Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Part Numbers: C24VV,C51322
Retail:$189.17
Our Price: $148.46
You Save: $40.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
part number: C24VV
Simple and compact, this proportional brake controller has an intuitive design that's easy to use. Includes a simple digital display, 10 gain settings, a pinch-trigger manual override, and built-in safety features.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking action
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Simple digital display shows you the braking and sensitivity settings as well as error codes
- Intuitive controls keep settings within easy reach
- 10 Levels of boost let you adjust initial braking power and aggressiveness for smooth, safe braking
- Pinch-trigger manual override allows you to control trailer sway or stop in emergencies
- Triple-axis, motion-sensing accelerometer provides highly responsive, smooth stops
- Automatically increases power when going downhill and decreases when going uphill
- Integrated safeguards protect your vehicle, the trailer, and the controller
- Runs continuous diagnostic checks to alert you to any potential problems
- Minimizes drain on car battery by entering sleep mode after 5 minutes of inactivity
- Keeps trailer brakes from overheating by reducing power output to them during prolonged stops
- Defends brake controller and trailer breakaway systems against shorts
- Prevents positive and negative power reversal with built-in polarity protection
- LED display shows power adjustments in 0.5 increments
- Brightness is adjustable for optimal visibility
- Compatible with ABS brakes, cruise control, low-voltage wiring, multiplex wiring, and PWM systems
- Automatic leveling lets you mount at any angle
- Mounting bracket and hardware included
- Plug-in, vehicle-specific brake control adapter (sold separately) can be used to reduce installation time on certain vehicles
Specs:
- Application: trailers with up to 4 axles (8 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Dimensions: 4" long x 3-1/8" wide x 1" tall
- Limited lifetime warranty
LED Display
The LED display on the TriFlex is large and easy to read at a glance. It will show you what setting the brake controller is on as well as give you information for troubleshooting. You can adjust the screen brightness or trigger night mode so it won't glare obnoxiously on your dash.
To change any of the settings, press the silver mode button on the front of the brake controller and which mode you are currently on will show on the LED display. When you're on the setting you want to adjust, use the black rocker switch next to the mode button to adjust it up or down.
Gain Adjustment
Gain control lets you set the maximum amount of power that will be applied to your trailer's brakes, adjusting in increments of 0.5. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to go as high as you can without the trailer brakes locking up. Typically, the gain is only readjusted when you experience changing road conditions or if the weight of your trailer changes. To get more power to your brakes, press the upper rocker switch. To decrease the gain, press the lower switch. When you make your adjustment, the gain setting will show on the LED screen for 10 seconds and then go into sleep mode.
Load Control
Once you have the gain set, you can fine-tune your braking by adjusting the load control on a scale of 1 to 9. This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. Load control can get the braking power to your trailer faster and with more intensity so that it doesn't push your tow vehicle forward. If your vehicle takes too long to come to a stop, increase the setting by pressing the upper rocker switch. If it stops too abruptly, decrease the setting by pressing the lower switch. You can alter the setting to suit your driving preferences or to improve handling based on changing road conditions or varied trailer loads.
Pinch-Trigger Manual Override
The TriFlex comes with a easy-to-reach, pinch-trigger manual override, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just push in the trigger. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Safety Features
The TriFlex offers key safety features to prevent damage to various components of your towing setup. This starts with built-in protection against shorts and positive and negative power reversal, as well as continous diagnostic checks to alert you to any potential problems as they come up. To minimize the drain on your vehicle's battery, the TriFlex will automatically go into sleep mode after 5 minutes of inactivity. Sleep mode will turn off again the moment you press the brake pedal.
Quick Installation
Automatic leveling means you can mount the unit at any angle. Your mounting options are limitless, so long as you can still easily access the controller and the manual override. The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all.
If your vehicle already has a plug-in brake controller wiring harness, just connect the unit to it. Otherwise, you will need to purchase a vehicle-specific wiring harness (sold separately) to plug into. If a harness is unavailable for your vehicle, hardwiring will be necessary.
Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required:
20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
See also etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Proportional Braking
The Curt TriFlex NEXT brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The TriFlex uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
51146 Curt Tri-Flex NEXT Proportional Trailer Brake Control
Replaces Curt 51140
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
part number: C51322
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from Curt
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 2' Long, 12-gauge wires have protective covering to deter damage
- Limited 1-year warranty
Installation of Curt Brake Controller Adapter
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness. For most applications, this harness is located beneath the dash, near the center console.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
51322 Curt Quick Plug Brake Control Adaptor Harness
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Defective
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional - C24VV
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - C51322
Average Customer Rating: 4.8 out of 5 stars (321 Customer Reviews)
Simple and compact, this proportional brake controller has an intuitive design that's easy to use. Includes a simple digital display, 10 gain settings, a pinch-trigger manual override, and built-in safety features. Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.by: Lee04/22/2024
Arrived as planed and was much smaller then my old clunky one. The custom cable harness was easy to install. Finding a flat spot to mount the controller took the longest to find the perfect spot. I gave a five stars because every was as it said. (Plug and play)
by: Thomas 05/19/2024
Excellent product. Easy install. Customer service was exceptional with real-time communications every step of the way. Highly recommend e-trailer for any of your trailering needs.
by: Mitchell05/20/2024
Josh was excellent in listening and helping discuss my options. The trailer brake improved my driving and safety tremendously with a 14k dump trailer. Thanks, Josh.
by: Loren 05/14/2024
Excellent product, easy installation just as described. Good quality as expected from E trailer.
by: Walter06/07/2024
All the information I needed was on your site. Got the correct adapter cable and was able to just plug in the controller.
by: Chris03/29/2024
The product I ordered was not available. There was a suggestion for another product, without the full knowledge that there are multiple other products, and I was only given one choice. It is what it is, if I knew of options, I would’ve made a different choice. Not a great company in terms of knowledge and service
by: Adam 02/07/2024
The control works great. The reason for knocking off a star is that the control rattles whenever there is a vibration in the truck. While annoying, it doesn't affect the operation.
by: Garth 02/23/2024
1997 Ford F-350 Super Duty
They are the best at what they do. They found the parts I needed and got them to me the next day. I appreciate the dedication to their customers. This product worked for my 1997 Ford F350 with the factory-installed tow package.
by: Eric P. Foxboro,MA07/16/2017
Everything was as described. Easy easy installation in 10 minutes. Not the top of the line controller but it's all I need. Very fast shipping as well. Couldn't be more happy with etrailer. I will be purchasing my fifth through etrailer soon!
by: Dennis 02/11/2024
I have not used this device yet but I have installed it. It looks kool. I hope installation orientation doesn't matter too much.
by: Dave K / NHS08/28/2017
Great job came on time. Installed easily. Works great. Better still is the service from etrailer. New what I needed for my truck. Deserves repeat business
by: Henry 03/15/2024
The service and speed of delivery has always been great, thank you E Trailer.
by: Dan 03/29/2024
Never a problem with etrailer
by: Nicholas06/27/2018
Plugged right in to my expeditions factory plug quick easy install.
by: Frank 04/20/2024
Extremely easy to install and small enough to not be in the way. Works great as well….highly recommend.
by: Mike05/28/2024
Scratched screen straight out of the package/from the factory. Haven't installed yet. Super fast shipping!!
by: Craig 05/14/2024
As advertised- very easy to install!
by: Shea06/17/2024
Easy set up, great customer service!
by: Diego 02/11/2023
Ford F-250 Super Duty
PERFECT. The etrailer.com employee (Roger R) that assisted me on my phone in order was fast, and efficient. He looked up my truck (2004 f250 diesel 4x4), and assisted me in ordering the exactly correct harness for my application. Plug and play. Thanks.
by: Matthew L.07/12/2017
Ford
Installation pics on my Ford F-150
by: Tom 04/09/2024
Was easy to install and works well.
by: Mickey 04/20/2024
Good ..except for shipping thru mail.
by: mike R.07/29/2013
Excellent. Perfect fit, exactly what was needed. Connected the Curt C51110 Brake control to factory wiring. Only thing that could make it better is if it came with someone to plug it in for me and save me 10 seconds.
by: Damon 04/09/2024
Couldn’t get any easier to install. Took less than ten minutes.
by: Chris 04/05/2024
Everything got here fast, and looks to be exactly what I need. Thank you!
25
318
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Recommended Trailer Brake Controller Harness for a 2023 Jeep Grand Cherokee
- In order to install a Curt trailer brake controller like the Curt TriFlex Trailer Brake Controller part # C24VV on a 2023 Jeep Grand Cherokee you'll need the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51446. In order to install a Tekonsha trailer brake controller like the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 you'll need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # TK93VR.
view full answer... - Parts Needed To Install a Trailer Brake Controller On a 2024 Hyundai Santa Cruz With Factory 7-Way
- To install a Curt TriFlex NEXT Trailer Brake Controller # C24VV on your 2024 Hyundai Santa Cruz you will need the Curt Custom Wiring Adapter # C77BR. This will provide you with a plug and play connection as long as you have the factory 7-Way # C68JR.
view full answer... - Will The Curt TriFlex Trailer Brake Controller # C24VV Work as a Replacement For Old Tekonsha?
- Yes, the Curt TriFlex Trailer Brake Controller # C24VV can be used to replace the Tekonsha controller in your 2002 Dodge Ram 1 ton pickup. I do recommend wiring in the Pigtail # C51515 so you will be able to easily disconnect the controller in the future. This will help in the event you have a wiring issue down the road or wish to move the controller to a new truck.
view full answer... - Recommended Plug and Play Adapter for a Curt Brake Controller on a 2019 Ram 1500
- For your 2019 Ram 1500 the Curt TriFlex NEXT Trailer Brake Controller item # C24VV can be installed with a plug and play adapter using the Curt Custom Wiring Adapter item # C51458.
The port you need is right above where your right foot would be covered in a foam tape. I have attached a picture below to help you find it.
view full answer... - 2000 Chevy C3500 Brake Controller Recommendation
- To add a brake controller to your 2000 Chevy C3500 I recommend the Curt TriFlex NEXT Trailer Brake Controller # C24VV which is a traditional style proportional controller that's backed by a limited lifetime warranty so it's really hard to beat the control and reliability of this controller.
For the wiring you'll need a 4-Way connector, like the T-One # 118315, as well as the Universal Wiring Kit # ETBC7. This comes with all of the wiring and connectors you need to get a fully functioning
view full answer... - Will Curt TriFlex Brake Controller Allow 2020 Ram 1500 Classic to Operate Brakes on Travel Trailer
- Yes, the Curt TriFlex Trailer Brake Controller # C24VV will work for your 2020 Ram 1500 Classic to operate the brakes on your Northtrail NBH24 travel trailer. You will need the Wiring Adapter # C51458 to plug and play the controller into your factory 7-way wiring.
view full answer... - How Can I Be Sure My Curt Triflex Brake Controller Is Working Worrectly
- Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller # C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain currently set at 9.7 which is why you are seeing this number flash on the display. So, it sounds like it is working correctly and there is no problem with the controller.
I suggest trying to turn the gain down. This way you can be 100% sure
view full answer... - Troubleshooting Trailer Brake Controller Circuit that Activates all of the Time
- You said that the brake controller output circuit was the number 2 circuit on your 7-way. If by that you mean the 2:00 position then you have the circuits flip flopped. The 2:00 position should be the 12 volt accessory circuit, not the brake output circuit. That would explain why you are getting 12 volts all the time.
The brake controller circuit should be the 5:00 position. Check out the diagram I attached to see how it should all get wired up.
view full answer... - Parts Needed to Install Curt TriFlex NEXT Brake Controller on a 2018 Ford F-150
- To install the Curt TriFlex NEXT Trailer Brake Controller # C24VV to your 2018 Ford F-150 I recommend also picking up the Custom Wiring Adapter # C51436 so the installation is a plug and play setup. You'll be able to find the OEM connector on your Ford behind the center console controls (see attached instructions).
If your F-150 came from the factory with a 7-Way connector at the back then you're good to go, otherwise if it came with the 4-Way then you also need the Universal Installation
view full answer... - Curt C24VV TriFlex Brake Controller Putting Out Minimal Voltage With Vehicle Brake Pedal Applied
- The Curt # C24VV Triflex is a proportional brake controller, which means that there are internal sensors that can determine how quickly the tow vehicle is stopping, at which time the controller will send the appropriate amount of voltage to the trailer brakes so the vehicle and the trailer will brake at the same rate.
When the vehicle is NOT moving, you'll get very little voltage out of the controller with the vehicle brake pedal, just enough so the controller 'knows' there's a trailer
view full answer... - Could Curt Triflex Cause Error Message on Dash of 2019 Ram 1500
- The Curt Triflex part # C24VV has a reputation unfortunately as having internal issues. If when the controller is installed it causes a dash error light I'd speculate that the issue is from the controller and I would suggest going with a different controller that is more reliable with the Brake EVN # TK63VR.
view full answer... - Parts Needed For Installing Curt TriFlex Trailer Brake Controller On a 2014 Toyota Tundra SR5
- Yes, the Curt TriFlex Trailer Brake Controller # C24VV and Wiring Adapter # C51362 will fit your 2014 Toyota Tundra SR5 as long as you have the factory 7-way. This will be a plug and play connection.
If you do not have the factory 7-way you will need the Universal Installation Kit # ETBC7 and a Wiring Adapter # C51515. This kit will allow you to connect a 4-way flat connector to the 7-way and provides the wiring needed to wire in the adapter for the brake controller.
view full answer... - Curt Brake Controller # C24VV on 2012 Honda Odyssey Showing OL Error Code
- The OL error code you mentioned indicates an short somewhere in the brake controller output circuit between the blue wire exiting the brake controller and the trailer connector. You can confirm this by severing the blue wire behind the brake controller, being sure to leave enough room to reconnect the wire. If this makes the OL code disappear, you have confirmed the short. If this is the case, you'll need to rewire the output circuit, using 10 gauge wire like part # 10-1-1.
Chances
view full answer... - Are Circuit Breakers Needed to Install the Curt Triflex Controller with the Wiring Harness # C51362
- Yes, when you installed the Curt Triflex Brake Controller # C24VV by using the Curt Custom Wiring Adapter # C51362 you took care of the installation completely. The circuits that are used on your vehicle wiring that the # C51362 connected to are protected with fuses so everything is good to go.
I attached an install video for the # C51362 for you to check out also.
view full answer... - Parts Needed to Install Trailer Brake Controller in 2018 Dodge Grand Caravan
- Since your trailer has electric brakes, you will indeed need to install a brake controller to actuate them. I'd recommend a proportional brake controller like the Curt # C24VV Triflex for safe, effective and predictable braking.
To install the brake controller, you'll need to begin with a 4 pole trailer wiring harness. You can provide one by installing # C56331. With the 4 pole in place, you'll install the controller using our # ETBC7 brake controller install kit. The kit includes every
view full answer... - Curt Tri-Flex Brake Controller Remains on Even When Trailer Is Not Attached
- This is completely normal and doesn't indicate any type of problems with the installation. Because it's connected to a constant 12-volt power source and responds to the brake light switch, the LED on the Curt TriFlex Trailer Brake Controller # C24VV will remain illuminated without a trailer connected and for a short time after the vehicle is shut off.
After 15 or so minutes of inactivity, the brake controller goes into a 'sleep' mode and will reactivate next time the brake pedal is
view full answer... - Troubleshooting Curt TriFlex Brake Controller that Flashes 1.0 With No Trailer Connection
- This is a common issue when there is corrosion built up on the brake output pin of the 7-way. What this does is cause the controller to sense a slight amperage draw which confuses it into thinking a trailer is connected. The other thing you can try is unplugging the controller and plugging it back in. Sometimes the Curt controllers just need to have a hard reset to function normally.
view full answer... - Will Curt TriFlex Trailer Brake Controller Work On 2020 Ram 3500 With Factory Brake Controller
- The Curt TriFlex Trailer Brake Controller part # C24VV is a fit for a 2020 Ram 3500 when used with the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51458 but you must take the truck to the dealer to have them flash the PCM. It will plug into a factory port under the dash.
If you don't want to worry about flashing the PCM you can use the Curt Echo Wireless Trailer Brake Controller part # C51180 which is plug and play and overrides the factory signal.
view full answer... - Troubleshooting Curt TriFlex Brake Controller Not Recognizing Trailer When Connected
- It sounds like there may be a damaged wire on your 2006 Dodge Ram 2500 Laramie. Since the Curt Triflex # C24VV only has the single red light we know the controller is getting power but with the 2nd red light not illuminating when connecting to the trailer the brake wire portion is not completing the circuit. You can use a Test Light # PTW2993 to check at the connector to verify if the damaged wiring is on the truck or trailer. Then you can move in either direction with the test light to
view full answer... - What Is The Difference Between Proportional and Time Delayed Trailer Brake Controllers?
- The Curt TriFlex NEXT Trailer Brake Controller # C24VV you are looking at is a proportional controller. This means when you press on the brakes the controller is going to have an inertia sensor which then factors in how quickly the vehicle is stopping and adjusts the amount of power going to the trailer brakes from your original setting. The easiest explanation I can give you is when you lightly press the brakes to slow down this controller will lessen the amount of power sent to the trailer
view full answer... - Will Brake Controller Plug-In Adapter C51322 Fit 2004 Ford Expedition And 2004 Ford E-350
- The Curt Custom Wiring Adapter, part # C51322 is designed to work with the # C74VV brake controller and will fit both of your vehicles if there is a factory trailer connector installed on the vehicle.
If you have a 4-way connector on either vehicle then you will also need part # 37185.
If your E-350 does not have a trailer connector you will first need to install a 4-way connector like part # 18252. You will then need part # ETBC7 to get a 7-way at the back of your vehicle. If there
view full answer... - Where is the Wiring Harness for a Curt Custom Wiring Adapter # C51322 on a 1996 Ford F-150?
- According to the instructional manual of the Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # C51322, the harness on your 1996 Ford F-150 is located underneath the dashboard near the center console. I went ahead and attached a photo to this answer that I highlighted that shows the location.
view full answer... - Can Curt Brake Controller Install on 2009 Porsche Cayenne
- For the 2009 Porsche Cayenne you can install a Curt brake controller like the part # C24VV but due to the complex wiring of your vehicle we don't have a specific fit harness for it. I attached a tech bulleting below that details everything that's needed to install a controller as well as a fitguide list for all the controllers that fit your vehicle.
If you had ran your vehicle through our fitguide you'd seen the list of controller and how they need to install. If you searched for brake
view full answer... - Wiring Harness For Curt Brake Controller on 2002 Ford F-350 Super Duty
- Yes the wiring harness for your 2002 Ford F-350 Super Duty is indeed the same Curt brake controllers.
The Curt brake controllers for your truck will use the Curt Wiring Adapter # C51322.
view full answer... - Brake Controller Installed on 2001 Ford Van Causes Turn Signal to Malfunction
- You are using the factory pigtail provided when you purchased the vehicle, not the # C51322, is that correct? If this is the case, the factory pigtail uses a different wire color code than the aftermarket ones, which match up color for color. Before proceeding further, lets make sure you have the pigtail wired correctly to the brake controller. An incorrectly wired harness or pigtail could cause the problem you describe.
Over the years, Ford has made two different factory pigtails, one
view full answer... - Curt Brake Controller and Wiring Adapter for 2015 Forest River FR3 30DS on Ford F-53 Chassis
- To use the Curt Assure Brake Controller # C49UR with your 2015 Forest River FR3 30DS, which was built on a Ford F-53 chassis, you will need the Wiring Adapter # C51322.
The other part you will need is Adapter # 37185 to give you 7-way on your motorhome.
view full answer... - Where is the Brake Controller Installation Plug on a 2000 Ford F-250
- The plug you're looking for on your 2000 Ford F-250 is likely located behind some of the wire looms or possibly even tucked away in a nook off to the side when you remove the dash panel, but it will be there somewhere. Once you find this plug you'll be able to use the Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # C51322 to install the Curt Tri-Flex # C74VV. I've linked a few installation videos of brake controllers that use a brake controller adapter plug so
view full answer... - Where is Install Connector on 2014 Ford Explorer for Curt Brake Controller
- The correct install harness for a Curt brake controller in a 2014 Ford Explorer is the part # C51322. The harness you are looking for on your vehicle will be under the dash to the center towards the center console.
I attached an install video that shows a different brand controller and harness installed in a 2013 Ford Explorer which will be the exact same process. Around the 10 minute mark is where the connector on the vehicle is found.
view full answer... - Brake Controller and Install Harness for a 2013 Ford Explorer
- For installing the Tri-Flex brake controller part # C24VV in a 2013 Ford Explorer the correct install harness is the part # C51322.
I confirmed this with Curt as a fit for your vehicle. he Ford Explorer and Mercury Mountaineer have 6-pin connectors behind the glove box on the passenger's side that this connector will install into.
view full answer... - Economically Priced Proportional Brake Controller Recommendation for a 2004 Ford F-150
- For a great brake controller at a great price I would recommend the Curt Triflex Brake Controller part # C24VV. This is a proportional brake controller that will sense how much braking power the tow vehicle is applying and will proportionately apply the trailer brakes to slow the trailer down in a smooth, effective manner.
To install the brake controller all you need is the correct install harness which would be the part # C51322. Check out the link to the install video I attached as well.
view full answer... - Is The Curt Wiring Adapter Compatible w/ Hayes Energize III Trailer Brake Controller For 1996 F-350?
- The Curt Wiring Adapter # C51322 is compatible with the Hayes Energize III+ Trailer Brake Controller # HA81742B. Both the Curt and Hayes Adapters # HA81783-HBC utilize the same connectors allowing you to use it on your 1996 Ford F-350.
view full answer... - Does Curt Brake Controller Install Harness # C51322 Fit 2000 Ford F-53
- Yes, for your 2000 Ford F-53 RV chassis the Curt brake controller install harness part # C51322 is a confirmed fit and would work well.
It would work really well with the Triflex part # C24VV.
view full answer... - Does Curt Brake Controller Install Harness # C51322 Fit 2007 Ford F-150
- The Curt brake controller install harness part # C51322 that you referenced is a confirmed fit for your 2007 Ford F-150.This adapter plugs into the port on your vehicle's built-in brake control wiring harness. For most applications, this harness is located beneath the dash, near the center console.
Most likely the mechanic you brought it to didn't know where to connect it.
This would work well with the proportional Triflex part # C24VV.
view full answer... - Parts Needed to Install a Brake Controller in a 1994 Ford Bronco
- Yes, to install a Curt brake controller like the TriFlex part # C24VV in your 1994 Ford Bronco all you would need is the correct brake controller install harness part # C51322 that you referenced.
Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
view full answer... - Recommended Curt Wiring Harness for Brake Controller on 2003 Ford Explorer
- To make your Curt Venturer Brake Controller # C74VV able to function with your factory tow package you simply need the wiring adapter harness. For your 2003 Ford Explorer Eddie Bauer edition, that wiring adapter is the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51322. On an Explorer that harness is behind the glove box on the passenger's side.
view full answer... - Wiring Harness for 2013 Thor Challenger With Curt Brake Controller
- For a Curt brake controller, the correct brake controller wiring harness for your 2013 Thor Challenger is the Curt Wiring Adapter # C51322.
view full answer... - Brake Controller Wiring Harness for a Curt Brake Controller on a 2014 Ram 1500
- If you are using a Curt trailer brake controller then for your 2014 Ram 1500 you will need harness # C51453. Harness # C51322 fits Ford, Land Rover, Lincoln, and Mercury vehicles. The new Rams have a unique multiplex wiring system called Powernet. Because of this new design it requires a special brake controller harness, # C51453, which will allow the Curt brake controller to function properly.
view full answer...
Info for these parts were:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Jonathan Y
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike R.
1/28/2015
The products worked great up until about a few weeks ago Thats when I sold the truck where the items were installed. lol. Really though, I very much liked how the products listed and purchased from etrailer.com were easy to find, fit exactly as described, and performed as needed. etrailer.com is always one of the first places I look when searching for items for my new truck.