Expert Review Video:
Trailer Hitch Size:
1-1/4 Inch Hitch Opening
Towing Capacity:
200 Pound Tongue Weight
2000 Pound Towing
Trailer Wiring:
2016 Honda Accord Trailer Wiring
Recommended Ball Mount:
Features:
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Heat shield must be modified or trimmed for hitch installation
More Information >Trailer Hitch Size:
1-1/4 Inch Hitch Opening
Towing Capacity:
200 Pound Tongue Weight
2000 Pound Towing
Trailer Wiring:
2016 Honda Accord Trailer Wiring
Recommended Ball Mount:
Features:
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Heat shield must be modified or trimmed for hitch installation
Underbody trim panel must be modified or trimmed if present
Tech Tip:
Hitch will also fit Hybrid models.
More Information >Trailer Hitch Size:
1-1/4 Inch Hitch Opening
Towing Capacity:
200 Pound Tongue Weight
2000 Pound Towing
Trailer Wiring:
2016 Honda Accord Trailer Wiring
Recommended Ball Mount:
Features:
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Heat shield must be modified or trimmed for hitch installation
Underbody trim panel must be modified or trimmed if present
More Information >Trailer Hitch Size:
1-1/4 Inch Hitch Opening
Towing Capacity:
200 Pound Tongue Weight
2000 Pound Towing
Trailer Wiring:
2016 Honda Accord Trailer Wiring
Recommended Ball Mount:
Features:
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Installation Notes:
No drilling required for installation
Exhaust must be temporarily lowered for installation
Heat shield must be modified or trimmed for hitch installation
Underbody trim panel must be modified or trimmed if present
Tech Tip:
Hitch will also fit Hybrid models.
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I&…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
Thanks for your promt responce. I received my hitch and installed it with ease thanks to the instructions provided. Not only did they have my hard to find hitch they sold it to me for nearly half the price of the other guys. All my future towing purchases will be done through Etrailer. Thanks Tony
Tony
Spokane, WA