Agri-Cover SnowSport LT Snowplow for 2" Hitches - 82" Wide Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: SS98GV,C31023
Retail:$1,669.95
Our Price: $1,611.20
You Save: $58.75
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Agri-Cover SnowSport LT Snowplow for 2" Hitches - 82" Wide Blade
part number: SS98GV
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out.
Features:
- Lightweight, user-friendly plow allows for quick and easy snowplowing with no controls or hydraulics
- Self-adjusting plow frame allows up and down movement over rough terrain
- Safe for use on grass, concrete, gravel, brick and other uneven surfaces
- Practical design does not block headlights in either plow or transport position
- Effortless installation on the front or back of your vehicle
- Designed for use on 2" front or rear trailer hitches (sold separately)
- Durable construction
- Rust-resistant aluminum blade
- Long-lasting, heavy-duty rubber cutting edge
- Complete kit includes plow blade with blade markers, fixed 2" shank assembly, push frame, hardware kit, and interceptor
- Made in the USA
Specs:
- Application: SUVs, trucks, and minivans with a 2" front- or rear-mounted hitch receiver
- Must have 8" to 14" clearance under the receiver
- Overall blade dimensions: 82" wide x 14-1/2" tall
- Rubber cutting edge dimensions: 6" tall x 1" thick
- Blade weight: approximately 68 lbs
- Plow mounting frame: 31" wide
- Warranty:
- 1-Year for plow parts
- 3-Year for rubber cutting edge
Snowplow Installation
Front or rear mount? Versatility is the SnowSport LT's middle name.
Installation is quick and simple - just slide the included shank assembly into your 2" hitch receiver and secure with pin.
Once the plow frame is connected, attach the blade by lifting one end at a time onto the frame's holders. The lightweight aluminum blade construction makes lifting or adjusting an easy, one-person job. Secure the blade in either the transport or plowing position with the plow's snap pins. The low-profile design won't block your headlights, and the transport position is secure enough for highway travel.
How to Plow
If using with a rear-mount receiver, simply lower the blade to plow position and back up as usual. For a front-mounted plow blade, just drive forward with the blade in the plow position. The unique design takes the hassle out of plowing: This device has no hydraulics or complicated wiring. The push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.
When you are ready to reverse your driving direction, the blade lies back, skimming over the surface of the ground until you change direction again to plow.
Handy blade markers extend vertically from the ends of the plow to help you see where you are plowing.
With the SnowSport LT, plowing snow is as easy as backing out of your driveway. Once you are finished plowing, simply lift the blade, refasten it in the transport position and head off for work or errands.
80664 Agri-Cover SnowSport LT Snowplow for 2" Hitches - 82" Wide Blade
California residents: click here
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31023
Easily attach a variety of accessories to the front of your GMC Sierra with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your GMC Sierra
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31023 Curt Front Mount Trailer Hitch Receiver
31023 Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Video of Agri-Cover SnowSport LT Snowplow for 2" Hitches - 82" Wide Blade
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Front Mount Trailer Hitch Installation - 2013 GMC Sierra
Today on our 2013 GMC Sierra we're going to take a look at and show you how to install the Kirk custom-fit front-mount trailer hitch receiver. This offers a 2-inch opening. It's part number is C31023. Here's what our hitch looks like once we get it installed here on the front of the Sierra, really nice clean-looking hitch, beefs up the look of the front end a little bit. It doesn't protrude out pass the front edge of our bumper. That straight line would be about there, so we're going have maybe an inch and a half, 2 inches because it's tucked back in but it sticks out far enough that we've got plenty of access room for our pin hole. We've used all existing bolts, some to hold the tow hooks in, some for the bumper.
This is going to offer a 500-pound ton rating and a 5,000-pound gross trailer weight rating. You say, "It's on front of the truck. That doesn't mean a whole lot. I'm going to push my boat down the road or something," but from what we see in the reviews and what customers are saying for maneuvering your boat in those tighter spots, it can really comes in handy. Just hook it up to the front.
It gives you a good visual. You're looking right at it. You maneuver it right into those sometimes harder-to-get-to spots. Also, this is going to work out great for wrench recovery. Straight line pull, we put our wrench into here. As long as it's rated at those numbers, it's going to hold up to 9,000 pounds.
That gives us great recovery opportunities there. Also, other usage, you could get a cargo carrier to mount up here on the front, give you a little safari look. We've got snow plows that'll mount up here on the front so you can clear your driveway. The hitch offers a 5/8s inch pin hole here in the side. All the 5/8s hitch pin accessories are going to work with that whether it's pin-and-clip, anti-rattle bolt.
Then we've got the nice enlarged in here, so even the hitch immobilizer is going to go around there and block out whatever it is that we've got in place. Now a couple of measurements you may find helpful would be from the ground to the inside top edge of our receiver tube opening, it's about 12 inches. Then from the center of our hitch pin hole to the outermost edge of our bumper, it's about 3. Now to begin our installation, for a little bit of safety and also support for our bumper, we're going to use just a regular cam-buckle strap. We're going to feed it right into the large hole here. Behind is a metal bracket right up here. Then we'll bring it over to each side. We'll see in our bumper here, there's a small tab that's got a hole in it. We're just going to hook that into that side. I'll pull out a little bit of the slack. Then we'll get the other side hooked up. Now we'll just pull any slack in that strap out. Then as we loosen up a couple of the bolts that are holding the bumper into place, that'll give us some support so we don't have to worry about that coming down. Now we're going to start taking a few bolts out. This is the front lower fascia on the bumper. We're here on the driver's side. We remove this bolt and this bolt. Those hold our tow hook in. One there. Sometimes they come out freely. Sometimes you'll have to put a wrench on the nut that's on the back side there. You pull that out. Then remove that tow hook. Now while we're here, we're also going to remove the 2 bolts. One. Then that should push out together. Now let's head over to the passenger side and remove those same 4. We need to trim out just a little notch for that hitch to fit through. Now to find our center we need to look underneath here. Our 2 tabs here, we just want to measure the gap between them, about 2 and 3/8's. That's our center mark. Mark it on our tape. Now we'll just use a straight edge and just bring that up on our tape so we have a good idea. Next up we're going to find our top edge. Now we're going to come down from this intersection 7/8's of an inch. Now we're going to take out the gap here. It's going to be 2 and 3/4's of an inch. We'll do an inch and 3/8's on each side. All right. Now we're going to be taking out that section right there. Now we can take a look at the attachment points that we're going to be using. You've already had a real good look at them. They're going to be the bolts that we have removed. We've got our lower bolt, the side bolt. Those we're for our tow hook if you remember. Then just above those we've got our bumper bolts. Now we're going to use the factory hardware that we removed. We'll just get our hitch put up there, get a few of the bolts started and then get the rest of them in place. We're going to take the tow hook we removed. We're going to place it right back in. What we'll do is line up the hole that our bolt went through the nut that's on that tow hook. For good measure if you use just a little screwdriver up here in the front, you can see where I've got it. Just let the tow hook rest down on that. It's going to hold it into position until we get our bolt lined up into place. Now we can grab our hitch, raise it up into position and get our hardware started. Now with those started, that's going to hold our hitch into position for us. Let's go ahead, grab the rest of them and get those in. Now we will just torque that down to specification. We'll have this job taken care of. Now before we head down the road, let's get our cam-buckle strap out of here. It's done it's job. With everything torqued to specification, that's going to complete today's installation of the Kirk front-mount trailer-hitch receiver, Part Number C31023 on our 2013 GMC Sierra.
Customer Reviews
Agri-Cover SnowSport LT Snowplow for 2" Hitches - 82" Wide Blade - SS98GV
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31023
Average Customer Rating: 4.9 out of 5 stars (82 Customer Reviews)
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Bill M.03/14/2021
Install went perfectly. It all bolted up just how the instructions said it would. The hardest part was navigating your tools in the tight spaces. Having the deep sockets as suggested is definitely worth it. I was also able to utilize a cordless impact wrench and it helped a ton. This will work great for our bike rack.
by: Chris03/23/2024
2012 ChevroletSilverado
Delivery was super fast, instructions and instructional video was excellent. Installed my new part in less than 40 minutes
by: Brad S06/28/2017
ChevroletSilverado
Great front receiver hitch for my Chevy Silverado 2500 HD. Everything fit using OE bolts and nuts. Only the plastic trim had to be cut out to fit receiver. I had dealer do it, but would have done it myself when I was younger. etrailer is easy to order from and has good customer service.
by: Richard B07/08/2013
2013 GMC Sierra
Overall, my experience with etrailer was good. There was an initial delay in shipping, but once I talked to someone, everything went well. The help page was invaluable. The biggest help was the installation video. While there are slight differences between the 2011 GMC and the 2013, the process was the same. I am very pleased with the product and the support. Picture attached.
Richard B.
7/8/2014
After a year, I am still extremely pleased with the hitch. It is solid and provides the solution I needed.
by: A. C.04/18/2018
2012 GMC Sierra
Great product! Super easy to install! This makes my winch twice as versatile. Thanks for a design that leaves the tow hooks in the truck!
by: Jim 02/13/2024
2013 ChevroletSilverado
This thing went on our 2013 Silverado 1ton truck without a problem. It did take two of us to hold it in
Place to get the first bolt back in but other than that it’s been flawless
by: Mitch E.01/14/2020
Great product...I carry bicycles on the front of truck while towing a camper. Can also carry a cargo basket or winch on the front. Love it!
Mitch E.
1/15/2021
Best thing for carrying bikes on front of truck!
by: Chris z10/06/2019
Installed this hitch this morning 10/06/19. Was going to wait for help as arthritis in hands makes turn wrenches a chore but was bored so went ahead anyhow. This is my second front hitch install , first one on 2018 F-150. Today’s install on 2014 duramax 2500. Today’s install was super simple , used floor jack to hold hitch up in position, you need to remove four bolts on each side , I did try air tools on the 21mm bolts but not powerful enough so used small piece of copper pipe over wrench handle for leverage to loosen, air tools were able to loosen the six 18mm bolts , took me about an hour and a half by myself. The fit of the hitch was absolutely perfect! Had to cut a small piece of the air dam at bottom of bumper, used a hacksaw, very easy. The quality and coating on the hitch is top notch.
by: TomW203406/01/2016
2013 ChevroletSilverado
Excellent fit & function delivered in a reasonable amount of time. Although this shot is at our current campground in NJ, the hitch will be used to park my boat in its hard-to-get-to parking spot. Great job, Etrailer!
Tomw2034
1/23/2018
The hitch has worked out just fine for a variety of uses. I have always been impressed by all the _towing_ related articles purchased from etrailer.
by: Rodney06/12/2024
Works great
by: Owen W05/02/2017
2013 ChevroletSilverado
Great product, easy to install. Had to cut the air-dam but no other alterations needed. It is a little low but no more so than the front of the truck air dam.
Owen W.
5/2/2018
I use a motorcycle carrier on the front for my 125 scooter while pulling my fifth wheel. It is very secure and the finish has held up fine. I would recommend this purchase.
by: Brown09/18/2023
Perfect fit for my 2012 GMC 3500. Directions are excellent. It is a tight work space for some of the bolts. I've carried a bike rack with 130 lbs of ebikes for 600 miles so far and no problems.
by: Jerry B04/14/2017
2013 ChevroletSilverado
As always, delivery was quick. Hitch was easy to install and works nice. We do a lot of camping and since very few of the travel trailer manufacturers recommend a trailer hitch (some will tell you it voids your warranty), we can carry our bikes up front with this hitch.
Gerard B.
4/14/2018
Excellent! As with every product i have purchased thru etrailer.
by: Robert 10/24/2023
I watched the attachment on how to install and video was spot on. The hitch is very well made. I'll enjoy this for years to come. Thank you
by: John05/10/2020
Super easy, DIY!!! Best price around, delivered in 2 days for free! Would definitely look at etrailer again for any camping/ hauling / trailer needs !
by: George 03/21/2024
2013 ChevroletSilverado
Great product. Easy install.
by: Timothy11/14/2021
Fit and finish is great and installation was fairly simple with the right tools.
by: James10/04/2016
I was a little surprised with the snow plow. I thought it was going to be hydraulic/electric. It does okay, going on flat and slight declines. Inclines not so good. I also. Bought a rear trailer hitch. Very pleased with it.
by: C.09/24/2020
I ordered a front hitch mount for our RV. Product is very heavy duty and priced right! I ordered on a Friday afternoon and had my part by Tuesday, very impressed. Will surely use this company in the future.
C.
9/25/2021
The hitch mount has worked great. Knowing it was machined for pick up trucks, I had no problem installing on a Freightliner chassis. Had to drill a few holes and fabricated a additional brace out of some angle iron for added piece of mind. I have no concerns about the sturdiness and integrity when using this mount.
by: Ed C08/05/2019
Installed on my 2012 Silverado 2500HD and it fit perfectly and was very easy to install. Cut my lower cowling to allow the hitch to protrude and it looks awesome! Very glad I purchased your product and would highly recommend to everyone!!
Ed C.
8/6/2020
Still Rocking!I have used this many times and it is still a great product!
by: William07/24/2018
very sturdy product; installation was straight forward exactly as instructions indicated. I had planned to haul motorcycle on this front mount hitch with a carrier meant for a rear receive hitch. While i have not done so yet (lighting issues i need to resolve), this receiver will do the job. I also plan on picking up a receiver mount for a winch which could come in handy. Shipping was fast from etrailer. Overall great product and great service! I got just what I expected from the description.
by: Dave T.09/20/2015
Exact fit. Took less than 30 minutes to install in my shop and used all of the factory attaching hardware. If your truck is equipped with the second lower plastic deflector, approximately 3" long, you'll need to trim a 2 3/4" square out dead center for the tube to clear. I've installed several RV accessories over the years and I want to thank you for taking the time to get the fit correct. Time is money and your product is spot on. I would recommend this to anyone looking to install a hitch to the front of their truck for a bike rack or to make moving a trailer around in a crowded yard a breeze.
by: William05/13/2016
Honda
Front Mount Trailer Hitch works great! Use your 20x47 MaxxTow Cargo Carrier to carry my Honda Generator and misc. equipment. Traveled 9500 miles,16 states and the Canadian Rockies with no problems.
by: Russell 07/06/2021
2014 GMC Sierra
Perfect fit on my 2014 Sierra 2500HD Denali. Removed the air dam and it bolted right up. I use it for a front rack to haul a canoe with my 5th wheel camper and it suits my purposes perfectly. You do lose some front approach angle with the receiver hanging down up front, but if you don't do a lot of off road travel you wouldn't notice any difference.
25
82
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Will the Curt Front Mount Trailer hitch 31023 Fit a 2014 GMC Sierra 2500HD Denali
- I spoke with my contact at Curt who told me that front mount hitch # C31023 will fit the 2014 GMC Sierra Denali but because of the differences in the front fascia/bumper and air dam there may be some trimming required to get the hitch to fit. Once installed the receiver will exit below the front license plate. I have linked a video showing a typical installation for you.
view full answer... - Fit of Curt Front Mounted Hitch Receiver on 2013 GMC Sierra 2500 Series
- The Curt front mounted receiver you mentioned, part # C31023 is indeed a fit for 2500 or 3500 series GMC Sierra/Chevy Silverado trucks. I've confirmed this with Curt Manufacturing.
If you click the link I've provided for you, you can see an install video showing the front mount receiver being installed on a 2011 Sierra.
view full answer... - Availability of Front-Mount Hitch for 2015 Cheverolet Silverado 2500
- We offer several choices in a front-mount 2-inch hitch receiver for your 2015 Chevrolet Silverado 2500 that can be seen by clicking on the included link. I recommend the Draw-Tite # 65078 since it is the most cost-effective choice. This hitch installs without drilling and it includes the required installation hardware.
view full answer... - Better Visability When Backing Trailer With Front Mounted Hitch on 2012 Chevrolet Silverado
- Installing a front mounted hitch like Curt Front Hitch for the 2012 Silverado, part # C31023 on your Silverado would provide more visability when moving a trailer into position. It has a 2 x 2 inch receiver opening, and can also accomodate other accessories like winches, snowplow, and cargo carriers. This hitch has a line pull capacity of 9000 lbs and a tongue weight capacity of 500 lbs. This hitch has easy, bolt-on installation and requires no welding for installation, but does require
view full answer... - Front Hitch and Bike Rack for Front of 2012 Chevy Silverado 3500
- For a front hitch for your 2012 Chevy Silverado 3500 the Curt hitch part # C31023 is a confirmed fit and would work great for mounting a bike rack like the Swagman XC2 part # S64650 that you referenced. In this price range for a bike rack I like to recommend the Hollywood Racks # HR200Z as it costs about the same and is much more stable on the road.
If you check out the test course videos I attached you'll see how they both compare.
view full answer... - Front Hitch Recommendation for a 2012 Chevy Silverado 3500
- The only front hitch I can safely recommend for you 2012 Chevy Silverado 3500 would be one that is confirmed to fit your vehicle like the Curt Front Hitch part # C31023. I looked up the dry weight for your Suzuki Burgman and it would be too much for this hitch and any other front hitch available for your vehicle.
The # C31023 that you referenced has a tongue weight capacity of 500 lbs.
view full answer... - Comparing the Curt Front Hitch Part # C31023 and Draw-Tite Front Hitch for a 2012 GMC Sierra 2500
- The Curt Front Mount Trailer Hitch Receiver part # C31023 which is a fit for a 2012 GMC Sierra 2500 will hang down further than the other option we have for you which is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65078 excluding Denali. This means that there will be much less trimming required to clear the lower bumper valance in order to make it work.
Please note that the above hitch is only tested on stock vehicle's without a lift or bull bar. You will need to take a
view full answer... - Best Way To Move a Heavy Trailer In and Out of Parking Spaces
- I do have an option that will help you move your trailer in and out of parking spaces but both of the front mount trailer hitch receivers we have for your 2013 Chevrolet Silverado 2500HD, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65078 and the Curt Front Mount Trailer Hitch Receiver part # C31023 have a maximum vertical load of 500 lbs. The tongue weight of your trailer will exceed the maximum vertical load rating of either trailer hitch therefore, I cannot recommend using
view full answer... - Front Mount Trailer Hitch for a 2015 GMC Sierra 2500
- For a 2015 GMC Sierra we have Curt trailer hitch # C31071. I have included a link to a video showing an example installation for you.
view full answer... - Front Hitch Recommendation for 2011 Chevy Silverado 2500HD that Allows Tow Hooks to be Retained
- The Curt front hitch part # C31023 that you referenced does allow you to retain the front tow hooks of your 2011 Chevy Silverado 2500HD so it would be the better choice.
view full answer... - Recommended Front Mount Hitch for a 2011 Chevy Silverado 3500 HD 4WD
- Yes, the Curt Front Mount Trailer Hitch Receiver item # C31023 will fit your 2011 Chevy Silverado 3500HD 4WD. This front mounted hitch bolts to your Silverado 3500 with included hardware.
I have linked an installation video below and a picture that will show you what this hitch looks like installed.
view full answer... - Correcting Gap Between Hitch Mounting Bracket and Truck Frame for Curt # C31023 Hitch
- Sometimes during shipping hitches will bend slightly. It could have been that the mounting brackets of the Curt hitch part # C31023 got slightly bent and that is why you had a small gap between the bracket and the frame of the truck. Typically we recommend people use an open stairwell or a large vice to apply leverage to the brackets so that they can be bent back.
As long as the metal doesn't crease or paint doesn't flake off during either the initial bend or the bending back the integrity
view full answer... - Front-Mount Hitch Receiver for 2015 GMC Sierra 2500
- The front-mount 2-inch hitch you referenced, Curt # C31023, has been confirmed to fit 2011- through 2014 model years of the GMC Sierra 2500. But for the 2015 model year Sierra 2500 the correct front-mount hitch is Curt # C31071. You can see an installation in a 3500 by clicking on the linked video. All required hardware is included and no drilling is necessary.
view full answer... - Can Front-Mount Trailer Hitch Be Installed On 2013 Chevrolet Silverado With Grille Guard Installed
- The front-mount trailer hitches we offer for your 2013 Silverado require removing the tow hooks and then re-installing them after the hitch has been installed.
This same location is used by some of the grille guards we offer so you can check out the attached installation instructions for the Curt Hitch, part # C31023 to see if the grille guard you have would interfere with the hitch installation. Our manufacturers say they have not tested the installation of their hitches with the grille
view full answer... - Does 2011 Chevy Silverado 3500 have to have Tow Hooks to Install Curt Front Receiver C31023
- Your 2011 Chevy Silverado 3500 does not have to have the tow hooks to install Curt front receiver # C31023 but you will need the hardware for them. You can obtain the proper sized hardware locally if need be. Just make sure that the hardware is Class 5 or higher rated. I have linked a video showing an example installation for you.
view full answer... - Front Mount Hitch Fit for 2011 GMC Sierra HD Denali
- The Curt front mount receiver # C31023 is listed as a fit for the 2011 GMC Sierra 2500HD. Denali models are not excluded.
I attached an install video for this hitch on a 2011 Sierra very similar to yours as well.
view full answer... - Front Mount Hitch for a Snow Plow on a 2013 Chevrolet Silverado 1500 LT
- I would be happy to clarify. The Curt Front Mount Trailer Hitch Receiver item # C31023 fits a 2013 Chevrolet Silverado 2500 or 3500. This front mount hitch sits below the front bumper. I have attached an installation video.
For a 2013 Chevrolet Silverado 1500 LT you will want the Curt Front Mount Trailer Hitch Receiver item # 31322. This one mounts below the front bumper as well. I have also linked an installation video.
view full answer... - Will Curt Front Mount Trailer Hitch 31023 Fit a 2013 GMC Sierra 2500HD Denali
- The Curt front mount receiver # C31023 is listed as a fit for the 2013 GMC Sierra 2500HD. Denali models are not excluded. Installation will be nearly identical on a 2013 as in the video for the 2011. I have linked the video for reference. Even on Denali models, the front fascia trimming should be minimal. I have included a link to the installation details for you.
view full answer... - Front Hitch and Cargo Carrier Recommendation for a 2011 Chevy Silverado 2500HD
- The most popular front hitch we offer for your 2011 Chevy Silverado 2500HD is the Curt hitch part # C31023. Tech tips for this hitch are that the tow loops will need to be removed and reattached for hitch installation. Front bumper bolts will also be removed and reinstalled. Since this has more reviews than the other hitch we offer for your vehicle and they are higher as well I would recommend this hitch for you.
I attached an install video for this hitch on a very similar 2011 GMC Sierra
view full answer... - Will Curt Front Mount Trailer Hitch 31023 Fit a 2011 GMC Sierra Denali 2500
- The Curt front mount trailer hitch # C31023 does not exclude the Denali models of the 2011 GMC Sierra. However, because of the different front fascia on Denali models you may need to do some extensive trimming to install the hitch. On non-Denali models you would only need to trim a small area, see the instructions I have linked, but on a Denali model, more of the fascia structure would require trimming to fit. I have also included a link to a video showing a typical installation for you.
view full answer...
Info for these parts were:
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Test Fit:
Rick A
Test Fit:
Randy B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado Accessories
Product Experts Available Now!
Call 1-800-940-8924
Bill M.
3/15/2022
Love it. It is secure and discrete and is great for a bike rack. Be cautious of what you hang up front, bikes or other types of racks might disrupt airflow into the radiator, which was expected, just keep an eye on temperature. The bolt up was secure and relatively easy.