SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: SB324-080,31198
Our Price: $2,478.75
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
part number: SB324-080
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric winch allows you to easily raise and lower plow
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front trailer hitch receiver
- Blade dimensions: 82" wide x 19" tall
- Height adjustment: 9"
- 3 Blade angles:<>
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Winch lift capacity: 3,000 lbs
- Weight: 315 lbs
- 1-Year limited warranty
Notes:
- Due to the size of this item it ships via truck freight.
- Bottom of 2" receiver tube must be 13" from the ground.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31198
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Utilizes existing factory hardware
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Installation instructions included
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31198 Curt Front-Mount Trailer Hitch Receiver
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31198
Average Customer Rating: 4.8 out of 5 stars (145 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Paul Meudt02/01/2024
2022 Toyota RAV4
Shipping was fast and packaged good with no scratches.
I modified my 2010 Tundra skid pan for oil filter changes before mounting.
Replaced all 4 OEM tow ring bolts using anti-seize with new longer M12-1.25 X 40MM class 10.9 zinc finished hex cap screws along with new M12 X 24MM OD HARD WASHERS and torqued all 4 to 79 ft/lbs. Mounted new Thule EasyFold XT 2 Hitch Bike Rack and it fits in front without using the hitch extension.
All went together as planned and can now take E-Bikes with us while pulling our camper. We are happy campers!
by: Mike07/25/2023
This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.
by: Alex183803/09/2014
2014 ToyotaTundra
I bought and installed the front hitch to my 2014 Toyota Tundra because I did not want to use my travel trailer's rear bumper. The 2014 Toyota Tundra has a skid plate that has to be removed for oil changes and this front hitch installed would also have to be removed each time the oil is changed. I decided to cut a square hole in the skid plate allowing access to the oil filter so that the skid plate along with the front hitch would not have to be removed to get to the oil filter.
The skid plate has 5 bolts and 3 screws and drops down for oil changes. To completely remove the skid plate after removing the bolts and screws you have to hold the skid plate and move it to the drivers side to unhook two hooks which are "L" shape facing the same way towards the passengers side. Do not leave the skid plate off because too many hoses and lines will be exposed and can be damaged while driving.
It took me less than 20 minutes to install the front hitch and I also bought a Hitch Extender for a 2" Trailer Hitch 7" which made the hitch come even with the front bumper on my 2014 Toyota Tundra.
I bought several other accessories to go with the front hitch which I can use when needed. I did buy this hitch mainly to use to carry my 2 beach cruiser bikes and it works perfect.
Now all I have to do is insert the bike carrier into the receiver hitch and load the bikes and I am off with no worries about the bikes being in the rear of my travel trailer or trying to keep them steady in the bed of my Tundra.
The bikes look really good in front of my Tundra and my driving view is not blocked at all with the bikes on. With the 7 inch extender the bikes are nowhere near the truck and with the Anti-rattle with lock on the 7" trailer hitch receiver there is no swaying while on the road or on the freeway at any speed. Thanks etrailer.
Mike F.
8/13/2015
Do you use any type of strap from the body of the bike rack back to the hood for stabilizing the bikes while on the road? I do not know where such a strap would be secured but I have seen some tuck them under the hood and close the hood on the end of the strap thereby securing the strap that runs from the rack under the hood lid. Does this question makes sense? Maybe such a support straps would not be required with this setup.My Tundra is a 2012 and I am assuming the skid plate is similar to yours. My bike rack looks to be much the same style as in your pics.Thanks.
Alex 8.
8/17/2015
Mike F.I dont think a strap for this type of bike rack would be needed. Even though I did use a rachet strap and made the connection from the tow hooks to the bike rack to keep it from bouncing at one time. Except for that one time I have never had to use a strap at all. Also use an Anti-Rattle Trailer Hitch Receiver Lock to keep the connection secure and tight. I make sure the bolts to the hitch and the hitch extender adapter are tighten to the fullest and the velcro straps that go around the bike tire rims are tight and secured. The hooks that go down on the bike frame are pushed down and then tighten. I have traveled throughout California with these bikes and never had a problem. Of course I always check the connections. I bought several bolts and washers for the hooks to tighten in case the bolts strips which has happened twice.Alex
Rachael H.
8/18/2015
Thanks for the follow up Alex. Please also keep in mind that using a hitch extender will reduce the capacity of the hitch by 50 percent.
Terry K.
1/29/2016
Alex- can you tell me what other parts extension, lock, etc you purchased from e-trailer for your application. I just received this unit from them. Also, how did you cut the hole for oil filter removal? Would a Dremel tool work for this? Thank you for any assistance you can provide..Thank you, Terry .
Alex1838
2/5/2016
Terry K. I also bought a Hitch Extender for a 2 Trailer Hitch 7 which made the hitch come even with the front bumper on my 2014 Toyota Tundra. I bought several other accessories to go with the front hitch which was the Anti-rattle with lock on the 7 trailer hitch receiver there is no swaying while on the road.For your question onhow did you cut the hole for oil filter removal? Would a Dremel tool work for this?I guess a dremel would work but what I used was a metal snip cutter. I bought one at home depot for about $9.00 and to start the cut I drilled a large hole at the corner of the square to be cut and then I just snipped along the square like a pair of scissors. I then filed the opening and on the square metal piece I also bought drilled several holes as I attached it to the skid plate.
by: David E.06/26/2012
2011 ToyotaTundra
bought this for my 2011 tundra, I launch my boat (5500 lbs) at a private ramp where a front mount hitch is pretty much required due to the tight access. Anyway this mounts to the front frame between the factory tow hooks on the 07-12 tundras. Does not take any time at all to install it. It weighs 29 lbs according to my scale. . It does not hang down any lower than the TRD Package steel skid plate, so I liked that. It looks plenty strong for just about any towing/launching activity I can think of with my truck.
You may need a 6-8 inch hitch extension to mound your receiver. But I would rather have to use an extension then have the hitch. itself stick out any farther forward. You may have to remove it to do an oil change, not sure yet, either way, no big deal.
Pete
10/20/2013
David or anyone!Nice writeup and photo to help us in this purchase. Can you tell me if you had to remove the hitch to complete an oil change sir? It looks like you need to remove the hitch to get the skid plate off, but wasnt sure. Thanks,Pete
David E.
10/23/2013
This front reciever will need to be removed to do an oil change. The 2 toyota dealers that have worked on my tundra did not have a problem removing it. They did not charge me any more for an oil change.
Patrick B.
7/28/2014
Remember that the hardware included with hitches is usually torque-to-yield, TTY. This means that the hardware is only meant to be torqued once. If removed, the hardware should be discarded and replaced. The instructions do specify a 4 inch hole to be cut that allows easy access for oil changes. Its at the top of the pages in an in-set diagram. Its an easier solution than removing each time and it doesnt significantly reduce the protection the shield provides.
by: Steve 05/07/2024
Primarily bought the front receiver hitch to haul our 2 e-bikes. Did that because it was easier than hauling them inside our camper. And didn’t trust them bouncing around on the back bumper of the camper. Hauled the bikes that way on several camping trips. Easy as pie and I could keep an eye on them the whole trip.
by: Gino05/28/2023
2016 ToyotaTundra
Fit perfectly with tow hooks on my 2016 Tundra. Had my mechanic install it and cut the hole in the skid plate. The receiver is shown with the Kuat Hi/Lo hitch extender and a bike rack.
by: Kathy 02/26/2024
ToyotaTundra
We chose the Curt Front Mount Trailer Hitch Receiver so we could safely transport our RAD electric bikes while also pulling our travel trailer.
We had it professionally installed onto the front of our Toyota Tundra and it has worked out very well!
We are very pleased, and glad that we have it!
by: Kevin04/29/2024
2017 ToyotaTundra
The receiver was easy to install on my 2017 Tundra. I used a 4” hole saw to cut a hole to provide access to the oil filter. I carefully measured for the location of the hole as the drawing provided appeared to place the hole on the passenger side of the truck although the actual location is the driver’s side. Also, the instructions called for “return the tow hooks to the customer” for 2017 models, but I installed them just fine. That must have referred to a different Toyota model.
by: Bill W08/28/2016
2010 ToyotaTundra
I got this receiver for the front of my 2010 Toyota Tundra pickup truck so that I could mount a Fishin Mate beach cart on the front of the truck when my travel trailer is hooked up to the rear receiver. The Curt front receiver is all I hoped it would be. I have used it for a year now, having made one trip from my home in Virginia to Cape Cod, and another trip to Florida. For a two months stay in Florida, I used the cart on the front or rear receiver several times a week. The Curt front receiver is of the highest quality. It was simple to install. You take two bolts each out of each of the two front tow hooks mounted on the front of the frame, hold up the receiver to line up with the holes in the frame, hold up the tow hooks back to their position one at a time, and reinsert the original bolts. (Simply put, the receiver is inserted between the tow hooks and frame.). The first time I installed it, it did only take the twenty minutes or so that people say it does. I have chosen to not cut a hole in my skid plate under the engine, so when I change the crankcase oil and filter I have to remove the Curt receiver and skid plate every time. It takes some time, but I'm okay with that. It's that easy. I am 72 years old, and don't have the strength I used to have, so I can't manhandle the receiver and skid plate, but instead balance them on the cradle of a floor jack and finesse them into place. I've got the knack of it, and it goes well. I did not get a riser bar to elevate the cargo from the height of the receiver, so my cart carrier goes straight out the front. It is close to the road, but not so close as to have ever scraped going in and out of gas stations. I remain aware of it and am careful. The Curt receiver has traveled thousands of miles over a year now, has been off and back on twice for oil changes, has remained new looking, and has met all my expectations. E-Trailer, as always, remains the best internet shopping business I have ever dealt with.
by: ArkansasTraveler06/05/2017
2016 ToyotaTundra
Purchased and installed a Curt front hitch in 2016 for my 2011 Tundra. The installation was very easy. I tow a travel trailer and use the front hitch for a bike rack.
by: Matt L05/03/2018
2015 ToyotaTundra
Installation was easy, even for one person (and the help of a lift). The hardest part was removing the skid plate from the Tundra. Couldn't be happier.
Matt L.
5/4/2019
It’s been perfect. Modifying the skid plate so it doesn’t have to be removed for oil changes was the best idea. The hitch makes hauling an extra cooler and fishing rods so much more convenient.
by: Bee01/02/2020
2011 ToyotaTundra
Installing was a breeze. I used a floor jack to hold out up while screw the bolts in. Done in 15mins. Looking at other pictures I see, it looks like it was fairly low to the ground but in reality, it's not as low as the pictures make it look. I have no use for it now but future plan is front tray and maybe a plow. The finish is very nice. I cut a removable filter access in my skid plate instead of leaving a big gapping hole. It's a very nice hitch to have.
by: John12/20/2023
It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.
by: Bill11/17/2023
The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!
by: ‘Los08/04/2021
This is my second purchase of this product. etrailer shipment was fast and delivered ahead of scheduled. Easy fit and installation. I did modify OEM engine plate for future engine oil service.
by: Scott 10/31/2023
2007ToyotaTundra
Great for moving airplanes with my truck! It's harder to do than a maneuverable tug that's designed for this task, but I CAN do it. I have a Cessna 310 which I can't push myself without help. Anyone with a heavy airplane should get one of these.
Fitment is perfect. Installation is really quick (10 minutes) and easy on my 2007 Toyota Tundra. It helps to have friend hold it in place when running the bolts in.
by: Bruce04/15/2019
Simply the best way to maneuver your trailer into tight places you can see everything. Because it’s on the front end of your truck excellent product excellent quality thank you E trailer.
Bruce
4/16/2020
Works great just like advertised and it’s made in the USA !!!!
by: Robert 04/25/2024
The only thing I had to do was make the tubes
Longer for longer rods
by: Louis11/16/2017
I use this hitch to tow my motorcycle carrier and motorcycle. I've gone over ten thousand miles with the bike on the hitch without a problem. It's a great easy to install product.
by: Paul 06/13/2024
If you can use a ratchet, it is a very easy install.
by: Ty01/24/2023
The hitch is great and was easy to install. My problem came when I went for an oil change.
The mechanic said he would have to remove the hitch to then remove the skid plate so he could get to the oil filter and plug.
I have not reinstalled it since then. I’ve been researching a work around like cutting a little door or hole into the skid plate to facilitate future oil changes.
Still trying to figure it out.
If you buy this hitch, keep this in mind.
Jenny N.
1/27/2023
I do know that you would want to enlarge the hole in the front skid shield to allow access to be able to change the oil filter. Were you able to take this step when installing the hitch?
Ty
1/27/2023
Not yet. Was going to ask the advice of my mechanic the next time I get the oil changed.
by: Gerral07/25/2023
Hitch feels like good quality. When I bolted it up. Holes lined up perfectly. I'll be putting the 500 lb vertical load to the test soon. Will give a update. Thanks for the great service.
by: Chris 08/13/2022
ToyotaTundra
Had my mechanic install, they had to cut a hole in my Tundra front skid plate so we could have continuous access to the oil filter. Can't remove the skid plate without removing the front hitch. Needed to get an 8 inch hitch extender to attach our Kuat bike rack. Used it several times and everything works well. Thanks, Chris.....
by: Jordan03/28/2018
2008 ToyotaTundra
Untested, thus 4 stars for the product. Fitment was perfect, although 20-45 min install goal is a bit lofty for an older truck that has been off-road and has some rust. New rig-easily achievable time windows.
etrailer gets 5 though. I liked that the shipping cost that is associated with the free shipping was applied to my expedited shipping. Shipped very quickly.
by: Michael 12/30/2023
Works well for the price.
25
145
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Does SnowBear Personal Snowplow for 2 Hitches # SB324-080 Come with Winch
- The SnowBear Personal Snowplow for 2" Hitches # SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.
view full answer... - Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?
- Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
view full answer... - Parts Needed to Mount Snow Plow to 2010 Ram 3500
- The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065.
If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup.
For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear
view full answer... - Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall
- The correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
view full answer... - Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep Liberty
- The Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121.
You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
view full answer... - Front Hitch Plow Recommendation for 2004 Jeep Cherokee with 2 inch Hitch
- For your 2004 Jeep Cherokee that has a 2 inch front hitch installed the SnowBear Personal SnowPlow part # SB324-080 would be a great option. This plow is 82 inches wide which is a good size for your vehicle and comes with everything needed to allow you to control it from inside the cab of your vehicle.
view full answer... - Snow Plow Recommendation for a 2002 Jeep Wrangler
- Actually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you.
I attached a review video for this plow for you to check out as well.
view full answer... - Recommended Snow Plow For A 1994 Jeep Wrangler
- I can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow.
We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT
view full answer... - Where Does Curt Hitch Tube Opening Sit on 2002 Jeep Grand Cherokee When Installed
- I was able to find a better picture that shows where the hitch opening of the Curt front hitch part # C31048 will be when installed on a similar Jeep Grand Cherokee as your 2002 model that I attached to this page. It basically just sits right below the front bumper. I also lightened up the picture you mentioned so that you can see where it's at on that picture as well.
view full answer... - Front Hitch and Snow Plow Recommendation for a 2003 GMC Envoy
- As long as you have a front hitch on your 2003 GMC Envoy like the # 31055 the snow plow part # SB324-080 will fit. It's a bit wider than most plows that would get used on a smaller SUV like the Envoy, but if you plan to upgrade to a full size truck eventually this would be a good plow to use.
You would be able to easily transfer it over to the Sierra when you needed too.
view full answer... - How to Determine if the SnowBear Plow # SB324-080 Would Block Headlights
- The blade height of the SnowBear Plow # SB324-080 that you referenced is 19 inches. Most likely your headlights will sit higher than this, but if you measure from the ground up 19 inches then you would know where the top of the blade would sit and whether or not the headlights would be blocked.
view full answer... - Replacement Spring for SnowBear 324-080 Snow Plot
- I have a solution for you, but the tension springs for a SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall # SB324-080 are not sold individually. However, the Replacement Spring Kit for SnowBear Snowplows # SB600-128 comes with 2 springs and the hardware needed to repair the plow, so you would be able to replace your lost spring and still have an extra spring on hand in the event of a future loss or break.
We do also have some other parts available for
view full answer... - Recommended Snow Plow and Front Hitch for a 2024 Chevy Silverado
- Yes, you can so long as your 2024 Chevy Silverado 1500 has a front hitch like the Curt item # C22NR. The SnowBear Plow for 2" Hitches item # SB324-080 mounts inside a 2" front hitch receiver.
The SnowBear item # SB324-080 is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control.
view full answer... - Snow Plow For 2003 Ford Ranger
- We do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
view full answer... - Snow Bear Plow Recommendation for 2008 Honda Ridgeline
- You may not be able to use the Snowbear plot part # SB324-080 on the highway but you could still transport it in your front hitch to your other driveway as long as the plow was up off the pavement.
You'd also need the front hitch part # 33328 installed on your 2008 Honda Ridgeline.
view full answer... - Can Draw-Tite Front Mount Hitch 65080 Mount Snow Plow
- Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
view full answer... - Snow Plow for a 2005 Honda Pilot
- We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work.
The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328.
This particular plow is 82" wide and 19" tall.
view full answer... - Snowplow and Front Mount Trailer Hitch for a 2015 Ford F-150
- Yes, I recommend the SnowBear 82 inch snowplow # SB324-080 for your 2015 Ford F-150. You will also need to have a front mount hitch installed, # C31083, to mount and use the plow.
I also recommend the off-road lighting kit for this plow, # SB324-127, for better visibility when plowing at night since plows have the tendency to block vehicle lights.
view full answer... - Recommended Snowplow for a 2020 Jeep Wrangler
- It sounds like you're looking for a snowplow setup for a 2020 Jeep Wrangler and if that's the case we have some great options. I recommend the SnowBear Personal Snowplow part # SB324-080 with Curt Front Mount Trailer Hitch Receiver part # C31086. The SnowBear plow has an 82" wide blade with electric winch that allows you to control it from inside the vehicle. The 2" hitch mount will make it easier to get the plow on and off the vehicle.
We do not carry ACI plows unfortunately.
view full answer... - Distance From Hitch Tube To Receiver of Draw-Tite Front Mount Hitch For 2020 Toyota Tundra
- I was able to get the measurements you were looking for of the Draw-Tite front mount hitch that fits your 2020 Toyota Tundra, which is the following:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
The hitch is similar to the Curt # 31198 in that it measures 3-5/8 inches from the hitch pin hole to the front of the crosstube, and 6 inches from the crosstube to the front of the hitch. We haven't had a chance to install either hitch on a Tundra, but I did add some photos for you
view full answer... - Availability of High Rise 2 Inch Trailer Ball For Moving Trailer With Front Mounted Receiver
- It sounds as if the Curt # C40034 high rise trailer ball is what you're looking for. This is a 2 inch ball with a 2 inch rise. The Curt # D-28 is a pretty long ball mount, the hitch pin hole to the closest portion of the ball platform is 8-1/4 inches, as shown in the provided diagram. You can measure from the hitch pin hole out to the closest edge of the bumper to see if the D-28 would provide enough clearance.
view full answer... - Mounting a Winch Plate and Front Mount Trailer Hitch on a 2007 Toyota Tundra 2WD
- I spoke with my contact at Curt and he stated that the Curt Front Mount Trailer Hitch, # 31198, will not sit flush with the bumper on your 2007 Toyota Tundra 2WD, but about 2-3 inches back. We offer the Curt Electric Winch Mount Plate, # C31010, that has three pin holes that will allow you to adjust the distance of the winch plate from the vehicle. The measurement from the furthest pin hole to the mounting plate is 8-1/4 inches. I have attached a picture showing these measurements. This
view full answer... - Do Factory Tow Hooks Get Reinstalled When Installing the Curt Font Hitch on a 2013 Toyota Tundra UL
- According to the installation instructions, the tow hooks should have been reinstalled when the Curt Front Mount Trailer Hitch Receiver, part # 31198, was installed on your 2013 Toyota Tundra Unlimited. I have attached a picture from the instructions that you can find on the product page for you to see. The mounting hardware is the OEM hardware that was used to hold the tow hooks prior to the hitch being installed.
view full answer... - Front Hitch Recommendation for a 2013 Toyota Tundra for Bike Rack
- Front hitches like the Curt part # 31198 which has been confirmed as a fit for your 2013 Toyota Tundra can be used for carrying bike racks but they really aren't an ideal solution as this can block headlights, air flow to radiator, and license plate visibility. But if this is your only option it can be made to work.
That being said, the Curt hitch # 31198 when installed on a similar 2014 Toyota Tundra had more than enough clearance for installing a bike rack without needing a hitch
view full answer... - Front Mount Hitch Receiver and Oil Changes for a 2012 Toyota Tundra
- Customers have stated that in order to change the oil on a 2012 Toyota Tundra with front mount hitch # 31198 installed they have had to either leave off the skid plate or modify it to avoid having to take it and the hitch off every time the oil needs to be changed.
The other front receiver option that fits your truck, # 65080, requires removal of the skid plate so it would not be an issue unless you wanted to keep the ski plate..
view full answer... - Distance from Bolt Hole Center to Center Left to Right on Curt Front Hitch # 31198
- The measurements of the Curt hitch # 31198 are 38-7/8 inches from side to side, 2 inches from front to back 1-7/8 inches from the mounting flange to the cross tube.
view full answer... - Does Curt Front Hitch # 31198 Have to be Removed to Change Oil in 2007 Toyota Tundra
- With the Curt front hitch part # 31198 installed on your 2007 Toyota Tundra you will have to remove it every time you need to change the oil.
view full answer... - Front Hitch and Winch Recommendation for a 2014 Toyota Tundra
- The Curt Front Mount Trailer Hitch Receiver # 31198 is the correct front mount hitch for your 2014 Toyota Tundra, for a winch mounting plate you would want the # C31010. The hitch is rated for 9,000 lbs.
For an entry level 9,500 lb winch I would recommend the Superwinch Tiger Shark Series Off-Road Winch # SW1595200.
For a much quicker winch that will feed the wire cable in almost twice as fast I would recommend the Superwinch Talon Series Off-Road Winch # SW1695200.
view full answer... - Front Hitch for 2017 Toyota Tundra TRD Pro for Use with Hitch Motorcycle Carrier
- We offer Curt front-mount hitch # 31198 for your 2017 Toyota Tundra TRD Pro. It is rated for 500-lbs vertical load and 9000-lbs line pull. It installs without drilling using included hardware and will require either removal or trimming of the skid plate.
Instructions are linked for you along with an install video for the Curt hitch and a helpful general article on hitch installations.
Please note that the 500-lb vertical load limit means that the combined weight of your motocross
view full answer... - Front-Mounted Hitch Receiver for 2017 Toyota Tundra 4X4
- We can offer you a choice of two 2-inch front-mounted hitches for your 2017 Toyota Tundra. You can see both the Curt and Draw-Tite options by clicking on the link provided.
Both Curt hitch # 31198 and Draw-Tite hitch # 65080 share 500-lb vertical load and 9000-lb line pull ratings. Both are no-drill installations using included hardware. The Curt has the advantage on price so I suggest this one over the Draw-Tite. Installation instructions are linked for you.
If you plan to use a
view full answer... - Front Mount Trailer Hitch for a 2018 Toyota Tundra with Technology Package
- According to Curt, the Curt Front Mount Trailer Hitch Receiver part # 31198 is a confirmed fit for all models of the 2018 Toyota Tundra even ones with the technology package like yours. The hitch is very easy to install and will give you a 2" receiver tube opening. It will however require a slight modification to the factory skid shield as you can see in the attached photo.
If you can tell me what you will be using the hitch for I would be glad to provide some additional recommendations
view full answer... - Recommended 7 to 8 Inch Hitch Extender that Fits Best on Curt Front Mount Trailer Hitch # 31198
- The Curt Front Mount Trailer Hitch Receiver # 31198 referenced in your question has a length of right at 2-1/2 inches from the center of the hitch pin hole to the outer edge of the receiver.
I went out to our warehouse to take a look at the 7 to 8 inch hitch extenders we have available. I found that the closest extender we have available to fitting flush against the 2 inch receiver on your vehicle is the Brophy Hitch Extender # HE06. From the center of the hitch pin hole to where the
view full answer... - Does Front Skid Plate have to be Removed to Install Front Mount Trailer Hitch on 2006 Toyota Tundra
- The Draw-Tite front mount hitch # 65031 requires removing the front skid plate for installation. See instructions and video links I have linked for this hitch.
On front mount hitch # 31180 you should not have to remove the skid plate. The 2001 model we installed it on did not require removing the skid plate and the installation instructions make no reference to removing it. I have linked the instructions and a video showing a typical installation of this hitch as well.
view full answer... - Skid Plate Removal and Ground Clearance w/Front Mount Trailer Hitch Installed on 2007 Toyota Tundra
- You do not have to remove the skid plate on your 2007 Toyota Tundra to install Curt front mount receiver # 31198 but you can if you wanted to. You should be able to loosen the skid plate enough to move the skid plate out of the way enough without having to remove the entire hitch.
I have linked the installation instructions for you to view. The receiver will be just below the lowest trim piece on the front bottom of the vehicle to give you an idea of ground clearance. I included a picture
view full answer... - What Bolts are Used to Install the Curt Front Mount Trailer Hitch Receiver # 31198
- The Curt hitch part # 31198 that you referenced, which is a confirmed fit for your 2011 Toyota Tundra, installs with the factory tow-hook 12 mm bolts that the truck already has. Basically you remove the factory tow hooks, place the hitch between the frame and the tow hooks and then reinstall the hardware.
view full answer... - Will Front Hitch Need to be Removed for Maintenance on 2017 Toyota Tundra
- No you will not have to remove the Curt Front Mount Trailer Hitch # 31198 from your 2017 Toyota Tundra to do maintenance.
The only thing you need to do is enlarge the access hole to 4" - as shown in the linked installation instructions - to allow for oil filter changing.
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Test Fit:
Randy B
Test Fit:
Shane H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Matthew E
Updated by:
Isabelle B
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
2/2/2024
Thats so great to hear! Give us some updates on your next trip!