2021 Ram ProMaster 2500 Floor Mats

The floor mats I recommend for your motorhome built on a 2019 Ford E-450 motorhome are the WeatherTech All-Weather Front Floor Mats because they are constructed out of a highly durable thermoplastic designed to withstand the gauntlet of dirt,…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need…

Yes, the 60-Degree angle of the 1/2"-20 DeeMaxx Trailer Wheel Lug Nut #DE93GR is standard for the vast majority of trailer wheels out there. There are some 90-Degree cone shapes but these are typically for…

I have one that does but the Hidden Hitch item #DT62GR will not. It will come out behind the bumper and hang significantly lower then your factory receiver. Instead, I recommend the EcoHitch Hidden Trailer Hitch item #306-X7395. This hitch is…

I reached out to a representative of Rhino Rack who told me that when folded, zipped up and sitting on the rack, the Batwing Awning #RR33200 measured just slightly over 98 inches. So you were correct that it was very close to 8 feet (96 inches)…

The vehicle awning you'd need is one that bolts to the side of your camper like the Thule Hideaway part #TH490011 as there isn't a version of the Batwing that would…

Hey Randy, yes the Inno Tire Hold HD Bike Rack #IN25RR can work to carry bikes with fenders but they would need to be smaller fenders and not the longer ones you sometimes see like on cruiser bikes. Nearly all e-bike fenders will work with this…

A 19 mm socket would be needed to remove the DeeMaxx Lug Nut part #DE93GR.

No, I am sorry we do not have replacement strap pads for the Hollywood Racks Destination E Bike Rack item #HLY66ZR you were looking at. I checked with Hollywood racks and they do have it available on their website.

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that…

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…