Part Numbers: RED63RR,3064-P
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight with the included wiring harness. The Elite's user-controlled mode lets you respond to any weather or terrain.
Features:
Specs:
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your vehicle in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow vehicle's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Elite keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
The Redarc Tow-Pro Elite comes with a unique feature that lets you respond to any terrain or weather you meet while on the road. The user-controlled mode gives you direct control over your trailer's braking so you can have exactly the level of power output you need for any situation - perfect for off-roading or adverse weather conditions. In this mode, the Tow-Pro Elite will apply your trailer's brakes with the same preset amount of power each time you activate the brakes in your vehicle. Set the power low if you're towing through sand or mud so that the trailer doesn't stop with too much force and act as an anchor. When on a steep descent, set the power to a higher level to ensure that the trailer's momentum doesn't cause it to push against the tow vehicle.
To turn on the user-controlled braking mode, rotate the knob counterclockwise and apply your vehicle's brakes. Push down on the remote knob twice (2 times within 1 second) and release the brakes. The knob will turn green to let you know that the mode has been activated.
Unlike most proportional controllers on the market, the Tow-Pro Elite has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or having something in your cab that could interfere with your vehicle's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. A universal mounting panel is included to ensure a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Elite. Do not zip-tie the box to wiring or cables that can shift as you drive.
The included adapter connects the main unit to a vehicle-specific Tekonsha wiring harness for an easy plug-and-play installation. There's no splicing or hardwiring. Plug one end of the adapter into the wiring harness and the other into the Tow-Pro Elite and you're done!
For assistance in properly wiring the Tow-Pro Elite, please refer to the diagrams below:
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
The Redarc Tow-Pro Elite brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Tow-Pro Elite uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
This adapter plugs into the 5-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1707 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight with the included wiring harness. The Elite's user-controlled mode lets you respond to any weather or terrain. Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.This Redarc pro elite looks great in my 23 Subaru ascent; it looks factory. I mounted remote head in front of shifter(very easy to get at)where there was an empty blank.Mounted module to one of column support bracket in spot where it would not interfere with any adjustments of column. By far the longest part was modifying blank with dremel tool to perfectly accept remote head(45 min)(but worth going slowly and taking the tim)This was a completely plug-n-play install.this kit put together by etrailer came with all harnesses so all could be just plugged in; this is why I always use etrailer; I know they have already done the behind the scenes vetting of every product they sell. THANKS ETRAILER
Purchased a 22' R-Pod 192 TT to pull behind my 2019 Benz GLS450 with a factory tow package. It was equipped with the "green brake connector" located by the left kick panel. Contacted etrailer to help choose the correct combination of parts for my vehicle. Was suggested the Redarc EBRH-ACCV3-NA Brake Controller and a TPH-017 Wire Harness. Once products were received, still needed a harness from the green connector to the unit. Wrote to manufacturer in Australia and was told also needed etrailer part number 3066-P. Ordered. Now had everything needed. However, where to mount the switch? One individual with the same Benz mounted it next to the cup holders, but he didn't have a switch for the cold/hot--I did. There was no where else to drill a 1" hole. Got an L-bracket from hardware store and modified it to accommodate the switch. Mounted the main unit securely to the underside of the dash panel and used 3M Dual Lock tape to attach it--no holes to drill. Haven't had an opportunity to tow yet; however, did follow the instructions for the initial "learn" by driving and braking without a trailer attached. Been quite a challenge, but happy with the results and support from manufacturer and etrailer. Happy Camping!
I haven't had this brake controller installed yet, but it looks like it's fairly straight forward and easy to do, even for someone that's not very mechanically inclined. We'll see how it goes. I received the brake controller device and the wiring device in minimum time, very quick to arrive!!
I needed a harness adapter to move my Tekonsha brake controller from my old pickup to my new one. The customer service folks at etrailer quickly helped me with the exact one I needed and it was in my hands three days later, perfect fit and I’m up and running. Etrailer has been my go-to for all my trailering and RV needs hot several years and they’ve always come through!
I've installed 3 plug in Tekonsha adapters for 3 different vehicles and found them all to be to specifications making the installation a breeze
Got a new 2024 Silverado to replace our 2002 model. This plug is a perfect fit do I can use my Prodigy 2 in our new Truck. etrailer is my go to for all my towing needs
If you want to mount your controller at the center of your dash the harness will reach it but not long enough to hide wires under the dash,just to darn short
Next level of brake controller
Very easy installation in about twenty minutes. Connected effortlessly to both the brake controller and the truck wiring.
Clean installation
Came with everything I needed. Having videos on site is super helpful. Just need some videos on the newer vehicles to keep everything up to date but overall great site and excellent service.
work great for my application
Best brake controller I’ve had. Very easy to use and adjust
Product was delivered as expected. Very good. The reason for only two stars is that the control knob was broken. No LED lighting which apparently causes the whole unit to not function properly if at all. Customer service is supposed to be sending a replacement on emergency status. I hope this is the case as I’m supposed to picking up a new trailer on Tuesday 8/23/22 and a functional break controller is needed. My rating would be much higher had I not had this issue. Hopefully it gets handled right away and I have the replacement by Monday 8/22/22.
I installed this in a 2023 RAM Promaster 2500 159WB van with factory installed hitch. There wasn't much info on how to do this.
the controller has great reviews, I got it because my factory controller wasn't working well with the new camper that has electric/hydraulic brakes and I was experiencing a 5 second lag for the trailer brakes to come on. this controller works better with a 2 to 3 second lag, need to try a couple different combos on settings, have the boost at 3 (per recommendations) and gain at 2.5 and under hard braking it locks up the trailer tires. going to try boost on 2 and bump up the gain and see if that works better.
harness a little over priced. Could be a few inches longer.
Quality product. Easy install.
Jack
7/13/2022
Works good. Happy with the location where I put it.
Wow!! Our horses love it! Braking is so smooth now with our 45’ horse trailer.. wish we had this 10 years ago
Part of my 22 Bronco hitch installation process. Installed super easy. I watched the Chase Gentry video on [online] before hand, very helpful.
The wiring adapter came 2 days early and was easy to install.
Harold S.
1/19/2023
The brake controller is still working great after 1 year.
Got it hooked up in no time very simple haven’t tried it yet I am sure it will be what I want good product
The install was quick and easy looks good and works as advertised excellent product
Great selection and communication.
I had the Primus IQ trailer braking system in my 2018 GMC pickup. When I traded it in and got a 2021 GMC I needed to update the wiring harness The unit worked fine but the harness was different. So I ordered a new direct connect harness and it was simple as plug and play! The Primus IQ braking system works absolutely perfectly as I said all I needed to do was update the harness and I was able to move the trailer braking system from the 2018 to the 2021 GMC pickup. The installation of the whole thing took a matter of minutes. Very impressed with the braking system as well as the information given to me from etrailer on how to do it. A technical support staff and front office folks are very attentive and educated on the products that they sell. I'm a return customer many times over and appreciate all they do.
Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard T.
8/1/2023
The brake controller worked excellent, never a problem.