Part Numbers: SS98GV,C31063
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out.
Features:
Specs:
Snowplow Installation
Front or rear mount? Versatility is the SnowSport LT's middle name.
Installation is quick and simple - just slide the included shank assembly into your 2" hitch receiver and secure with pin.
Once the plow frame is connected, attach the blade by lifting one end at a time onto the frame's holders. The lightweight aluminum blade construction makes lifting or adjusting an easy, one-person job. Secure the blade in either the transport or plowing position with the plow's snap pins. The low-profile design won't block your headlights, and the transport position is secure enough for highway travel.
If using with a rear-mount receiver, simply lower the blade to plow position and back up as usual. For a front-mounted plow blade, just drive forward with the blade in the plow position. The unique design takes the hassle out of plowing: This device has no hydraulics or complicated wiring. The push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.
When you are ready to reverse your driving direction, the blade lies back, skimming over the surface of the ground until you change direction again to plow.
Handy blade markers extend vertically from the ends of the plow to help you see where you are plowing.
With the SnowSport LT, plowing snow is as easy as backing out of your driveway. Once you are finished plowing, simply lift the blade, refasten it in the transport position and head off for work or errands.
California residents: click here
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31063 CURT Front Mount Trailer Hitch Receiver
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
We installed a front mount trailer hitch receiever on "grandpa's" truck for his Snowsport Utility Plow and it works GREAT! It's been a year and we expect it to last far past the life of the vehicle!
hitch connected up in less than an hour . The Etrailer gave you a handy little piece of wire which enabled you to fish the washers and bolts threw the frame . Without this piece of wire ,the job would have taken hours
I don't usually write reviews, but the installation of this front mount hitch on my 1999 Mazda B4000 was so simple and easy. I was so amazed at the ease of installation and the way it fits and looks I have to brag on it. I installed it the same day I got it in 1 hour with no help and no problems just followed instructions. The wire that was included for installing bolts is ingenious. I used two clamps to lift and hold it in place then enlarge two existing holes and wow the installation was finished. It is heavy duty and well built. I would give it 6 stars if it was allowed. I love it!
Front Hitch for my Ford 2009 Ranger. This is a solid hitch.
Duane S.
9/10/2015
The hitch is great and it is a solid product.
This front hitch my 2011 Ford Ranger XLT 4x4 fit perfectly and arrived so quickly. Had to remove a front guard, slightly widen two holes in the frame so the bolts would fit, and cut a little into the plastic bottom of the front bumper (looks fine). You can barely tell there is a front hitch when looking at the front. For a $65 install cost, I highly recommend using Uhaul or a professional who can install this well.
I recently bought front hitch for my 2008 Ranger. Hitch fit great and took about an hour to install. I plan on getting a winch for hitch install as it was hard to get a bumper replacement that takes a winch.
I was a little surprised with the snow plow. I thought it was going to be hydraulic/electric. It does okay, going on flat and slight declines. Inclines not so good. I also. Bought a rear trailer hitch. Very pleased with it.
The service at etrailer was amazing from start to finish. The product purchased works exactly as it was designed and described. Great experience the whole way through. I have been using this for a receiver mounted snow plow and it has showed zero signs of adverse wear or any issues.
instal instructions could be a lot clearer ,for a novice this could be a dificult install , fortunatly for me 25 years as a mechanic made it easier
Easy to order, fast delivery, easy inst allation!
Don
12/5/2022
Excellent!
This is one of the best companies
I have ever bought from very helpfull and fast shipping, great tech support,dont go anywhere else
This place is the best......Tom
Perfect fit on my 2011 Ford Ranger. The installation instructions spot on. I installed the hitch the same day that it was delivered. I will be ordering a snowplow for this front mounted hitch soon.
Fit perfect. Need a 3/4 metal bit to enlarge hole or a dremel tool... took me longer than they said because I broke a couple bits enlarging the hole. I didn't have a big enough drill bit.
Limited installation instructions other than that all is OK
Works like a charm! I have never been disappointed.
My product works great in the winter.
Nice sturdy hitch.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
George S.
10/20/2013
C31063 front hitch for ford ranger 4x4 extended cab.Will this fit my 4x4 ranger?George