158 wiring harness. Installing the # 118158 wiring harness at the front of your 2012 Cadillac SRX instead of closer to the taillights is not a problem. To troubleshoot the converter box of this wiring harness, I would first recommend...
view full answer... - Using a Roadmaster Falcon 5250 Tow Bar to Flat Tow a 2010 Honda CR-VBefore you tow the vehicle you will want to consult the owners manual for information on towing the vehicle. For the 2010 Honda CR-V, you will need to use Roadmaster base plates, # RM-521559-4, that you referenced. Base plates are vehicle specific so the # 199-5 base plates will not fit the 2010 Honda CR-V. You can use the Roadmaster Falcon 5250 tow bar with base plates # RM-521559-4. You can also use the Brake Buddy. In addition to the base plates, braking system, safety cables, and tow...
view full answer... - Diode Wiring Solutions for a Flat Towing a 1991 Suzuki SamaraiFrom the research I did it looks like you have a separate tail light circuit. Which means your turn signals and brake lights are carried on separate circuits. The easiest way to install diodes on your setup would be to use 4 diodes and have it so that the tail lights of your 1991 Suzuki Samarai will operate as a combined circuit, so basically your current brake lights will perform the turn signal and brake light functions. Check out the picture I attached that shows how the 4 diodes of...
view full answer...
- Parts Needed to Flat Tow a 2011 Mini Cooper Behind a Motor HomeThe Blue Ox base plates # BX1307 are indeed a fit for your 2011 Mini Cooper. In addition to the base plates you will also need a compatible tow bar, safety cables, lighting, and supplemental braking, which you have mentioned. I have linked the installation instructions for you. For a compatible tow bar the most popular option is the Alpha, # BX7380. This tow bar also includes safety cables so you would not need to get additional cables if you choose this tow bar. For lighting, if you...
view full answer... - Tow Bar Wiring Kit for 2004 Chevrolet Malibu Classic Your 2004 Chevrolet Malibu Classic can indeed use the universal tow bar wiring/diode kit you referenced, Roadmaster part # 154-792-118158. This kit will require cutting and splicing of your vehicle wiring. An alternative is the Roadmaster Tail Light Wiring Kit with Bulbs # RM-155. This is a completely independent wiring kit that does not splice into or affect your vehicle's wiring. Its installation requires you to drill holes in each tail light housing to enable installation of the included...
view full answer... - Diode Tow Bar Wiring for a 2015 Toyota RAV4In that answer there are 2 wiring kits mentioned: diode kit # RM-154 and magnetic light kit # RM-2120. If you want to use a diode kit AND still have the turn signals function separately from the brake lights you will actually need 6 diode kit # 154-792-118158. I am assuming that the tow dolly also has lights so you would need to splice in the diode kit's 4-Way to the tow dolly's wiring harness. But you also have to make sure that the combined draw of all the lights does not exceed the...
view full answer... - Parts Needed to Flat Tow a 2009 Jeep Liberty with a 1999 Lazy Daze 26 ft Motorhome V10Yes, there are parts available that will allow you to flat tow your 2009 Jeep Liberty. The first thing to check is the vehicle owners manual for specific information on flat towing the Liberty. The first thing you are going to need are base plates. The base plates, # BX1976, will provide the proper and safe attachment point on your Liberty for the tow bar. For a compatible tow bar I recommend the Alpha, # BX7365. It comes with safety cables and it is rated for 6,500 pounds. If you are...
view full answer... - Recommended Flat Tow Setup for Blue Ox Tow Bar on 2008 Honda CR-VFor your 2008 Honda CR-V, you will want to start with the Blue Ox Base Plate Kit - Removable Arms # BX2246 which will be directly compatible with your tow bar. The tow bar you are describing is likely the old alpha or avail model, either of which will work just fine. If you want to determine which model you have, you can find it printed on the driver's side leg under the latch handle according to my contact at Blue Ox. If you don't have the safety chains, you will also want # BX88196....
view full answer...
- Tow Bar Wiring Causes Lights Not to Work on 1992 Elite Motorhome and 1997 Jeep Grand CherokeeYou are just going to need the proper wiring kit. It sounds like there are a combination of problems that are leading to the failures. There could be short and ground issues causing the lights not to work and the converter to blow. First, lets look at what is going on with the motor home. If it has a trailer connector on it you will want to test it using a circuit tester such as # PTW2991. I have included a link to a help article that explains how to test it. If some of the circuits are...
view full answer...
- Recommended Roadmaster Base Plate For 2013 Fiat 500 Abarth And Other Flat Towing RecommendationsFor your 2013 Fiat 500 Abarth, the Roadmaster base plate kit you are seeking is the Roadmaster EZ2 Base Plate Kit - Removable Arms, # 522013-1A. This is a confirmed fit for your vehicle. I recommend using Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube, # LT37420, when installing. If you need recommendations for the rest of your towing system, I've listed compatible parts for you. For a tow bar, I recommend the Roadmaster Falcon All Terrain, Non-Binding...
view full answer... - Diode Tow Bar Wiring Recommendation for 2011 Honda CR-VThe diode kit I recommend the most for vehicles like your 2011 Honda CR-V is the Roadmaster Diode kit part # RM-15247 actually. This kit comes with the diodes needed to wire your CR-V for combined turn signals plus a connector to mount to the front of your vehicle and a coiled umbilical extension wire with a 7-way on it to attach to your tow vehicle. This kit is essentially the # RM-154 with an the umbilical cable plus connector for front of vehicle. I attached an install video for this...
view full answer... - Parts Needed to Flat Tow a 2008 Honda CR-V with a Stowmaster 5000 Tow BarRoadmaster Base Plates, # RM-521559-4, for your 2008 Honda CR-V are compatible with all Roadmaster tow bars including your Stowmaster. You will not need any adapters to use the tow bar with the base plates. If you do not have safety cables, you will need to add some. You can use coiled cables # RM-643. The coiled design helps keep the cables off of the ground. For lighting I recommend a simple magnetic kit, # RM-2120, if you will not be towing the CR-V often. For a more permanent solution...
view full answer... - Wiring Recommendation to Flat Tow a 2002 Volkswagen Jetta Behind a 2001 Volkswagen EurovanThere are several ways that you can wire your Toad depending on a few factors including how frequently you want to tow the vehicle, the type of supplemental braking system used, and if you wan a more permanent or temporary solution for lights. If you will not be towing the Jetta often then I recommend a magnetic kit like # RM-2120 that will plug into the 4-Way flat once installed on the Eurovan. This bypasses the vehicle wiring so you do not have to worry about using a brake light relay...
view full answer... - Wiring for a Falcon 5250 Tow Bar and Can Towed Vehicle Tail Lights Be Utilized when Flat TowingYou can definitely use the 4-Wire Straight Cord tow bar wiring kit, # RM-98164, along with your Falcon 5250 Tow Bar. You may also want to use a couple of mounting brackets to secure the vehicle side connectors to the motor home and towed vehicle. We have a bent model, # RM-910030-5, and a straight model, # RM-910030, depending on your application. To use your towed vehicles taillights when towing with the motor home you will need a diode style wiring kit or a custom taillight wiring kit...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Sue W
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Rachael H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Video by:
Andrew L
Video by:
Alan C
Video by:
Chris R
Installed by:
Cole B
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jerry B.
2/2/2015
So far, so good. Weve only towed the car one way from KS to Fl. Everything working great. Thinking about adding a receiver hitch but, will take it to the dealer as we sold our farm, and our tools and have the grandsons arent available to do the hard work.