T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
(56 reviews)
Price: $102.83
T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
Our Price: $102.83
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (56)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring
- Custom Fit
- Trailer Hitch Wiring
- 7 Round - Blade
- Converter
- Tekonsha
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. T-One connector plugs into OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides a 7-way, blade-style trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 4-pole, 5-pole, and 6-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Tow harness with 7-way connector plugs into connection point behind rear bumper
- Converter connects in rear cargo area
- Includes Modulite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to avoid overloading your vehicle's electrical system
- Supplies required fuses to activate functions
- Constructed of 16-gauge bonded wire
Specs:
- Maximum amperage
- Stop/Turn lights: 4.2 amps per circuit
- Tail lights: 12 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's factory tow package wiring harness. The connection point for the 7-way harness is located behind the rear bumper. The converter plugs into the factory wiring harness in your rear cargo area, on the driver's side. You will have to remove the floor covers, cargo trays, and some interior paneling to access this harness. Once you've plugged in the connector, insert the included fuses into your fuse panel as indicated in the instructions.
Once installation is complete, the 7-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 7-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the separate brake and turn signals from your vehicle's 3-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118291 Tekonsha T-1 Connector - 7 Pole - Modu-Lite
Item # 118291
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2024 Honda Passport
- 2019 - 2023 Honda Passport
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Manufacturer issue
- etrailer mistake
Customer Reviews
T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector - 118291
Average Customer Rating: 4.6 out of 5 stars (56 Customer Reviews)
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. T-One connector plugs into OEM tow package wiring harness - no cutting, splicing or tapping required.by: Alex 04/26/2024
Good video instructions, fairly easy install and well built wire harness.
by: Tim02/23/2024
Easy plug and play with plenty of wire to get down to the 7 way. I was able to attach to a factory ground like one of the videos showed. It's been installed for one year with no issues.
by: Tim 05/04/2024
Perfect fit. Excellent quality and easy installation.
by: Paul G04/04/2024
Install took about an hour. Youtube video helped alot. Haven't had a chance to connect my trailer yet.
by: Jeff04/06/2024
Easy to follow video on how to install, it took less than an hour (as long as you have the right tools).
by: Alexis02/05/2024
The wiring kit did not come with a bracket for bumper attachment.
by: Michael05/03/2023
2019 Honda Passport
Easy installation, same as the factory factory installation documentation and photos. Recommend watching the 2019 installation on the etrailer website at My 2023 Passport had a large bolt on the frame of the cubby box rear floor support, so I used it for the ground wire. I also wanted easy access to the fuse if needed without removing the cubby box so I mounted the module on the driver side rear internal reinforcement where the storage box is. Which may for easy installation with no drilling, used the double sided tape and zip ties. Now if I need to check the fuse all I have to do is remove the storage box. Hope I never have to but you never now. The one time I had this problem prior on another vehicle it was caused by bad trailer wiring on a back road at night and raining.
by: Greg 02/03/2024
2021 Honda Passport
Really well made kit that fit like factory and had no issues installing.
by: Laura05/24/2023
Video installation instructions were extremely helpful. Everything was plug and play once one had gained access to the hidden factory connectors.
by: Robert 06/02/2023
It has been a good unit very reliable and have not have any issues with it.
by: R.J.06/14/2022
Wiring kit is good and almost installed as expected. This is not etrailer’s fault but the self tapping screw supplied for the ground wire had a smaller head than the hole in the wire end attachment. Of course I did not have a larger self tapping screw or a washer that would fit which necessitated a trip to get a washer that would work.
Sierra K.
6/20/2022
You must have received the wrong screw. Customer Service will email you.
by: Ken 07/23/2023
Honda Passport
Plug n play. Fit my Passport perfectly.
by: Phillip 09/24/2020
This cable connects to your car's connector to supply everything you need for trailer lights. Set up is quite easy. Thanks eTrailer.
Phillip P.
9/25/2021
This cable works like factory equipment.
by: Wayne 03/03/2023
2021 Honda Passport
I had trouble pushing white wire in soc ket.
by: Martin 06/20/2023
Great product price and Seller. Easy to install.
by: David 09/25/2022
Good wire harness. The YouTube Etrailer video and the paper directions are slightly different. Look at both. Bought a bracket and was short 2 screws. Etrailer did reimburse me the difference in the price change within the 30 days of the sale. Thank you
by: Richard 05/28/2021
The harness was pretty easy to install once you get the body panels off. Its plug and play so no wires to cut and splice. The only thing that happened was after 6 months I lost lights on the left side of my trailer. I contacted customer service and they told me chech the wiring before and after the control box to make sure it wasnt the car. Sure enough, it was the control box. Customer service resolved the issue immediately by sending me a new one. etrailer is second to none.
by: Thomas 01/24/2021
Honda Passport
This is a very high quality harness. Very easy to install, came with every thing you need. Installed this on a new 2020 Honda Passport. Took me about 30 minutes to install and that was taking my time. I ordered this with the receiver hitch and the bracket for the 7-pin plug that came with the harness. Everything was shipped for free and arrived in 4 days. Anyone with basic tools and knowledge can install this. Ordering this and installing it myself saved me over $1,300 compared to letting the dealership do it. I would highly recommend this to anyone.
by: Brittany 10/04/2022
Honda Passport
Easy to put together and YouTube video helped take apart the back end of the car and wire it properly. Only thing I didn’t realize was I needed an extra fuse. My car is 2021 passport so I needed one more.
by: John06/02/2022
Multiple parts missing from order and very difficult to speak with a person when calling.
Never had issues with etrailer in the past.
Jenny N.
6/20/2022
I will definitely have our customer service team reach out to you. We will have this taken care of for you.
by: Larry01/10/2021
The original order for the Curt custom fit harness was placed after several discussions with etrailer.com but despite assurances, it only partially worked and is being returned this week. After several conversations with Shanna S. at etrailer.com, I ordered the better Tekonsha trailer harness and it works perfectly. Had I talked to her first, it would have saved both of us much time and expense.
by: Kent02/15/2020
I purchased a hitch and this wiring harness for a 2019 Honda Passport. Delivery was fast and both products fit perfectly with easy install. Customer service at etrailer is the best I've ever dealt with. I highly recommend to anyone looking for accessories.
by: Mark04/25/2021
With the right components, tools and a few [online] videos, installing this wiring harness was a piece of cake.
I am very impressed with the customer support we received from etrailer. Nicole, who took the order, was fantastic and reassuring; she even checked stock while I was on the phone to make sure the hitch and wiring we needed was in stock and available. We were against a tight timeline and paid for expedited shipping - but the estimated delivery date was only a day before our departure. We received an email our hitch and wiring harness were shipped in less than 24 hours, and both came safely packaged day later, giving us plenty of time to install it before our trip. So pleased! Thank you etraler.com.
25
56
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- What Mounting Bracket Will Secure The Tekonsha 7-Way To a 2021 Honda Passport? You will be able to use the Mounting Bracket # PK12711U when you install the T-One Vehicle Wiring Harness # 118291 on your 2021 Honda Passport. This mounting bracket can be bolted to your rear fascia or attached to the mounting bracket on the Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 if you are also adding a receiver. You could also use the Mounting Bracket # C58000 if you have a receiver like the Curt # C13421 and do not want to drill into your rear fascia. This bracket mounts...
view full answer... - Will Curt or Draw-Tite Trailer Hitch For My 2021 Honda Passport Install In The Bumper Like OEM HitchNeither the Curt # C13421 or Draw-Tite # 76290 trailer hitch receivers you were looking at for your 2021 Honda Passport will mount through the bumper like the factory hitch would. These receivers mount just under the bumper and leave just the receiver itself visible once installed. If you are alright with that then I recommend going with the # C13421 as the absolute max possible towing capacity of your Passport based on its options is 5,000lbs which lines up with the 750lb tongue weight...
view full answer...
- Which Brake Controller and 7-Way Trailer Connector for 2022 Honda PassportI'd be happy to help with that! For a brake controller, the Redarc Tow-Pro Liberty you'd looked at, part # RED24FR would be an outstanding choice. The body of the controller installs under the dash where it's out of sight (also where you won't bang your knee on it). You'd adjust the controller via the control knob, which can be mounted anywhere within the driver's reach. An unused switch knockout on the dash or console is the perfect spot for installing the knob. If you don't have a switch...
view full answer... - How to Remove Pins on 2023 Honda Passport Tekonsha T-One Vehicle Wiring HarnessThe best way to unpin the T-One Vehicle Wiring Harness # 118291 is to first disconnect the power and then use a small flathead screwdriver to push the pins from one side while slightly pulling on the wire from the opposite side. You'll need to push and lift the pins to release them from where they are seated. You can also acquire a "wiring terminal removal tool" from your local hardware, home improvement, or auto store to have an easier time as well. Be sure not to pull on the wring too...
view full answer... - 7-Way and Brake Controller for 2021 Honda Passport Towing Camper with BrakesTo tow a trailer with brakes with your 2021 Honda Passport you'd first need to install the 7-way kit part # 118291 which is the same connector as your Flagstaff 228BHSE. Then for a brake controller we have the very easy solution of the Curt Echo Mobile wireless brake controller # C51180 which once plugged into an active 7-way and synced to a smart phone is read to tow without any additional wiring.
view full answer... - Recommended Brake Controller and Installation for 2021 Honda PassportI see that you'd looked at the Curt item # C51170 Spectrum Brake Controller. While I really like the idea of a remote-type brake controller that features a control unit that mounts out of sight under the dash with a knob that mounts within the driver's reach, I prefer the Redarc Tow-Pro Liberty, part item # RED24FR. The control knob of the Liberty is smaller, and if it's installed in an un-used switch knockout in the dash or by using a mounting bezel like item # 331-TPSI-001, you'll end...
view full answer... - Trailer Hitch Receiver And Wiring Harness For a 2022 Honda Passport TrailSportThe Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 for your 2022 Honda Passport is confirmed by Draw-Tite to fit all models including your TrailSport. The rear fascia and undercarriage of your TrailSport look identical to the chassis on the 2021 we installed on and have linked the installation video below. Yes the mounting holes that you have identified on your Passport are the ones for this receiver. We have a 4-Way Curt T-Connector Vehicle Wiring Harness # C56291 available for use...
view full answer...
- Brake Controller and 7-Way that Fits 2021 Honda PassportFor your 2021 Honda Passport if you have the 7-way part # 118291 installed you'd have everything you need to install and use the Curt Echo Mobile # C51180 that you referenced. You'd just need to plug in the controller to your 7-way and once it's synced to your phone would be ready to tow.
view full answer... - Recommended Trailer Hitch, Wiring Harness, And Ball Mount Kit For A 2022 Honda Passport SportTo tow a trailer with your 2022 Honda Passport Sport you're going to need a trailer hitch receiver, trailer wiring harness, and a ball mount. For the trailer hitch I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13421. Curt manufactures their hitches in the US for a quality you can trust. They have a superior gloss black powder coat finish over protective base coat that offers superior rust resistance compared to their competitors so you can trust that this...
view full answer... - Does the Draw-tite Hitch for Honda Passports 76290 Come with a Wiring HarnessI have a solution for you, but the Draw-Tite # 76290 does not come with wiring; this is fairly commonplace since not everyone will need a trailer wiring harness with their hitch. With that said, I recommend using the Curt T-Connector # C56291, which is a confirmed fit on the 2019-2021 Honda Passport (the same as the Draw-Tite 76290). This provides you with a 4 way trailer connector that has a powered converter to help protect your vehicle's electronics from shorts and backfeeds on the...
view full answer... - Recommended Trailer Hitch Receiver and 4-Way Wiring for Towing With 2022 Honda PassportFor a hitch for towing with your 2022 Honda Passport I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76290. This is a Class III hitch with a 2" receiver and a concealed cross tube. It features a black powder coat finish with an e-coat base as well as a limited lifetime warranty. This hitch has a maximum gross trailer weight of 6,000 lbs and tongue weight of 900 lbs. It is also compatible with a weight distribution system. For wiring, I recommend the T-One Vehicle Wiring Harness...
view full answer... - Is Tekonsha 7-Way For 2023 Honda Passport Compatible With Hopkins7- and 4-Pole Trailer ConnectorThe Tekonsha T-One Vehicle Wiring Harness # 118291 has a US car connector on the end of it. Since that is the same connector used on the Hopkins # HM40975 they are compatible.
view full answer... - Will The Draw-Tite Or Curt Trailer Hitch Receiver Sit Behind The OEM Panel On a 2022 Honda Passport?Both the Curt Trailer Hitch Receiver # C13421 and Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 will have the cross tube that sits behind the removable cover on your 2022 Honda Passport, but the receiver tube itself will still be exposed. This does save you from having to remove the panel and store it when you are needing to use the receiver. While both the receivers are nearly identical I do prefer that the Draw-Tite # 76290 already has the tab welded on for attaching either a 4-Way...
view full answer... - Recommended Wiring Harness for Towing Travel Trailer With 2019 Honda PassportIn order to use the electric brakes on your travel trailer you will need a 7-way on your 2019 Honda Passport. I recommend the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118291. This comes with everything you need to add a 7-way on your vehicle. If you also need to tow a trailer with a 4-way connection you can always use an adapter like the # PK12716. In addition to the 7-way you will also need a brake controller. I recommend the Curt Echo Wireless...
view full answer... - Mounting A 7-Way Connector To A 2020 Honda PassportYou're correct that this hitch is already set up with a mounting bracket. When you look at the product images on the page for the Draw-Tite # 76290, you'll notice that there is a bracket included to the left of the receiver. I've confirmed with the manufacturer that this bracket is designed for electrical connections to be mounted to the frame of the hitch, such as the one for the 7-way that is included in the Tekonsha T-One # 118291. While the # PK12711U is an excellent product that...
view full answer... - Easy to Install Brake Controller for 2020 Honda PassportIf you already have a 7-pin connector on the back of your Passport then, by far, the easist solution is the Curt # C51180 Echo Wireless Brake Controller. Simply plug one side into your tow vehicle 7-pin connector and plug your trailer into the other end. If you do not have a 7-pin connector you will have to start by installing the Tekonsha # 118291 wiring harness. This will easily install and provide the connections you need for trailer lighting and brakes. Fortunately the Honda has...
view full answer... - Recommended Trailer Wiring To Add 7-way to 2020 Honda PassportMaria, It is possible to put a 7-way on the 2020 Honda Passport with factory tow package with Tekonsha wiring part # 118291. This wiring harness will plug into the factory OEM port under the bumper and give you a 7-Way plug at the rear of your Passport. It includes all of the required fuses to activate the tow package. You will need the mounting bracket part # PK12711U and Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long part # C57202 to mount the 7-way.
view full answer... - Are Curt and Draw-Tite Class III Trailer Hitches for 2020 Honda Passport Hidden Behind BumperBoth the Curt # C13421 and the Draw-Tite # 76290 Class III hitches for the 2020 Honda Passport will install so that the hitch crossbar is concealed behind the vehicle bumper, but the receiver tube and the safety chain hooks will be visible. When the hitch is installed, the receiver tube will sit against the underside of the bumper fascia as shown in the provided photo. The main differences between the two are the weight capacity, as well as the fact that the Draw-Tite # 76290 provides...
view full answer...
- Trailer Wiring Recommendation for 2022 Honda PassportHey Tim, so the Tekonsha kit part # 118291 is the 7-way kit you'd want for your 2022 Honda Passport which installs easily and has the most reliable converter box. This is the 7-way blade connector though but if you want a 4-way you'd want the part # 118809.
view full answer... - How to Add a 7-Way Connector to a 2019 Honda PassportI would be happy to help you set your 2019 Honda Passport up with a functional 7-way connector. The Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package item # 118291 you were referencing will not work with an existing 4-way connector or function as designed by splicing it in. This adapter plugs into your vehicle's factory tow package wiring harness. The converter plugs into the factory wiring harness in your rear cargo area, on the driver's side. This adapter only works if you...
view full answer... - Curt 7-Way Mounting Bracket for Draw-Tite Hitch on 2021 Honda PassportI recommend using the Curt Mounting Bracket for 7-Way Connector Plug item # C67UR to mount your 7-Way Connector to your Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" item # 76290. The Curt mount item # C67UR will attach your 7-way connector to the left of your receiver so it stays out of the way and readily available for use. I have attached a picture of a Honda Passport with a similar setup to show you what yours will look like. I also recommend the Curt Towing...
view full answer...
- Troubleshooting Tekonsha T-One Vehicle Wiring Harness Ground Wire Not Fitting In 7-Way ConnectorIt sounds like you're having trouble fitting the ground wire in the back of the 7-way connector on your T-One Vehicle Wiring Harness # 118291. This is larger than the other wires so you need to make sure you are inserting the wire in the correct spot. See the diagram below. The ground wire fits in the larger hole on the right side marked "B." There is only one orientation for the wires to fit, and once inserted they will lock in place. It should not require a lot of pressure so if you're...
view full answer...
- Best Trailer Hitch And Wiring For A 2022 Honda PassportFor your 2022 Honda Passport, I recommend the Draw-Tite # 76290. This Class III hitch is rated up to 6,000 pounds towing and 900 pounds of tongue weight capacity, though you will need to check your owner's manual for your max capacities. It is a quick and easy bolt on application as well, so no drilling or anything. I included an install video for you to check out as well. For the wiring, I recommend the Tekonsha T-One Vehicle Wiring 7-Way Harness # 118291. This is also a quick and easy...
view full answer... - How Easy Is It To Install Curt Echo Wirless C51180 In 2021 Honda Passport?It is pretty easy to install a trailer brake controller like the Curt Echo Wireless # C51180 on your 2021 Honda Passport. If you already have a factory 7-way connector your will just need to plug the Echo into your 7-way connector and then plug your 7-way trailer connector into the Echo. If you do not already have a 7-way connector you will need to add one using the T-One Vehicle Wiring Harness for Factory Tow Package # 118291 which will plug into the factory harness of your Passport,...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Installed by:
Kathleen M
Video by:
Dustin K
Updated by:
Wilson B
Written by:
Alexander C
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dan
6/20/2023
Still works like the day I put it on the vechicle.