Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8219ELT,31180
Retail:$2,580.72
Our Price: $2,408.62
You Save: $172.10
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219ELT
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Wireless remote control lets you operate plow from the warmth of your cab
- Internal clutch prevents damage caused by overextension of actuator
- Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 82" wide x 19" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Weight: 265 lbs
- 1-Year limited warranty
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8219ELT Detail K2 Elite Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31180
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31180 Curt Front-Mount Trailer Hitch Receiver
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219ELT
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31180
Average Customer Rating: 4.8 out of 5 stars (58 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Joshua09/29/2019
2005 Toyota Sequoia
Picked this up from etrailer for a great price, so i can put a hitch-mounted winch on the front of our race tow vehicle (and perhaps use it to get the trailer into tight spots). As always with etrailer, it was delivered quick (and free!). One of the arms was just slightly bent (perhaps from shipment) so I had to whack it a couple times with a heavy hammer to get the holes to line up, but after that it fit perfectly. The little "fishing" tool included is extremely handy for installing the two bolts that need to come from inside the frame of the truck.
All in all, quality is great and this particular one fits with my factory skidplate/splashguard with a small amount of trimming with some metal shears.
PS - we also have stuff from etrailer on the rear end. Highly recommend anything you buy from etrailer!
by: Kevin McN.08/26/2015
My hitch arrived quickly and my mechanic installed it in 1.5 hours for me a few days later. The factory skid plate fits nicely with 2 holes cut as a modification. His only concern is he will now have to use hand tools instead of his air tools on some bolts holding the skid plate at oil change time. But no big deal at all.
I keep a 16 foot boat in my warehouse and maneuvering room is very tight. The door is narrow and there is a building across from my door that leaves very little room to maneuver my truck in. With my new front hitch I put the boat in the warehouse in less than a minute the first try.
The front hitch makes it easier in 2 ways:
1) visibility-you can see what you are doing. You are closer to your work and you are looking straight at it.
2) with the trailer closer to the front wheels you can do things in tight quarters that just can't happen working with the rear hitch. Using the rear hitch the front of your truck would hit the wall of the opposite building.
My only regret is not getting this ten years ago. I recommend a front hitch to anyone who needs to maneuver a trailer in tight spaces.
by: random guy11/14/2014
2005ToyotaTundra
Easy Installation on my 05 Tundra, can be used with the stock splash guard/skid plate. Bolts up nice and solid. All hardware is included. Uses 4 stock (pre-existing) holes in the frame and then you have two drill two more. You have to fish two bolts through the frame tube, but the wire fishing tool is included and it was much easier than I thought it would be. I had to do some minor trimming off the edge of the stock skid plate. This was easy I just cut a tab about 6-8 inched long with tin-snips and folded/rolled the tab in about 1/2 inch deep. This allows full clearance for the hitch and plate. You can install easily in about an hour. The tow loops are a nice addition. Overall very happy with it and worth the money.
by: Carlos02/20/2021
This thing is fantastic! My girlfriend and I put this thing together. It is perfect for keeping up with a storm. It is sturdy, takes a beating and keeps on going. I have a 2014 Ram ecodiesel. Would not use this plow setup for professional jobs however, only because it isn’t heavy enough to plow through mounds of snow covered ice. And when I say mounds, I mean 2 feet high and dense. Only drawback was shipping: I never received a tracking number from the shipping company but it did ship right away and was delivered in the time frame I was given. Enjoy guys!
by: Nick nak08/01/2018
2000 ToyotaTundra
It's rad...
Tiny more $than expected (was hoping for hundo vs 140$ in the end)
Fits with my bull bar I use for road protection and has proved itself - just had to cut a hole for the hitch...
by: Robert 10/29/2021
High quality receiver, both structure and finish. Routine install with a reasonable amount of effort. Still looks new after a year. Get's little use as a front end "Pusher" hitch but I really like having that capability when things get tight. Delivery was very prompt as well. Overall excellent buying experience.
Robert
10/30/2022
No change. Still looks and works like new.
by: Rich 10/20/2023
Easy to install, looks good, I like the large tie-downs. I use it for my front winch and just pulling things around.
by: Peter M.05/02/2013
This is the second hitch I have ordered from etrailer and both hitches went on "without a hitch" (I couldn't resist). Instructions were direct and easy to follow.
Congratulations etrailer on delivering as promised---very much appreciated in this day and age. Great crew and good team work. Thank you!
Peter M.
5/6/2014
Hi Patrick,After one year of extensive use through a very harsh winter, the hitch is working beautifully. It is holding a diamond plate tool box with apps. 200ponds of camping gear. I still get a lot of comments and questions about it as it is mounted on the front. A lot of getting down to look under. One of the best additions I have made to my rig. Keep up the great work at having us improve our rigs!
by: Nick 05/28/2020
2004 ToyotaTundra
I installed this unit on a 2004 Toyota Tundra 2WD SR5 4 door with no issues. I dropped the front skid plate thinking it would be in the way but ended up putting it back on when I realized it was not an issue. The install took about 1.5 hours and would have been quicker had I just left the front skid plate alone. Make sure you have some good 1/2 bits for drilling out those front holes. The 2 rear holes on each side are already there. Make sure you understand how to use the fish wire tool for installing the front bolts on each side. Love the product.
Nick
5/29/2021
It is working great. We mainly use it for securing a scooter on camping trips.
by: Thomas 03/14/2024
Fit perfectly. Easy install (2 holes to drill). Longest part of project was fishing the bolts through (need new glasses maybe!).
by: Blake07/15/2022
I ordered a Curt front mount trailer hitch for my Toyota Tundra. The product was shipped as advertised, but when I received it I tried to mount it on my pickup. The holes were far from lining up. I discovered that one of the mounting arms was badly bent (probably warpage from welding) and should have never left the Curt factory. I documented the issue with pictures and sent them to etrailer then spent significant time straightening the warped arm because I had immediate need for the hitch. etrailer refused to go back to Curt about their poor quality and refused to provide the requested discount after I saved them the cost of shipping 2 ways and the hassle of dealing with a defective part. Poor customer service…
by: Doug E09/06/2017
2003 ToyotaTundra
Very good construction. Easy to install after I bought a large break over bar to remove the bolts on existing tow hooks. Had to trim the skid plate a little to clear and now requires a box wrench instead of a socket to remove skid plate when doing an oil change. But overall not a bad installation job and I like having this on the truck for the occasional winch operation, front mount spare tire when I have the trailer, or using a cargo carrier on the front.
by: HUGO05/08/2013
2001 ToyotaTundra
Fast delivery. Well made hitch. Front mounted to my Tundra so I can place my boat trailer precisely. I also intend to use it for a cargo carrier when towing my camper. Video was helpful when installing it. Overall happy with the product and service.
by: Mark03/23/2018
2003 ToyotaTundra
Very nice hitch. Fits my 2003 Toyota Tundra perfectly. I had someone else install it but could have done so myself very easily. It was not necessary to remove the mud shield under the engine. I bought this in order to be able to move boat trailers, RV's etc. around without having to try to crane my neck around! It takes a lot of the work out of launching a boat and/or getting the RV in that tight spot!
Buy with confidence from etrailer.com!
Mark
3/23/2019
It still functions as expected. Ive moved several small trailers and even a 19 RV with it. I havent needed any other accessories for my truck but if/when I do, I know where to get em!
by: Ira R08/30/2013
2004 Toyota Sequoia
experienced excellent service and the front mount hitch bolted in as promisesd. All bolt holes matched those on my Toyoto Sequoia's frame.
Ira R.
8/31/2014
After one year of utilizing my Reece front mount hitch I am yet very well pleased with the equipment. Utilizing it for backing boat and other trailers , especially over longer distances , curving paths and tight places is much safer and easer. And I have routinely used the mount for securing a 12,000 pound winch when on hunting trips. Would highly recommend this mount to anyone for such purposes.
by: DavidM08/23/2016
Ford Transit Connect
The hitch is pretty much as advertised and as expected. Delivery was fast as usual.
One minor issue was that when I tried to install it, the holes in the hitch didn't line up with the ones on the truck chassis, so I called etrailer to find out what was going on.
The representative I spoke with knew exactly what had happened, and as it turned out the hitch "wings" were bent inwards a little, perhaps from the unit having been dropped at some time or another, quite probably in transit.
Rather than return it and wait for a replacement I was able, at the representative's suggestion, to squeeze them apart enough with a bottle jack and a piece of 2 x 4 so they lined up, and all was good after that.
This is the third hitch of one kind or another we've purchased from etrailer. All have been exactly as advertised.
Good products, good prices, efficient shipping and good friendly service. What's not to like?
by: John S.08/30/2016
Honda Pilot
I could not be more pleased with this front mount hitch. I use this hitch to mount signs and height clearance poles on the front of my Pilot Truck (oversize load escorting). Hitch was easy and straight forward to install.
by: Ron K.09/09/2013
2005ToyotaTundra
After some thinking and studying I found etrailer by accident. I was needing a front receiver hitch to carry my jack and bicycles on my truck when I have my camper on. I used the etrailer web page to find the exact part my truck needed, I mean exact. Then they had a video to show me how to do it. After watching the video I was confident I could do. I also had all the tools I needed to install it. From start to finish It took about an hour. I had to trim my skid plate with a angle grinder and a dremel but that was super easy to do. I was amazed that it was so easy, stunned actually. Fishing the bolt through the frame was so easy I laughed as I was doing it! The info help with the videos was the key to my purchase. The fast delivery was the seal on the deal. I am a loyal etrailer customer and I plan to tell my friends. Face book here I come.
by: perfect fit and function08/11/2014
2005ToyotaTundra
I Love love etrailer products and install info!! Got this for my tundra and install went perfectly! I did trim the metal skid plate on both side near the hitch mount so it would be easy to remove with the hitch still in place. watched the video and install went as shown. Complete written instructions and all hardware are included in well packaged box. Thanks again E trailer !!
by: Eric05/11/2018
2006 ToyotaTundra
I was able to install this in about twenty minutes, it fits perfect, and seems to be very quality.
by: Theodore W03/11/2018
The Curt front hitch arrived yesterday, less than a week after ordering. Installing the hitch was easy. Removing and trimming the skid plate was the hardest part but not bad, my skid plate is steel. I installed hitch by myself, being it’s quite heavy I used a floor jack to lift hitch into position, very easy, just go slow, be very careful until the first bolts are fastened. Also when drilling holes for the third bolt make sure holes are a full half inch to make fishing bolts through them easier. Very satisfied with hitch, makes moving my camper , utility trailer and boat very easy. Should have installed a front hitch years ago, Thanks for another etrailer product.
by: Peter M.05/02/2013
This is the second hitch I have ordered from etrailer and both hitches went on "without a hitch" (I couldn't resist). Instructions were direct and easy to follow.
Congratulations etrailer on delivering as promised---very much appreciated in this day and age. Great crew and good team work. Thank you!
by: John S11/01/2012
Love my new Curt Front Mount Trailer Hitch Receiver. The instructions were very clear and with the help of a friend I installed it in less than 30 minutes. It fit perfectly and the fit and finish are excellent. The front hitch will make it so much easier to park my boat at home since I must make a 90 deg turn and back it into a narrow driveway with culverts and other obstacles on each side. I will also now be able to EASILY maneuver it into the back yard if needed for longer term storage. Something I could never have done by backing in with my long wheelbase pickup. It was well worth the investment for me and you can't beat etrailer.com for the excellent price and fast shipping!!
by: Timo07/01/2011
This hitch is very well built and finished. If you're like me and you want to keep the factory skid plate, this kits design allows for that. I initially installed the hitch right over the skid plate, however it's a better ides to remove some of the flange (about 6"X3/4" along each side of the plate) to allow for removal of the skid plate without removing the hitch.
Easy installation. Even the maneuvering of the added bolts was a piece of cake.
Easy installation. Even the maneuvering of the added bolts was a piece of cake. " />
by: Jim M10/17/2019
This has been a wonderful addition to my truck. We have to travel a narrow hillside lane through timber to get to our hunting ground. This device has made it very easy to pull limbs or trees out of the lane as there is no room to turn around. Mounting was not a big problem and I also think it looks great!
25
58
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Does The Front Fascia Need to Be Cut For The Support Arms On Detail K2 Snow Plow For Front Receiver?
- Chris, while you could cut out the lower valance with 2 additional openings for the Detail K2 Elite Snowplow # K2AVAL8219ELT to fit the Front Receiver # C31078 on youur 2023 Ford F-250. A better option may be to simply remove the valance when you use the plow. Then you could simply reattach the valance after you are done using the plow. There are only screws holding the valance to the bottom of the front bumper.
view full answer... - Best Snow Plow For 1999 Ford Explorer
- I recommend getting the Detail K2 Plow as they are very popular and reliable for many years of use. Both will need this front trailers hitch receiver # C31051. If your 1999 Ford Explorer is 4 wheel drive, you'll need this kit # K2AVAL8219ELT and if you have a 2 wheel drive version you'll need this one # K2AVAL8219. Both function the same.
view full answer... - How is the Blade Lifted/Lowered on the Detail K2 Avalanche Elite Snowplow for a 2002 Jeep TJ
- The Detail K2 Avalanche Elite Snowplow part # K2AVAL8219ELT has a 82" wide x 19" tall which is raised and lower via an electric motor which is attached to a set of chain links. In order to use this on a 2002 Jeep TJ you will need the Curt Front Mount Trailer Hitch Receiver part # C31028.
view full answer... - What Are the Loops on the Curt Front Mount Trailer Hitch 31180 Receiver Used For
- The tow loops on the Curt Front Mount Trailer Hitch Receiver part # 31180 are recovery points that you can hook a tow strap to like part # EM59700 and pull yourself out with if you ever get stuck. They are rated for 9,000 lbs each just like the receiver tube. If you don't want to use these tow loops then we have the Curt Forged Tow Hook part # C45500 which will allow you to use the receiver tube opening to pull yourself out with.
The other option you have is to install a front mount
view full answer... - Do the Front Holes Have to Be Drilled to Install Trailer Hitch in a 2006 Toyota Tundra
- To install the Curt front hitch part # 31180 in your 2006 Toyota Tundra will require you to drill the two holes closest to the front of the vehicle on the trailer frame. I can't recommend you skip this step otherwise the warranty of the hitch would be voided.
I attached an install video for you to check out as well.
view full answer... - Is Drilling Required to Install a Front Mount Trailer Hitch on a 2006 Toyota Tundra
- When installing the CURT Front Mount Receiver, # 31180, on a 2006 Toyota Tundra, you will need to drill a total of two 1/2 inch holes. I have included a link to the installation instructions for you.
The other hitch we have for your truck, # 65031, also requires drilling. I have included a link to the instructions for this hitch as well and a link to a video showing a typical installation.
view full answer... - Front Mount Trailer Hitch Recommendation for a 2004 Toyota Tundra
- For a front mount hitch for your 2004 Toyota Tundra, there are 2 options, see link. Both of them are going to require drilling, trimming, and/or removal of the skid plate for the hitches to fit properly.
I would go with the Draw-Tite hitch, # 65031 because it has a high vertical line pull at 500 pounds. Vertical line pull is like the tongue weight rating on a hitch that would be on the back of the vehicle. It is the amount of downward force the hitch can handle.
Though the hitch can
view full answer... - Can Skid Plate of 2002 Toyota Tundra be Left On With Curt Hitch 31180 Installed
- We have had a few customers come back with similar Toyota Tundras as yours who said that with some minor trimming they were able to reuse the stock skid plate and have the Curt hitch # 31180 installed.
I attached a picture that shows the hitch installed with the skid plate installed as well.
view full answer... - Does 2006 Toyota Tundra Factory Skid Plate have to be Removed to Install Front Mount Hitch # 31180
- I spoke with my contact at Curt about Front mount hitch # 31180 for the 2006 Toyota Tundra. He stated that the skid plate does not have to be removed, but there is some trimming of the plate that will need to be done in order to install the hitch. I have included a link to the installation instructions for this hitch below.
view full answer... - Can Skid Plate of 2000 Toyota Tundra Be Removed with Curt Front Trailer Hitch Installed
- If you look at the installation video of the Curt Front Mount Trailer Hitch Receiver # 31180, you can see how the hitch will be in the way of removing the skid plate on your 2000 Toyota Tundra. In order to get the skid plate off you will need to remove the hitch as well.
When you remove it a hitch it is always recommended to replace the hardware, part # RHK
view full answer... - Recommended Front-Mount Hitch And Snowplow For 2004 Toyota Sequoia
- The Curt Trailer Hitch, part # 31180 you came from will work great with a snowplow on the front of your 2004 Sequoia. This hitch has a 2-inch receiver opening.
If you are looking for a more versatile plowing system you can check out the Detail K2 Rampage II Snowplow, part # K2RAMP8219. This plow features 5 blade angles for plowing. The great thing about this plow is the remote control that lets you raise and lower the plow as needed from the warmth of your driver seat. No hi8tch is
view full answer... - Can Replacement Hardware be Ordered for Curt Front Hitch 31180
- Yes, we offer replacement hardware for all of the trailer hitches we sell with the part number # RHK. You'd need to enter the part number 31180 on the product page and select Curt from the drop down menu and hit add to cart.
view full answer... - Fitment of Skid Plate With Curt Front Mount Trailer Hitch Receiver on 2005 Toyota Sequoia
- The Curt Front Mount Trailer Hitch Receiver, # 31180 on your 2005 Toyota Sequoia requires the skid shield to be removed if one is installed. Feed back from others has stated that they have chosen to trim some material from the skid plate for better fitment when reinstalling.
Please note the linked installation instructions and an installation video of this being installed on a 2001 model year vehicle.
view full answer... - Will Curt Front Hitch # 31180 Fit 2004 Toyota Sequoia
- The Curt Front Hitch, part # 31180, is a fit for your 2004 Toyota Sequoia. This hitch has an easy, no-weld installation and is designed to be a specific fit for your Sequoia. This 2 inch receiver hitch can accommodate several accessories like a spare tire carrier, a winch, or a snowplow.
You always want to follow the vehicle manufacturers recommendations for weight capacity when installing a hitch.
We also carry a rubber cover, part # C22272, for this hitch. This keeps debris out
view full answer... - What is the Width of Curt Front Mount Trailer Hitch 31180 for a 2006 Toyota Tundra
- I spoke with my contact at Curt and I have some measurements on hitch # 31180 for you. For the mounting holes, they are 34-3/8 inches apart on center, side to side. The width between the mounting brackets is about 31-3/8 inches. I have included a picture showing the measurements. I have also included links to the installation details and a video showing a typical installation for you.
view full answer... - How To Tow 2001 Toyota Tundra Behind Motorhome
- We can help you get set to tow your 2001 Tundra behind a motorhome, you will need to use a tow dolly such as the Roadmaster Tow Dolly with Electric Brakes, # RM-2050-1.
What you have is a receiver hitch used for attaching a ball mount to connect to a trailer. What is used on the front of vehicle for towing behind a motorhome, referred to as "flat towing" is something very different. I linked a help article below that walks through all the needed equipment and their purpose.
From
view full answer...
Info for these parts were:
Video Edited:
Zack K
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video by:
Joshua S
Test Fit:
Nicholas E
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joshua H.
9/30/2020
Working out fine. Ive used it a few times for various things, and it still looks brand-new no rust or visible wear. Overall still very pleased with the price and quality.