TorkLift Camper Tie-Downs - Custom Frame Mount - Front
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Numbers: TLC4203,TLR3504
Our Price: $948.30
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
part number: TLC4203
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
C4203 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
Item # TLC4203
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
part number: TLR3504
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
R3504 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLR3504
Customer Satisfaction Score:
83% were satisfied with this product
17% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Too difficult to install
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLC4203
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLR3504
Average Customer Rating: 4.7 out of 5 stars (3165 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Don 01/21/2023
The Superhitch is an amazing product. Had a couple now. Expensive but you get what you pay for. Purchasing from E-trailer is very easy and they delivered the product quickly.
by: Kevin F06/19/2023
Fairly easy to enstall good fit and fin ish.
by: Jon K02/21/2019
Great product for rear camper mounts. Easy bolt-on addition to Torklift hitch.
by: Dave 10/03/2022
2004 Chevrolet Silverado
They work great, but if you have full length wheel to wheel round tube nerf step bars, they will not clear them. I had to change my step bars to the cab length type. They will likely clear a flat running board, not sure. This was the only fitment issue i had.
by: Brad T03/25/2018
Magnum 30K & Camper Tiedowns TLF2022 & TLR3504
by: Doug 02/28/2024
Arrived earlier than expected. Kudos to Arthur D for all of his assistance!
by: Doug07/02/2023
Absolutely amazing!!! Love all the products I've purchased from etrailer.
As always.... Customer service is more than 5 star if I could give it.
by: Ralph 01/25/2024
Quinn was great to deal with and took care of my order.
by: Ernest 09/10/2022
Simple install with the torque lift heavy duty high box reciever
by: Gary R. 12/01/2016
I believe this review is for the rear tie-downs. I like this Torklift tie-down system a lot, works well even for my heavy Artic Fox camper. This one fits right into the current hitches Torklift is selling which are also quite useful. The instructions are easy to follow and the videos are helpful. Get the FastGuns as well, you'll appreciate them after just one use, and more every time you use them.
by: Matt 07/15/2023
They do what I want them to
by: Clinton 11/30/2022
Works well with super hitch
by: Brad 09/26/2022
Wow what a difference compared to the competition that I’ve used before. The camper isn’t going anywhere with these tie downs!
by: Kurt04/10/2022
Work good but rust, fade, chip and look bad very quickly. I take care of my vehicle and wash often but they look bad quickly.
Heather A.
4/21/2022
These are powder coated to resist rust but it is still a good idea to periodically spray them with fresh water if they are exposed to salt water or salt on the roads. I do recommend to lightly sand any surface rust off and cover those areas with a rust prevention spray paint.
by: Michael 07/08/2022
Fast delivery. Easy install. Install this during your super hitch install and save a step. 4 bolts and your done.
by: Michael 03/27/2021
Excellent rear camper tie downs! Super easy to install! Shipping was good as I paid for the 3 day delivery.
by: William 11/09/2020
10 minute install with superhitch magnu m.
by: Marc R06/06/2019
Solid mounting design. Strong hold and no signs of fatigue after 1 year of use.
Paint did chip after 6 months of road use.
by: Scott09/03/2019
Super easy install once you have the hitch in.
by: Nicholas08/31/2021
Best option that I've seen.
by: Micheal 02/18/2021
Great fit and good instructions.
by: Wade06/22/2021
I have owned this for one year and it has worked flawlessly.
Wade
6/23/2022
one year and no problems.
by: Gary01/20/2019
Good product great service
Slight problem clearing the exaust pipe
by: Chase12/03/2022
Delivered was late
by: Randy01/23/2016
Once I figured it out..it went together smoothly and does the job...
25
2434
Show More Reviews Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
- Recommended Heavy Duty Camper Tie-Downs for 2002 Chevrolet Silverado 2500 With Factory Hitch
- Custom camper tie-downs that are mounted to the frame of your 2002 Chevrolet Silverado 2500 with 6-1/2 foot bed will be a lot more secure and stable than the clamp on, bed mount versions. They are custom built for your truck so they're compatible, and they mount to the base of the truck to distribute weight better and prevent the camper from being too top heavy.
For your Chevy the compatible TorkLift Custom Frame-Mounted Tie-Downs # TLC4203 are what you will need for the front. For
view full answer... - What Are the Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2004 GMC Sierra 2500 HD 6-1/2 Bed
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2004 GMC Sierra 2500HD with 6-1/2' bed are as follows.
With Boards or Steps With Factory Hitch - front part # TLC4203 and rear part # TLC3205
Without Boards or Steps With Factory Hitch - front part # TLC2202 and rear part # TLC3203
If you have a different trailer hitch please just let me know what that is and I will make sure you get the correct tie-downs. If you don't already have turnbuckles then I recommend using
view full answer... - Torklift Tie Down Recommendation for 2008 GMC Sierra with Long Bed and Factory Hitch
- How long is your truck bed and what hitch do you have?
view full answer... - Frame Mounted Camper Tie Downs for 2005 Chevy Silverado 3500
- The correct frame mounted tie downs you'd need for your 2005 Chevy Silverado 3500 with running boards and a factory hitch is the Torklift Tie Downs part number # TLC4203 and # TLC3206 for the front and rear.
view full answer... - Torklift Camper Tie Downs that Fit 2004 Chevy Silverado 2500HD with Factory Hitch and Running Board
- The Torklift Tie Downs part # TLC4203 and # TLC3205 fit your 2004 Chevy Silverado 2500HD gas with a short bed, running boards and a factory hitch. If you had a long bed you'd instead use the # TLC3206 for the rear set instead of the # TLC3205.
view full answer... - Camper Tie Down Recommendation for 2007 Chevy Silverado 2500 Extended Cab Short Bed
- For your 2007 Chevy Silverado 2500HD extended cab short bed the Torklift Camper tie downs part # TLC4203 and # TLC3209 are the best option. Frame mounted tie downs are a lot more secure and provide a much more stable driving experience too since the bed doesn't sway side to side like the bed mounted options.
view full answer... - Will Camper Tie-Downs From 2004 Chevrolet Silverado Fit 2003 GMC Sierra Truck
- The best way to make sure the camper ties you are considering is to get as much information about the vehicle they came off of and compare it to the camper ties available for your truck.
You will need to know the cab style, and if the truck had running boards or steps, and what kind of trailer hitch the truck had.
Once you get this information let me know the details of the truck they came off of and the same information about your truck. You already furnished the year, make, model
view full answer... - Tie Downs for 2003 Chevy Silverado 3500 Dually
- For your 2003 Chevy Silverado Crew Cab dually the correct Torklift Tie downs you'd want are the tie downs part # TLC4203 and # TLC3206 and you'd be set.
Then for a set of turnbuckles to attach from from you camper to the tie downs the part # TLS9529-2-LK would be a great option as well.
view full answer... - TorkLift Front Camper Tie-Downs for 2005 Chevy Silverado 2500 With 8 Foot Bed
- The TorkLift option you mentioned are the highest-quality camper tie-downs so they are a great choice, and we do have front tie-downs that fit your 2003 Chevy Silverado 2500 HD with an 8 foot bed. The correct front tie-downs will simply depend on if you have running boards on your truck or not.
- With NO Running Boards: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2204
- With Running Boards: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC4203
view full answer... - Front Camper Tie Down Fit for 2005 Chevy Silverado 2500
- The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC4203 are a confirmed fit for your 2005 Chevy Silverado 2500. This part includes 2 front tie-down inserts, frame brackets and necessary hardware. The brackets fit tight to the truck frame so there is no loss of ground clearance.
For your turnbuckles you can use the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4 # TDHP or the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty
view full answer... - Camper Tie Downs Mount to Existing Frame Holes or Is Drilling Required for 2005 Chevrolet Silverado
- Yes, the TorkLift Custom Frame Mounted Camper Tie-Downs, # TLC4203 and # TLC3206, will fit your 2005 Chevrolet Silverado with running boards and factory installed hitch.
I spoke with my contact at TorkLift and he said that the rear tie-downs will not require any drilling for installation. The front tie-downs will require you to drill two 1/2 inch holes, in the side of the frame, on the driver and passenger side of the truck. He did mention that location for the holes were fairly easy
view full answer... - Recommended TorkLift Truck Bed Camper Tie Downs for 2019 Ford F-350 Long Bed
- Torklift offers two tie down options that will work with the way that your truck is configured, as long as you're not using the Torklift Hidden Power battery mounted under the bed and the truck doesn't have the factory flip-out bed steps.
For a high level of corrosion resistance, I'd go with the aluminum/stainless steel construction of the Torklift Talon, part # TLF2021A for the front, and # TLF3008A for the rear. For powder coated steel, use # TLF2021 up front and # TLF3008 in the rear.
If
view full answer... - Which TorkLift Camper Tie Downs Fit 2022 Ford F-450
- Thanks for all of the info you listed of your 2022 Ford F-450. Based on that the Torklift Camper Tie Downs you'd want are the part # TLF2021 and # TLR3504. I attached an install video for these on a similar F-450 for you to check out as well. For a set of turnbuckles the stainless steel set part # TLS9529-2-LK would be a great option as well.
view full answer... - Rear Torklift Camper Tie Down for 2008 Ford F-350 with Superhitch
- Hey Mark, you would need a new set of rear Torklift Tie Downs since you installed a Superhitch on your 2008 Ford F-350 which for that you would want the part # TLR3504.
view full answer...
TorkLift Accessories
Fit to this rack on your 2005 Chevrolet Silverado
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Sue W
Installed by:
Cole B
Installed by:
David F
Test Fit:
Shane T
Test Fit:
Clayton O
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado Accessories
Product Experts Available Now!
Call 1-800-940-8924
Don
1/27/2024
Love Torklift equipment. Expensive but worth it. Wouldnt buy anything else.