SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: SB324-080,31322
Our Price: $2,480.75
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meSnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
part number: SB324-080
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
- Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
- Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
- Electric winch allows you to easily raise and lower plow
- In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
- Includes a wireless remote control as an alternative to the toggle switch
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Manual release handle is easily accessible from front or back of plow
- Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
- Skid shoes let you adjust plow height to prevent blade from digging into the ground
- Strong rubber deflector allows for better visibility by directing snow away from your windshield
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Rugged and durable, all-steel construction
- Black powder coat finish provides corrosion resistance
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
- ISO certification ensures consistent, quality manufacturing
- Assembly required
Specs:
- Application: 2" x 2" front trailer hitch receiver
- Blade dimensions: 82" wide x 19" tall
- Height adjustment: 9"
- 3 Blade angles:<>
- Left 22 degrees
- Straight ahead
- Right 22 degrees
- Winch lift capacity: 3,000 lbs
- Weight: 315 lbs
- 1-Year limited warranty
Notes:
- Due to the size of this item it ships via truck freight.
- Bottom of 2" receiver tube must be 13" from the ground.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31322
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31322 Curt Front-Mount Trailer Hitch Receiver
Customer Reviews
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31322
Average Customer Rating: 4.7 out of 5 stars (101 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Mike07/25/2023
This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.
by: Peter12/18/2017
2013 ChevroletSilverado
The hitch came packaged in a double box. The outer box had some damage but the hitch did not.
I read the instructions, making sure i had the correct tools, and jacked my truck up.
The install took three hours as i was layiing on my back with simple hand tools.
The parts all fit and i am happy with the outcome. Good price, simple instructions, good fit.
by: Evan O.05/13/2015
2009 ChevroletSilverado
I bought the Curt front hitch for the purpose to haul my Honda Generator on the Torklift Lock and Load in front of my 2009 Chevy Silverado. The installation is self explanatory, but I still watched the video provided by e-trailer, and it made it that much easier to put in. Especially by myself. It works perfectly for the purpose I bought it for.
by: Jf Santos05/13/2023
Excellent product. Always pleased with Curt products. Quality built with easy to install video provided by etrailer. Shout out to Alex at etrailer for getting me the exact fit for my 2007 Chevy Silverado. Good job etrailer. Received with 4 days of order placement
by: Ryan M.06/08/2017
2012 ChevroletSilverado
This product fit my needs perfectly. I purchased this hitch to mount a bicycle rack to the front of my pickup truck as I did not want to add weight to the back of my camp trailer on the flimsy bumper that is standard, and did not want to spend a fortune on a hitch that needed drilled or welded to my camp trailer. I looked at several options, and this appeared to be the best choice. With the video instructions and an hour of time, I had this hitch installed and bicycle rack in place. This product was relatively easy to install, and will suit my needs very well. Thank you etrailer!
by: Dan05/06/2021
High quality product. Good instructions and all the necessary parts. Had to buy a 21mm socket and use a racket strap to pull stabilizing bar back a little to reach hole in frame but no big deal.
Dan
5/7/2022
After a season of plowing snow in Alaska my hitch is as good as new. It’s a lighter duty plow don’t still went through some abuse this last winter. No regrets on my purchase.
by: John12/20/2023
It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.
by: Joshua03/26/2020
ChevroletSilverado
Ordered for mounting a winch on the front of my Silverado.
Free shipping was appreciated and quite fast. Received it in 3 business days because of my location.
Instructions were included and simple.
Product was well protected and packaged great.
Installation went as well as expected. I had slight alignment difficulty due to a deer committing suicide via my truck this past fall, but that wasn’t the products fault. Took me just over an hour total from setting up to tearing down.
Good quality bolts make for ease of mind.
Overall highly recommend. Great company. Even followed up with an email to make sure everything was good.
Will purchase from then again when needed.
by: Gary in Iowa11/22/2023
ChevroletSilverado
I have a "new body" Silverado, so I had to return the first hitch and get this one. Even with the VIN, etrailer wasn't sure which one I needed. Once identified, the other was returned and this one was shipped fast (as usual). The video for the install help didn't include the big square hole "spacer", which must go along with the bolt inside the frame. This doesn't stop the bolt from spinning anyway, but it tightened up fine. I DID have to use a die grinder to open up the frame hole about 3/8". Nice hitch, for the new plow.
by: Bill11/17/2023
The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!
by: Jack 12/28/2023
2010ChevroletSilverado
Installed on my 2010 Silverado. Installation video was most helpful. Took about 2 hours to install which could have been shortened if I would have followed directions and not tightened bolts until the end. Product is good and customer service was as well. Would highly recommend.
by: Perry01/25/2018
Good solid American made product, Good price (I couldn't build it for that) Instructions where good, hour installation w/air tools, shipping was fast and free, all hardware was there (nothing missing). I would order again and would recommend.
Perry
1/25/2019
All good
by: Luke05/16/2021
2011 ChevroletSilverado
Almost easy to install, for some reason alignment was difficult with the small bolts. Still not bad. Very happy overall.
by: Mark09/08/2023
2012 ChevroletSilverado
It was not as easy yo install as the video seems to suggest. I had planned to do it myself with the truck on ramps, but had to get someone with a lift to do it. Once the plates were mounted the main part didn't line up just right and it took more pressure than I could apply while lying on my back. Other than that it is great. Very strong and just what I needed.Thanks.
by: Dave11/06/2017
Chevrolet
Beauty install. Just had to trim a 2x2inch slot in the air dam under the bumper. Didn't have to touch the facia. You can hardly see the receiver.
No drilling!!!
by: Paul11/06/2021
2011 GMC Sierra
The questions that you answer about what truck you have do not get all the way to the correct model. So then when you scroll through the available products, it is showing products for different models that dont apply to your truck(like the 1500, 2500, 3500 etc). However, you dont realize this as you just finished putting in the inputs for your vehicles and then of course assume that the list they give you of available products would only include your vehicle since they say "confirmed fit" for your model. They sent me the hitch for the gmc sierra 1500, which does not fit my 2500 GMC and then want me to pay the $50 to send it back. It seems like the designers of the website should have finished the job before they went to lunch. Now I am out the money.
Jenny N.
11/8/2021
I will have our customer service department reach out to you.
by: Ryan01/09/2023
Bought this hitch to add a plow to my 1/2ton truck the hitch was delivered with two of the same mounting brackets (passenger side) contacted them about problem and they said we will ship you the right bracket… bracket showed up and it had looked like it was dropped and slid across the pavement with multiple scratches and chips out of the paint. Not the happiest with the product since it’s not even on the truck yet. Over all the hitch it self is built well just horrible handling of products!
Jenny N.
1/13/2023
I hate that you experienced multiple issues with this order. I will have our Customer Service team reach out to you as quickly as possible.
by: Wes F08/22/2016
2010ChevroletSilverado
Curt Front Trailer Hitch arrived quite fast.
The hitch is very sturdy and attaches to the sturdy tow hooks.
The instructional video was very helpful especially for the step where you "fish" a bolt through the front frame rail. Turned out to be simple with the included fishwire. The video was for a 2007 Silverado but it was exactly the same as for my 2010 1500 Silverado.
Best installed with a helper at one point on a lift, but I installed it by myself using a pair of wheel ramps, a creeper, and a small hydraulic jack to lift the hitch into place for fitting and installation.
Why install a front hitch? When maneuvering a trailer in tight quarters, it is hard to do it with the trailer connected to the back of the tow vehicle. You have to keep straight which way to turn the steering wheel and the trailer's turning is slow to respond so you often turn too far and have to start over. With the trailer attached to the front of the vehicle, you can push the trailer into a tight place easily since the trailer responds immediately to steering changes. And, you can easily and immediately see the changes to the trailer's path. And you can also pull the trailer out of a tight path easily.
I grew up on a farm always pulling and pushing trailers into exact spots. I quickly found how great a front end hitch is for maneuvering.
by: Michael 12/30/2023
Works well for the price.
by: Billy02/13/2018
2008 GMC Sierra
I ordered both the front and rear Curt class 3 hitches for my 2008 Gm sierra. The factory rear hitch had rusted from the inside and had split all the way across. This new hitch is a lot more heavy duty , with thicker metal and the ends are sealed to keep water out. I liked it so much , I ordered this front hitch to use our bicycle rack on front when we pull our camper . Did not know how to carry our bikes until I ran across this hitch on Trailer. I think it will solve our problem . Thanks etrailer !!! Also had best price, got free shipping, prompt service, and excellent customer service !! Will definitely order from them again !!!
by: Timothy 12/05/2023
Worked Great easy install
by: Jeff B.10/04/2011
2008 GMC Sierra
Fit between the mounting brackets on my 2008 GMC Sierra 1500 4x4 was a little tight but it bolted up just fine.
Looks very well made.
I removed the lower front air dam ( I didn't like it anyway) & it fit perfectly underneath the bumper & license plate mount.
Will be using the front hitch skid shield with this.
Grant I.
10/22/2014
FYI: The air dam is there to help with aerodynamics on the underside of the truck. In short, it helps make the truck more fuel efficient. No harm in removing it if you dont mind burning a bit more fuel.
by: Rick01/12/2023
etrailer was awesome as usual. I did have an issue with the product (Curt) having an incorrect part (two right side brackets, no right side bracket) which prevented installation of the receiver, Spoke with Dave at etrailer who initiated a fix for the problem right away. Cudos to Dave and etrailer but one star for Curt.
by: Christopher 09/30/2022
Worked well with snowplow
by: Will11/12/2022
Seems to be well made but was disappointed in two areas. I'm glad etrailer had a video of the install because the directions provided were very vague. The other issue was the bolt hole on the bracket that bolted to my crossmember didn't line up. I had to take the receiver back off the truck and elongate the hole in the receiver.
25
101
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Snow Plow for a 2005 Honda Pilot
- We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work.
The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328.
This particular plow is 82" wide and 19" tall.
view full answer... - Snow Plow For 2003 Ford Ranger
- We do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
view full answer... - Where Does Curt Hitch Tube Opening Sit on 2002 Jeep Grand Cherokee When Installed
- I was able to find a better picture that shows where the hitch opening of the Curt front hitch part # C31048 will be when installed on a similar Jeep Grand Cherokee as your 2002 model that I attached to this page. It basically just sits right below the front bumper. I also lightened up the picture you mentioned so that you can see where it's at on that picture as well.
view full answer... - Snow Plow Recommendation for a 2002 Jeep Wrangler
- Actually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you.
I attached a review video for this plow for you to check out as well.
view full answer... - Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?
- Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
view full answer... - How to Determine if the SnowBear Plow # SB324-080 Would Block Headlights
- The blade height of the SnowBear Plow # SB324-080 that you referenced is 19 inches. Most likely your headlights will sit higher than this, but if you measure from the ground up 19 inches then you would know where the top of the blade would sit and whether or not the headlights would be blocked.
view full answer... - Does SnowBear Personal Snowplow for 2 Hitches # SB324-080 Come with Winch
- The SnowBear Personal Snowplow for 2" Hitches # SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.
view full answer... - Recommended Snow Plow For A 1994 Jeep Wrangler
- I can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow.
We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT
view full answer... - Replacement Spring for SnowBear 324-080 Snow Plot
- I have a solution for you, but the tension springs for a SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall # SB324-080 are not sold individually. However, the Replacement Spring Kit for SnowBear Snowplows # SB600-128 comes with 2 springs and the hardware needed to repair the plow, so you would be able to replace your lost spring and still have an extra spring on hand in the event of a future loss or break.
We do also have some other parts available for
view full answer... - Snowplow and Front Mount Trailer Hitch for a 2015 Ford F-150
- Yes, I recommend the SnowBear 82 inch snowplow # SB324-080 for your 2015 Ford F-150. You will also need to have a front mount hitch installed, # C31083, to mount and use the plow.
I also recommend the off-road lighting kit for this plow, # SB324-127, for better visibility when plowing at night since plows have the tendency to block vehicle lights.
view full answer... - Front Hitch and Snow Plow Recommendation for a 2003 GMC Envoy
- As long as you have a front hitch on your 2003 GMC Envoy like the # 31055 the snow plow part # SB324-080 will fit. It's a bit wider than most plows that would get used on a smaller SUV like the Envoy, but if you plan to upgrade to a full size truck eventually this would be a good plow to use.
You would be able to easily transfer it over to the Sierra when you needed too.
view full answer... - Recommended Front Mount Hitch for Attaching Snow Plow to 2004 Jeep Grand Cherokee
- We do indeed offer a front mounted hitch for your 2004 Jeep Grand Cherokee. You'll need the Curt # C31048. Once the front mount receiver is in place, you'll have the mounting point for a snow plow like the SnowBear # SB324-080. If you click the provided link, you can see the installation instructions for the hitch and the plow.
view full answer... - Parts Needed to Mount Snow Plow to 2010 Ram 3500
- The personal snowplows from SnowBear simply mount to a hitch receiver so to add one to your 2010 Ram 3500 you'll need the Curt # C31065.
If you have the Winter Wolf edition that requires vehicle-specific mounting brackets then we'll either need to find you a different setup or you'll have to have a shop fabricate some mounts as SnowBear doesn't have any custom mounts for a 3500 Ram pickup.
For the personal snowplow from SnowBear you'll need that Curt Front Hitch # C31065 and SnowBear
view full answer... - Recommended Snow Plow and Front Hitch for a 2024 Chevy Silverado
- Yes, you can so long as your 2024 Chevy Silverado 1500 has a front hitch like the Curt item # C22NR. The SnowBear Plow for 2" Hitches item # SB324-080 mounts inside a 2" front hitch receiver.
The SnowBear item # SB324-080 is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control.
view full answer... - What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?
- I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is
view full answer... - Recommended Snowplow for a 2020 Jeep Wrangler
- It sounds like you're looking for a snowplow setup for a 2020 Jeep Wrangler and if that's the case we have some great options. I recommend the SnowBear Personal Snowplow part # SB324-080 with Curt Front Mount Trailer Hitch Receiver part # C31086. The SnowBear plow has an 82" wide blade with electric winch that allows you to control it from inside the vehicle. The 2" hitch mount will make it easier to get the plow on and off the vehicle.
We do not carry ACI plows unfortunately.
view full answer... - Can Draw-Tite Front Mount Hitch 65080 Mount Snow Plow
- Yes, you can absolutely mount a snow plow like the SnowBear Personal Snowplow for 2" Hitches # SB324-080 you referenced on the Draw-Tite front-mounted hitch you asked about:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65080
This hitch, which fits 2007 and up Toyota Tundras and Sequoias, meets the necessary standards and has a 500 lb vertical load limit (which is like tongue weight for a front-mount hitch), and the SnowBear weighs 315 lbs, so it has more than the necessary capacity.
view full answer... - Snow Bear Plow Recommendation for 2008 Honda Ridgeline
- You may not be able to use the Snowbear plot part # SB324-080 on the highway but you could still transport it in your front hitch to your other driveway as long as the plow was up off the pavement.
You'd also need the front hitch part # 33328 installed on your 2008 Honda Ridgeline.
view full answer... - Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep Liberty
- The Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121.
You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
view full answer... - Curt Front Hitch for 2009 Chevy 3500 HD 4x4
- There is a Curt front mount hitch that will work on your 2009 Chevy Silverado, but the Curt Hitch # 31322 that you referenced is only for 1500 model trucks.
You would want a Curt Front Hitch # 31109. I attached installation instructions and an install video for this product for you to check out also. This hitch has a 500 lb vertical load limit so it should do well to carry a generator and cargo carrier as long as the combined weight is less than that.
To see all of the cargo carriers
view full answer... - Which Front Mount Recevier Hitch for 2007 New Body Chevy Silverado 2500
- Per the fitguide on our website, the Curt # 31322 would be a fit for the 2007 Silverado new body 1500 model only. For a 2500, you'll want to use # 31109. I've confirmed with with Curt.
Draw-Tite also offers the # 65050 which will sit up higher, just under the bumper, instead of just under the fascia, so you'll have better ground clearance at the front if you went this route. I've confirmed this fit with the folks at Draw-Tite.
The installation videos for each hitch that I've linked
view full answer... - Will A Front Mount Trailer Hitch Receiver Fit on a 2009 Chevrolet Silverado With Boss Snow Plow?
- In my experience front mounted trailer hitch receivers will generally not fit on trucks with a snow plow mount also on the front. We do have the Curt # 31322 for 1500 models and the Curt # 31109 for 2500 & 3500 models if you would like to check their mounting pattern with the mounts for your Boss snow plow. I have linked the installations as well as installation videos for both these at the bottom of the page so you can check and see if they will fit with your plow.
If the plow uses
view full answer... - Front Mount Trailer Hitch for a 2012 Chevy Silverado 3500HD Diesel
- The Curt hitch # 31322 is for 1500 models and will not fit a 3500HD. For your 2012 Chevy Silverado 3500HD diesel take a look at # C31023. I have included a link to the installation instructions as well as a video that shows a typical installation for you.
view full answer... - Does Fascia Need To Be Trimmed When Installing Curt Front Hitch # 31322 On 2008 Chevy Silverado Z71
- The instructions for installing the Curt 2 Inch Front Hitch # 31322 on a 2008 Chevrolet Silverado 1500 Z71 does say that you will need to trim the fascia as needed. You will install the side plates of the hitch to the vehicles frame rails. Then, you will attach the hitch crossmember to the side plates on the vehicle. This will show you where the fascia will need to be trimmed to gain access to the hitch receiver tube.
I am including a link to the installation instructions for the Curt
view full answer... - Trimming Front Fascia/Air Dam to Install Front Mount Trailer Hitch on a 2011 Chevy Silverado 1500
- The instructions for installing the Curt 2 Inch Front Hitch # 31322, see link, on a 2011 Chevrolet Silverado 1500 do say that you will need to trim the fascia as needed. First, you will install the side plates of the hitch to the vehicles frame rails. Then attach the hitch crossmember to the side plates on the truck. This will show you where the fascia will need to be trimmed to gain access to the hitch receiver tube.
The instructions do not show where the fascia has to be trimmed because
view full answer... - Weight of Curt Front Hitch 31322
- The Curt hitch part # 31322 that you referenced weighs 38 lbs.
view full answer... - Difference Between Curt Hitch # 31322 and Draw Tite Hitch # 65052
- Both the Curt Front Hitch part # 31322 and the Draw Tite part # 65052 are a fit for the 2011 GMC Sierra 1500. They have similar prices, similar capacities and will give you a hitch opening in about the same location.
Biggest difference is they are made by different brands and use different parts of the vehicle to mount the side brackets.
Since the Draw Tite is totally welded and does not have any sections that are bolted together it would be what I would go with.
view full answer... - Front Mount Hitch for 2013 Chevy Silverado 1500 Without Trimming Air Dam
- Curt Front Hitch # 31322 works on your 2013 Chevy Silverado 1500. Modifying the air dam is usually required to get front mount hitches installed on most vehicles. We don't have any other options for your truck that won't require trimming. The air dam is made out of plastic and can be easily removed or trimmed to work with the hitch. The front air dam can very with model. I have also attached a video to help you with determining where the hitch sits on your truck and how to get it installed.
view full answer... - How to Determine the Right Ball Mount to Tow a Trailer Level with a 2012 Chevy Silverado
- All you need is a ball mount with the right amount of drop to tow the trailer level. To determine the amount of drop you will need there are some measurements that you will need to take.
First make sure the truck and trailer are on level ground when taking the measurements. You will measure from the ground to the top of the receiver opening on the hitch on your 2012 Chevy Silverado.
Next measure from the ground to the bottom of the trailer coupler with the trailer level and on level
view full answer... - How To Install The Curt 31322 Front Mount Hitch Receiver On 2007 GMC Sierra 1500 New Body
- The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31322 is custom-made and is confirmed to fit your 2007 GMC Sierra new body style. This is not made to be installed upside-down or reversed in any manner. You may think the 4 bracket bolts could be removed and would allow the receiver to be flipped, and then reinstall the 4 bolts to the brackets. But this won't work as you would not have clearance for your bumper cover; and more importantly the rear bracket/tongue will not fit
view full answer... - Front Trailer Hitch Receiver Options For 2010 Chevrolet Silverado 1500
- The Curt Front Mount Trailer Hitch Receiver # 31322 and Draw-Tite Front Mount Trailer Hitch Receiver # 65052 are the 2 options available for a front mounted receiver on your 2010 Chevrolet Silverado 1500. Both of these receivers will sit below the bumper and have identical load ratings of 500lbs tongue weight, 5,000lbs trailer capacity and 9,000lbs line pull.
The main difference is in the construction of the 2 parts and where they mount to the frame. The Draw-Tite # 65052 is all welded
view full answer... - How To Mount a SnowBear ProShovel SnowPlow On a 2009 Chevy Silverado 1500
- The SnowBear ProShovel SnowPlow mounts using a standard 2" receiver tube according to my research therefore in order to use this on a 2009 Chevrolet Silverado 1500 you only need the Curt Front Mount Trailer Hitch Receiver part # 31322 which is a drill free option that can be used for several other purposes when you are not plowing such as helping back-up a trailer, mounting a winch, etc.
If your SnowBear SnowPlow does not mount using a standard 2" receiver tube then please re-verify
view full answer... - Will the Fisher MM2 Snowplow Mounting Brackets Work With a Front Mount Hitch Receiver
- I do have an option that will allow you to attach a snowplow to the front of your 2010 Chevy Silverado 1500 but the Curt Front Mount Trailer Hitch Receiver part # 31322 will not work with the Fisher MM2 Mount Kit as they both occupy the same space on the frame rails.
For a snowplow that will work well with a 2" front mount trailer hitch receiver and your Chevy Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219. The Detail K2 Avalanche has an 82" wide
view full answer... - Front-Mount Hitch Installation on 2013 Chevrolet Silverado 1500
- We do offer two front-mount 2-inch hitches for your 2013 Chevrolet Silverado 1500 including the Curt # 31322 that you referenced. We have an installation video showing a 2007 Silverado that you can see by clicking on the included link. Also the written instructions are linked for you at right. Installation requires removal of the air dam, if present, but Curt does not specify that it requires trimming, although this may be an option if you'd rather not remove it entirely.
All required
view full answer... - Can Curt Front Hitch # 31322 Install on 2013 Chevy Silverado with Lift Kit
- Adding a lift kit should not affect fit of Curt trailer hitch # 31322 on your 2013 Chevy Silverado unless the devices used to lift the truck occupy any space needed by the hitch or any of the attachment points on the frame needed by the hitch. I have included a link to the installation details for this front mount hitch so you can determine if there would be any fit issues.
view full answer... - Does Curt Front Hitch # 31332 Fit 2012 GMC Sierra 1/2 Ton
- Yes, the Curt front hitch part # 31322 that you referenced is a confirmed fit for your 2012 GMC Sierra 1/2 ton with 4 wheel drive.
I attached an install video for this for you to check out as well.
view full answer... - Distance From Center of Hitch Pin Hole To Bumper on CURT Front Mount Trailer Hitch # 31322
- I contacted our representative at CURT about the CURT Front Mount Trailer Hitch # 31322. He informed me that the distance from the center of the hitch pin hole, to the front edge of the bumper measures approximately 7 inches.
We do not have a Hidden Hitch front mount hitch available for the 2011 Silverado, but we do have a Draw-Tite model, part # 65052. The Draw-Tite hitch distance should be near the same distance as the CURT hitch as it will sit near the same location.
When using
view full answer... - Curt Front Mount Trailer Hitch Installation for a 2011 GMC Sierra 1500
- For installation of Curt front mount trailer hitch # 31322 you may or may not need to use the washers on the driver's or passenger's side attachment points. If there was enough of a gap between the side mounting brackets and the cross member of the hitch then you would use them.
The square piece you mentioned is a block used to prevent that center carriage bolt from spinning when tightening the nut. It is possible it won't be needed but the only way to know is to fishwire the bolt through
view full answer... - Recommended Front Mount Hitch for 2015 GMC Sierra 1500 Crew Cab
- I do have an option for you, however the Curt Front Mount Hitch Receiver # 31322 referenced in your question is not confirmed to fit your 2015 GMC Sierra. This particular hitch is designed for earlier models of the Sierra 1500 (2008-2013) and will not fit with the frame on your 2015 model.
If you have the Sierra 1500, I instead recommend the Curt Front Mount Hitch # C31069. This hitch is confirmed to fit your truck and it features a simple, bolt-on installation. It has a line pull rating
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Kathleen M
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Randy B
Test Fit:
Brent H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado Accessories
Product Experts Available Now!
Call 1-800-940-8924
Peter
12/18/2018
It worked out great, I use a winch, and can move it to the front or rear as needed.