Summer Starts Here - Save up to 70%
Roof Rack Includes:
Part Numbers: RRVA137B-2,RRSX100
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your Acura MDX. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Specs:
These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.
Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.
Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).
Durable nylon legs let you mount Vortex Aero crossbars to your vehicle's factory elevated side rails. Custom-fit leg clamps tighten with included tool for easy installation on your rails. Pair with 2 crossbars to create a complete roof rack.
Features:
Specs:
Average Customer Rating: 4.7 out of 5 stars (3617 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. Durable nylon legs let you mount Vortex Aero crossbars to your vehicle's factory elevated side rails. Custom-fit leg clamps tighten with included tool for easy installation on your rails. Pair with 2 crossbars to create a complete roof rack.Package, both items appeared used, but in good condition. The legs were not in the factory box, but just a eTrailer box. The instructions were hard to follow, even with a little help from YouTube. Just about to test drive to check the noise level. Time will tell, there is soft rubber on the legs and it may be wise to remove these when not in use, especially during Florida summers.
Rhino rack products are superior and I prefer them over Yakima or Thule.
However, I would like eTrailer to know, and to warn other customers that over the years the items I order from them always come with cosmetic damage or missing parts due to insufficient packaging.
In this case, my Vortex bars were shipped in the retail box which had opened in transit so two of the end caps escaped and are who knows where. Under a conveyor belt line in some UPS building or in one of their trucks somewhere.
This is not an issue as these end caps I intended to dispose of replacing them with the locking end caps I ordered with my bars and towers.
etrailer, I do not need resolution for this issue but your track record with packaging and shipping is sub par. Please step up your game so your customers receive complete orders.
Jenny N.
7/7/2023
I know that you are not looking for replacements. I hope that you will have a good experience with the rack and I will share your experience with our shipping department.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
Look great, and function great. Just make sure you find all the parts packaged inside the rails themselves after you open the box!
I haven’t installed rack yet and everything appears to be in order.
* I wasn’t anticipating that Rhino -Rack Sports Ladder Peg (s602) be made of plastic.
Does it have the strength, durability to perform well and not get brittle in colder temps?
Jenny N.
12/1/2022
I wanted to let you know that the racks to do have longevity in all type of weather and are made to be taken off and on the vehicle.
James
12/2/2023
I purchased the rack and pegs a year ago. I was just recently reflecting on how well the racks have worked out for me with my work. I’m glad I made the investment in them, it was worth it.
Mike L.
12/2/2023
Great strength and look. I love em. About to put on the kayak racks and get some fishing going.
I own a 2013 Honda CRV I purchased a couple months ago. It has a naked roof and no rack or side bars, and I wanted to be able to carry up to three kayaks. I didn't really want to buy and install the side bars, and then the cross bars also. I also needed the cross bars to be a little wider than the vehicle itself, as I own two Ocean Kayak Scupper Pros, and a Venus.
This Rhino Rack package looked like a great option for my needs. Weight wise, the three boats come right to the limit. Other racks had lower weight limits, and wouldn't work.
I had a couple issues with the initial package, but etrailer took care of the problem right away, and sent out what I needed.
Installation was pretty smooth. I recommend reading and rereading the instructions, before you cut anything. The videos on the etrailer website or directly on YouTube are very helpful to see all the steps. I'd like to see more personalized instructions added in the future, just to to make everything even smoother. Make sure you identify your vehicle and the bar you received on the kit instructions before you start.
These bars are so wonderful. The aero bars make no noise when driving and no whistling that I can tell. They don't seem to effect my gas mileage. I made sure the top rubber strips and bottom measurement strips were cut perfectly with no gaps, as this is important to prevent whistling.
They look so stylish. I get complements on them, and people can't believe they are after market, and that I installed them myself. They really complement the vehicle. Once installed the first time, I can take them off or put then back on in about 12 minutes. I don't really plan to take them off though. I don't use car washes, and I like the look of them on my vehicle.
I made sure to not overtighten them, and then tightened them a few times over the next week and with a couple kayaking trips. These babies are strong and I can't make them move when I test them. I still check them regularly to make sure they are secure, for safety purposes.
I highly recommend this Rhino Rack package. They know how to make the perfect roof rack and you can tell the quality and thought that went into them. Look at my photos I have included.
Thank you to etrailer for such great service. You made the whole process so pleasant and easy.
Using Rhino-Rack Vortex Aero Crossbars, Using Rhino Kayak holders. Also use a Rhino bicycle rear receiver mount. Love Rhino products.....strong, well engineered, low noise, and every part is quality... mounts, straps, etc. Photo is departure picture from last years trip to Big Bend, Texas. We probably put a couple thousand miles on these pieces of Rhino equipment on all types of roads at both Big Bend Park and Big Bend State Park... You really cannot go wrong buying Rhino products. Everything they make is well designed and will not disappoint.
Glynn D.
4/20/2021
Rhino products are just great products They work today like the day I bought them and they show very little agewear. You really cant go wrong with Rhino products.
Awesome parts. Strong grip and kudos on the rubber flares for the seal.
Holds two kayaks on the roof rock steady. Did some highway miles, back roads, bumpy roads, all locked in place. The problem is that when there are no kayaks up there, the wind creates a very loud whistle sound that grows with the speed. Its gotten so bad that we tend to avoid using the car these are on for anything but driving kayaks around. Probably going to have to remove them for daily driving and put them on again when its kayaking time.
I bought these for my 2013 Rav4 primarily to transport wood from home depot. Getting the bars safely installed and latched onto the cars longitudinal bars was pretty simple. The problem was the whistling. The cross-bars having a tee slot will whistle if you don't properly cut and install the 2 types of rubber/plastic tee-slot blocks provided. There is a slot block for the top, and for the bottom. The top one is easy to install since it is just one piece, but the bottom one requires 4 piece of this tee-slot block (2 outer pieces and 2 inner pieces. It took me a while to get the bottom blocks installed, quite a bit of measure, test cut, check, remeasure, cut, insert, recut yada yada.
Once I thought I had everything right, I could still hear whistling on the freeway and had to re-cut some better fitting bottom slot blocks. It turns out the more you tighten the legs, the more of the tee slot is exposed, and you need to have more of the tee-slot block. Having looked at some of the equpipment you can attach to the top of these tee-slot racks, I don't see why the bottom tee slot is even necessary.
Anyway, once installed (properly), these bars work great. I can transport wood Lol
I give all 5 stars for the product and service, but...I prefer the parts to be all in one carboard, also I was a little panicking looking for blue plastic key...It was inside of cross-bar ??not falling out with strips. Anyway,
I"m owner of Honda cr-v 2022 with bare roof ,and I just installed the rack. Was it simple enough? Yes,so I can share this:
First, rubber pads are all the same, and after placements to plastic legs should be placed with arrow*out*-that is it(a lot of info regarding vertical parts, that they are all different)??
Second, on other hand, in video we informed that clamps are same -they are not. Bigger "hooks" are for rear bar, smaller ones-for the front one.
Third, do not expect precision in rubber pads position(especially on rear bar)regarding plastic rail strips on bare roof.it is not achievable, just try to make same look on both sides.
I was worried about rain and water gets inside. Well, let us see.
What I plan to care on rack? Just a small 6ft step ladder. Believe me or no CR-V is my business vehicle ,and ladder carry was the goal of rack purchase. And only question I have if I can get to underground parking with no problems to cross the front entries usually limited with 6 ft in heights I will find out soon, but rack height plus ladder on it makes me worry.??The review will be update soon. regards.
This rating is not for the product and solely on the practices of ETrailer. ETrailer erred and did not ship this product when they confirmed and when called to check the status charged me an additional $xx plus for overnight shipping in order that I have the product in time for our trip. 2 of the 3 parts of this order did arrive on time and in good shape, but the fact that Etrailer charged me additional for their shipping error does not sit well with me at all and I would never recommend the company to friends.
Katrina D.
12/14/2023
I am sorry to hear that your items did not arrive on the day that you had paid for. I see that our customer service department is currently working on getting some compensation figured out for you.
These crossbars are perfect! I have a Pelican Cargo Box that I put on the rack when I'm traveling and it is 100% secure. They are pretty noisy, especially when driving perpendicular to the wind direction, but I expected that considering they are sitting on top of a tall truck. The rubber pieces that fit into the tracks are still in good shape and haven't cracked or loosened. They look good on my all black truck, too.
Its been one year since I installed the Rhino Rack crossbars and I have absolutely no issues. The main use is to carry my Kayaks on my 2013 Subaru Impreza utilizing Yakima JayLow kayak carriers. The only caveat is to be sure to properly cut and install the plastic channel inserts (underside) or you will experience an annoying whistling sound. If you're looking for high quality crossbars, I highly recommend these.
I liked doing business with you. I like the products I ordered. I did have trouble with part of the shipping. It was not your fault, but the part of the shipping you used The USPS did not work. I neverrnecieved the item from them and you had to ship me another via UPS. Over the last 10 years I have had a number of problems with the USPS with packages and mail. They are especially difficult to get information from when something seems to be lost. I would recommend not using the USPS for your shipping needs. Again, I am very happy with you and the products I bought from you.
These Aero Racks are perfect on my Scion XB, stylish cool look & importantly Quiet with absolutely no wind noise! Also bought the Rocky Mount Cargo Basket & it comes WITH a full bunji net cover. It is also quiet with no wind noise & you can tie surf gear on top like racks (use padded rack pads) & or put things inside for more carrying space. Also a cool stylish look on the Scion XB or any other compact car like my wifes Toyota Yaris... We move it back & forth to who ever needs the Cargo Basket for the days Adventure.
I purchased a full kit for my 2017 Ford explorer, connectors, Feet and these cross bars. I will use them for hauling my roof top box on trips as well as other things that will not fit in my vehicle. The install is farily simple however some of the tools provided for tightening are not the best. Luckily I had a number of other tools to get this complete. The main thing I feel is needed is a socket allen key to tighten down the cross bars nice and tight. The allen key provided is difficult to work with and get the leverage you need to snug the bars down.
Another tip is to be sure to use the excess measuring closure to close off the inside of underside of the bars. Use a box cutter to cut the excess and fit it to the inside. I read some reviews about noise and I have zero noticeable noise. Do not tighten the bars down until you have this all inserted in and slid under the feet. Then snug it all down. If you do these things and close all the gaps the bars are almost silent.
The bars look great on the vehicle and seem very sturdy and solid. I would have no reservations hauling ladders, lumber and all of the typical stuff you see on roof racks. The rubber strips are heavy duty and add a nice non slip feel to the top of the bars.
Very nice bars that I mounted on a 2019 Highlander. I have owned multiple vehicles with Thule square and Yakima round bars that were noisy. These are so quiet I don’t know they are there. Very sturdy, and the rubber insert helps to keep load from sliding.
I purchased Rhino-Rack Vortex Aero Crossbars with Rhino-Rack 2500 Series Legs (RRRLKVA) and Fit Kit (DK284) for my 2020 Honda CR-V EX Hybrid. The rack was easy to assemble and took about an hour. The only tool not supplied that you need is a sharp knife or scissors to cut the rubber strips to length. Once assembled, the installation took about 30 minutes, making sure to measure accurately for placement. I used blue painter's tape to initially mark the locations. I then placed the white marking arrows (supplied) to align with the marks on the tape. I then removed the tape, placed the racks aligned with the arrows, and tightened the clamps.
This product seems well made and engineered (I'm a retired mechanical engineer). Kudos to Rhino-Rack and to etrailer for selling it.
Good sturdy product. Only reason I don't give 5 stars is that the lockable plastic cover on each ends of the bars, some don't lock, seems like a little lack of adjustment. Other than that, very satisfied.
Just what I was looking for for my 2021 MB Metris Cargo Van with Raised Rails, for hauling a 14-foot SUP. I wanted as low profile as possible and the Rhino Rack SX Series Legs and Aero Crossbars looked best. Relatively easy to set up.
Fairly easy to install onto my 2017 Honda CR-V. The crossbars feel very sturdy and are securely attached to the vehicle. Took me about 30 minutes to get it installed and could be done even quicker if you get help from another person. The bars themselves are a little fat so my Thule ski rack has a super tight fit. There is very minimal wind noise, so I'll probably be getting a fairing for that. The instructions felt a bit jumbled but with just the measurements alone, you can install it with a bit of common sense.
The crossbars are great, but the rubber strip in the middle gets bunched up or comes out when loading heavy items across the bar. But the rubber provides grip, and the grip is amazing. I am not worried about kayaks or rafts sliding around. I do need longer ones though...
I am very pleased with the etrailer.com. Easy to navigate website and expedited shipping for no extra cost. I ordered and received my product in about a week, which is very reasonable for being across the country.
The product arrived in tact and with no damage. Easy to put the rack bars on my jeep. I've included pictures of the completed result. We plan on buying the attachments that will mount our bikes and when we do we will be doing so from etrailer.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Rhino Rack Accessories
Fit to this rack on your 2009 Honda Pilot
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
11/13/2023
I really like how the racks are holding up. I kept them on the Jeep, but it is garage kept. I like them much better than my Thule racks. I havent put a kayak up there yet.