bing tracking image

SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: SB324-080,31313

Retail:$2,676.53
Our Price: $2,568.36
You Save: $108.17
Snow Plow

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
part number: SB324-080

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.

Features:

  • Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
  • Electric winch allows you to easily raise and lower plow
  • In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
    • Includes a wireless remote control as an alternative to the toggle switch
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
    • Manual release handle is easily accessible from front or back of plow
  • Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Skid shoes let you adjust plow height to prevent blade from digging into the ground
  • Strong rubber deflector allows for better visibility by directing snow away from your windshield
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Rugged and durable, all-steel construction
  • Black powder coat finish provides corrosion resistance
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver
  • ISO certification ensures consistent, quality manufacturing
  • Assembly required


Specs:

  • Application: 2" x 2" front trailer hitch receiver
  • Blade dimensions: 82" wide x 19" tall
  • Height adjustment: 9"
  • 3 Blade angles:<>
    • Left 22 degrees
    • Straight ahead
    • Right 22 degrees
  • Winch lift capacity: 3,000 lbs
  • Weight: 315 lbs
  • 1-Year limited warranty


Notes:

  • Due to the size of this item it ships via truck freight.
  • Bottom of 2" receiver tube must be 13" from the ground.

This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.


Simple, Hitch-Mounted Installation

HITCH MOUNTING

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Easy Lifting with Electric Winch

WINCH

The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.



324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31313

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 350 lbs
  • Gross trailer weight: 3,500 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31313 Curt Front-Mount Trailer Hitch Receiver





Customer Reviews

SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31313

Average Customer Rating:  4.7 out of 5 stars   (61 Customer Reviews)

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Mike07/25/2023

This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.



by: Chad04/25/2023
2010 ToyotaTacoma

Work great, was easy to install, instruction that it came with weren't great, but video online helped. Going to use it for a bike rack and Winch. There was some scratches on the hitch when I received it, I think you need to rethink you packaging, putting metal on metal and wrapping it Saran wrap just doesn't keep it from rubbing, I will have to touch it up. Thanks for the fast shipping.

Etrailer Expert

Katrina B.

5/10/2023

Awe, I am sorry that it arrived in that condition. I would recommend using a rust-oleum type of paint to prevent any corrosion.



by: Gregory10/29/2020

I need to thank the team @ eTrailer. The original front hitch for my Tacoma that I ordered was out of stock for a few months (Covid), and I needed the hitch for a trip in a week and a half. The eTrailer team had a different manufacturers brand at my door step in 2 days. I assembled the parts in my living room to make sure I had all the hardware, and exactly where all the bolts/washers will go. I cant wait to install it tomorrow. eTrailer had the best price I could find and delivered me the part in a very tight timeframe. eTrailer for the win!!!

Gregory

11/1/2021

Perfect. I attach a cooler and rod rack to the front of my vehicle for fishing. The rack is constantly loaded to and from the trailer hitch. After a year of abuse, its still not rusting I was pleasantly surprised. The trailer hitch on the back of the vehicle that came on the vehicle from the factory had rust by now on it. I would recommend.



by: Mike H07/19/2015
2008 ToyotaTacoma

My front hitch for my 2008 Tacoma got to me within 3 days very fast service. I installed it in 30 minutes and was able to put the front skid plate back on without doing any other changes to it. Very good product. I will be using it to put my rod rack on front of truck to use it at the outer banks of North Carolina for surf fishing this coming fall. Thanks for a very good hitch.

Mike H.

7/21/2016

The hitch has worked really well for me. My rod rack that I use hitch for was esay to install and remove. Very good product.



by: Kent 06/17/2023

Works great to make a tricky turn pushing my boat into the garage. Much better visibility and maneuvering than trying to back up.

Kent

6/20/2024

Works great? Very helpful for putting boat into my garage which requires a 90 degree turn.



by: Nathan05/20/2018
2006 ToyotaTacoma

Installed the Curt front hitch on a 2006 Tacoma. Install time was approximately 45 minutes by myself - very straight forward installation; instructions were very clear. I did not have to remove the skid plate. I was concerned that the hitch would be low, but it sits higher than the lowest point of the skid plate.
Primary use will be to mount a bike rack when pulling a travel trailer. Does the job perfectly!
Customer service was above and beyond. I ordered this on Wednesday afternoon and it arrived Friday afternoon! Box arrived in good shape, hitch and all hardware were in perfect condition.



by: John12/20/2023

It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.



by: Mitchell R12/12/2018
2009 ToyotaTacoma

Just got my front receiver hitch today got it put on took me about 45 minutes to an hour to get it installed. etrailer really got this delivered quick. Thanks etrailer!!



by: Bill11/17/2023

The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!



by: Greg T.04/19/2015
2005 ToyotaTacoma

Super fast delivery! Double boxed for security. Completed straight-forward installation by myself in about 40 minutes using routine hand tools (3/4" & 11/16" wrenches).



by: Jonathan 09/11/2018
2006 ToyotaTacoma

Fit great!! Easy to install with some simple wrenches and sockets. Took approximately 45 min to mount. It arrived in 3 days and was packaged appropriately!!



by: John05/25/2024

Standard curt hitch, should last about 5 yrs as the previous one did



by: Michael 12/30/2023

Works well for the price.



by: Jennifer 01/20/2021
Honda Ridgeline

I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.



by: scott04/12/2019

Added this hitch a yr ago - orginal intent was to install a bike hitch rack on front ( works great as long as it is day time! Bikes distort headlights do much so not as good as I was hoping. Second note it did save my front end in September when a deer decide it want to play chicken and jumped out in front of me- ended up cracking my bumper but pretty sure (don't ask) that the hitch prevented it from destroying my entire front grill- so certainly paid for it self then. Lastily it is really convenient for moving my trailer around when parking it- its short and kept in a really tight spot so being able to just push it in instead of backing it in makes it so much easier.



by: Rex A12/30/2020

it's worked fine so far. Have used it to move my trailer and when not doing that I have my winch mounted on it which is the main reason I got it. super strong and looks good.

Rex A.

12/31/2021

very happy still using winch on it



by: Daniel 08/19/2023

Fit, works, reasonably priced.



by: Steve05/10/2019

Works exactly as stated and provides a nice 2” receiver style hitch on the front end of the truck! I would have preferred a more discreet under mount but knew prior to install that it would be as pictured. I use mine with a hitch-mounted winch so that I can pull from both front and rear, depending on situation! No complaints and I would buy again!



by: Bill 04/19/2020
2006 ToyotaTacoma

The front hitch makes it easy to push my off-highway teardrop trailer through a gate at an angle and into a storage shed. The hitch came with complete instructions for my 2006 Toyota Tacoma. I was able to install with no assistance. I used a floor jack to position the hitch, and the process took me 45 minutes .



by: 76Nole10/17/2018
2009 ToyotaTacoma

I am not an automotive person. I was very leery about attempting this project. I called etrailer to confirm that I had selected the correct hitch receiver. Customer service was very helpful and I placed my order over the phone. I was told that there might be a delay in shipping due to back order. I received update emails and the product arrive earlier than promised. Installation instructions are clear, an online video is available. Installed hitch receiver on my 2009 Toyota Tacoma by myself. No exotic tools required. I would not hesitate to purchase from etrailer again. Oh, great price too!



by: Ken C. 07/23/2019
Toyota

Great hitch, solid construction, fits perfectly, great value. This is actually the third Curt front mount hitch that I have bought and installed on my Toyota pickups over the years.



by: Nathaniel09/11/2021
2014 ToyotaTacoma

I had self inflicted doubts about this product but Ashley was professional and timely in setting me up with a technician wor was able to direct me for proper installation.



by: andrew r tacoma 200901/07/2013
2009 ToyotaTacoma

i had looking for a front mount trailer hitch for my 2009 toyota tacoma came across the web page ordered the unit with no problems it showed up a few days later due to the weight of the hitch it was delivered by ups with the box completly busted open but no damage so who cares. i installed it today very nice install very straight forward i am planning to customize the skid plate along with my front light bar to fit on the hitch took about an hour to install. the unit is overbuilt for what i need it for. more than enough to hold my front mounted cooler and rod holders for surf fishing photos to follow> will buy from this company again,and again, thanks again andrew r milton mass



by: Eric M05/09/2014

Easy to install. Even able to put by bull bar back on. Strong and sturdy. The striper are going to dread seeing me pull up.

Eric M.

5/9/2015

Still like brand new



by: Timothy02/27/2020

etrailer has been a great!!! They have been updating me on all the shipments.


25
61
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Does SnowBear Personal Snowplow for 2 Hitches # SB324-080 Come with Winch
  • The SnowBear Personal Snowplow for 2" Hitches # SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.
    view full answer...

  • How to Determine if the SnowBear Plow # SB324-080 Would Block Headlights
  • The blade height of the SnowBear Plow # SB324-080 that you referenced is 19 inches. Most likely your headlights will sit higher than this, but if you measure from the ground up 19 inches then you would know where the top of the blade would sit and whether or not the headlights would be blocked.
    view full answer...

  • What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?
  • I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is
    view full answer...

  • Recommended Front Mount Hitch for Attaching Snow Plow to 2004 Jeep Grand Cherokee
  • We do indeed offer a front mounted hitch for your 2004 Jeep Grand Cherokee. You'll need the Curt # C31048. Once the front mount receiver is in place, you'll have the mounting point for a snow plow like the SnowBear # SB324-080. If you click the provided link, you can see the installation instructions for the hitch and the plow.
    view full answer...

  • Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall
  • The correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
    view full answer...

  • Where Does Curt Hitch Tube Opening Sit on 2002 Jeep Grand Cherokee When Installed
  • I was able to find a better picture that shows where the hitch opening of the Curt front hitch part # C31048 will be when installed on a similar Jeep Grand Cherokee as your 2002 model that I attached to this page. It basically just sits right below the front bumper. I also lightened up the picture you mentioned so that you can see where it's at on that picture as well.
    view full answer...

  • Parts Needed to Mount Snow Plow to 2010 Ram 3500
  • The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065. If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup. For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear
    view full answer...

  • Recommended Snow Plow For A 1994 Jeep Wrangler
  • I can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow. We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT
    view full answer...

  • Snow Plow For 2003 Ford Ranger
  • We do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
    view full answer...

  • Snow Plow for a 2005 Honda Pilot
  • We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work. The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328. This particular plow is 82" wide and 19" tall.
    view full answer...

  • Snow Bear Plow Recommendation for 2008 Honda Ridgeline
  • You may not be able to use the Snowbear plot part # SB324-080 on the highway but you could still transport it in your front hitch to your other driveway as long as the plow was up off the pavement. You'd also need the front hitch part # 33328 installed on your 2008 Honda Ridgeline.
    view full answer...

  • Front Hitch Plow Recommendation for 2004 Jeep Cherokee with 2 inch Hitch
  • For your 2004 Jeep Cherokee that has a 2 inch front hitch installed the SnowBear Personal SnowPlow part # SB324-080 would be a great option. This plow is 82 inches wide which is a good size for your vehicle and comes with everything needed to allow you to control it from inside the cab of your vehicle.
    view full answer...

  • Is Bumper Modification Required to Install a Front Mount Hitch on a 2003 Dodge Durango
  • We have front mount trailer hitches available for the 2003 Dodge Durango as long as it is a 4WD model. At this time there are no front mount hitches available for the 2WD models. If you have a 4WD model, then I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions
    view full answer...

  • Snow Plow Recommendation for a 2002 Jeep Wrangler
  • Actually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you. I attached a review video for this plow for you to check out as well.
    view full answer...

  • Can Draw-Tite Front Mount Hitch 65080 Mount Snow Plow
  • Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about: - Draw-Tite Front Mount Trailer Hitch Receiver # 65080 This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
    view full answer...

  • Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?
  • Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
    view full answer...

  • Replacement Spring for SnowBear 324-080 Snow Plot
  • I have a solution for you, but the tension springs for a SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall # SB324-080 are not sold individually. However, the Replacement Spring Kit for SnowBear Snowplows # SB600-128 comes with 2 springs and the hardware needed to repair the plow, so you would be able to replace your lost spring and still have an extra spring on hand in the event of a future loss or break. We do also have some other parts available for
    view full answer...

  • Recommended Snowplow for a 2020 Jeep Wrangler
  • It sounds like you're looking for a snowplow setup for a 2020 Jeep Wrangler and if that's the case we have some great options. I recommend the SnowBear Personal Snowplow part # SB324-080 with Curt Front Mount Trailer Hitch Receiver part # C31086. The SnowBear plow has an 82" wide blade with electric winch that allows you to control it from inside the vehicle. The 2" hitch mount will make it easier to get the plow on and off the vehicle. We do not carry ACI plows unfortunately.
    view full answer...

  • Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep Liberty
  • The Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121. You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
    view full answer...

  • Will Curt Front Trailer Hitch 31313 Fit a Base Model 2-Wheel Drive 2007 Toyota Tacoma
  • Curt front mount trailer hitch # 31313 fits all models of the 2007 Toyota Tacoma. There should not be any interference with any of the truck components since the hitch sits out in front of the ends of the frame and in front of the bumper beam as shown in the instructions I have linked for you. Even though it isn't much fun, try not to accelerate into any ditches! You may also be interested in the winch mount # C31010. I have linked a video on the mount and a picture showing the winch
    view full answer...

  • Can Skid Plate on 2008 Toyota Tacoma Be Reinstalled after Installing Curt 31313 Front Receiver
  • If you'll look at the provided customer review by Mike H, you'll see that he was easily able to reinstall skid plate after the Curt # 31313 Front Mounted Receiver was installed on his 2008 Toyota Tacoma. No modifications were needed. I've linked to the installation instructions for you.
    view full answer...

  • Does Front Hitch Install on 2015 Toyota Tacoma TRD Require Removal of Skid Plate
  • Normally the skid plate can reinstall after the front hitch part # 31313 is installed but on the TRD models the skid plate is different and can't be.
    view full answer...

  • Front Mount Receiver Trailer Hitch for a 2010 Toyota Tacoma
  • The Curt front mount receiver, # 31313, is a front mount receiver. You can also call it a trailer hitch even though it is at the front of the vehicle and not the back. As far as installation notes for this hitch, I show that no drilling is required or cutting of anything at the front of the truck for installation. The only modification is that the bumper end caps will have to be removed. I have included a link to the installation instructions for you. We have not yet had the chance to
    view full answer...

  • Will Curt Front Hitch 31313 fit 2008 Toyota Tacoma?
  • The Curt Front Mount Trailer Hitch # 31313 is a confirmed fit for all models of the 2008 Toyota Tacoma. I checked with Curt to make sure and the hitch will fit on base models. Two wheel drive models of the Tacoma may require some drilling and all 2007 and newer models will require the front skid plate being removed, though that will be the only difference in terms of installation. I've attached the installation instructions for you to take a look at as well.
    view full answer...

  • Front Mounted Hitch For 2009 Toyota Tacoma With Skid Plate
  • For a front mounted hitch that fits your 2009 Toyota Tacoma, go with an option from Curt: - Curt Front Mount Trailer Hitch Receiver # 31313 I like Curt as they have, in my opinion, a deserved reputation for overall quality, and it's what I would go with on my '09 Tacoma. The skid shield is not mentioned in the directions, but per customer feedback we know that some have not had to remove it at all, but those who did have been able to put it back on; I've added a cut out showing
    view full answer...

  • Is Skid Plate Removal Required to Install the Curt Front Hitch part # 31313
  • You should be able to reinstall your skid plate after installing the Curt Front Hitch # 31313. On the older models (prior to 2007) the skid plate isn't required to be removed. The newer ones after 2007 do require the removal of it, but we had a customer with a 2012 model write us a review where he said he was able to reinstall his skid plate. Without knowing what year your vehicle is it's hard for me to give you a more specific answer than that.
    view full answer...

  • Front Hitch Installation On 2011 Toyota Tacoma
  • I contacted Curt on your behalf and they confirmed for the Curt Front Mount Trailer Hitch Receiver # 31313, the side carriage bolts should be replaced with the installation kit bolts and there shouldn't be plastic fittings to remove there. For 2 wheel drive model Tacomas however there may be a need to drill the holes from the bottom up - reference the diagram on page 1, (TYP) (2WD Only) in the instructions for these specific holes. If that is where you're referring to then there will
    view full answer...

  • Fit of Curt # 31313 Front Mounted Recevier on 2011 Toyota Tacoma
  • The Curt Front Mounted Receiver you mentioned, part # 31313 is indeed a fit for the 2011 Tacoma. If you'd care to see the installation instructions, simply click the link I've provided.
    view full answer...

  • Does Skid Shield have to be Removed to Install Curt Front Mount Trailer Hitch on 2011 Toyota Tacoma
  • The skid shield may need to be removed to install Curt front mount trailer hitch # 31313. It might also be possible to trim it. The instructions do not mention the skid plate at all, see link to the right. You should not drill into or weld to the hitch so if the lights can attach another way then it is possible to secure them to the hitch. Take a look at the picture of the hitch installed that I have included to get an idea of how much space there is after installation.
    view full answer...

  • Best Front Hitch and Plow Recommendation for a 2015 Toyota Tacoma
  • The Curt Front Hitch part # 31313 that you referenced has been confirmed to fit your 2015 Toyota Tacoma so I would recommend it for you. For a snow plow I would recommend the K2 # K2AVAL8219 because of how well it works and how easy it is to use.
    view full answer...

  • Installation of a Front Mount Trailer Hitch on a 2010 Toyota tacoma
  • The Curt Front Hitch for the 2010 Toyota Tacoma, item # 31313, is the correct front mount trailer hitch for your 2010 Toyota Tacoma. The reference to removing the front skid plate on 2007 and newer models is a requirement for installing the hitch and the skid plate will not be reinstalled. When installed the receiver will be bellow the front bumper. A couple of handy accessories you might want to consider with the front receiver hitch are the Curt Trailer Hitch Electric Winch Mount Plate,
    view full answer...

  • Installing a Front Mount Hitch on a 2008 Toyota Tacoma
  • I read through the instructions for this front mount, linked below, and you do not have to remove the OEM tow hooks. Provided the bumper cover and trim is the factory or OEM body, you will not have to cut, trim or remove any of the fascia.
    view full answer...

  • Removing the Skid Plate to Install Curt Front Mount Reciever 31313 on a 2008 Toyota Tacoma TRD
  • On each end on the bumper of your 2008 Toyota Tacoma there is a little plastic cap that covers a bolt. These caps are removed to loosen the bolts for installation of the Curt Front Hitch, # 31313. You are correct that the front skid plate will have to be removed as well. I have included a link to the instructions below.
    view full answer...

  • Will Curt Front Mount Hitch Fit 2010 Toyota Tacoma With ARB Bumper
  • Without having the vehicle with the bumper installed to check, and with no instructions available for your ARB bumper, it is not something I can confirm. Based on the brackets I can see on the ARB it looks like the bumper and the Curt # 31313 would interfere with each other. The ARB bumper does appear to sit higher so I don't think clearance wouldn't be an issue. What you can do is compare the instructions attached below to your vehicle to see if you would be able to install it using
    view full answer...

  • Dimensions For Curt Front Mount Trailer Hitch # 31313
  • The Curt Front Mount Trailer Hitch Receiver # 31313 has a length of 38.81 inches from outside edge of bracket to outside edge of bracket at the longest point. I've attached a photo to help. This hitch is a confirmed fit for 2005-2015 Toyota Tacoma trucks and is a strong hitch with 9,000 lb line pull rating and 350 lb tongue weight rating.
    view full answer...

  • Replacement Mounting Hardware For Curt Front Mount Trailer Hitch Receiver # 31313
  • You will need to order our Replacement Hardware Kit # RHK. When placing your order you will need to put the hitch item number # 31313 in the appropriate box to ensure you get the mounting hardware for your exact hitch.
    view full answer...

  • Front Trailer Hitch Receiver That Will Allow For the Skid Plate To Mount On a 2008 Toyota Tacoma
  • I do have an option that will allow for you to still have your skid plate on your 2008 Toyota Tacoma as with the Curt Front Mount Trailer Hitch Receiver # 31313 mounted to the front of your Tacoma the skid plate must be permanently removed and not reinstalled afterwards. The Draw-Tite Front Mount Trailer Hitch Receiver # 65070 will allow for you to reinstall the front skid plate after the receiver has been installed. I do recommend using a Draw-Tite QSP Trailer Hitch Silencer and
    view full answer...

  • Will The # 31313 Trailer Hitch Fit A 2008 2 Wheel Drive Toyota Tacoma
  • The two confirmed front hitch fit options you have to choose from for the 2008 Toyota Tundra include Draw-Tite Front Mount Trailer Hitch Receiver # 65080 or Curt Front Mount Trailer Hitch Receiver # 31198. Both are high quality hitches that wil do the job but the Draw-Tite is my recommendation as it's stronger with a 500lb rated for the vertical load which is the tongue weight of the front mount hitch. This is the amount of weight the hitch can carry, and the line pull capacity is
    view full answer...

  • Removing Skid Shield to Install Front Mounted Receiver on 2014 Toyota Tacoma
  • To retain the skid shield, you'll want to go with the Draw-Tite # 65070. In order to install the Curt # 31313 front hitch on your 2014 Toyota Tacoma, the bumper beam end caps and the front skid shield would need to be permanently removed. For the 2006 and earlier model year, the skid shield could be replaced without modification. We've received comments from folks who installed the Curt front hitch on newer 2014 Tacomas and were able to retain the skid shield by modifying it, but I have
    view full answer...

Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Toyota Tacoma Accessories