Videos
for Trailer Ramps
Help Articles
for Trailer Ramps
Expert Answers
for Trailer Ramps
The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Hey Tim, thanks for the pictures. We have exactly what you need. I recommend the Pollak Trailer Connector Adapter #PK12-724. This will plug in to the 7 round pin male plug on your vehicle and allow you to plug the 7-flat female trailer plug into…
view full answer...I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.
view full answer...The etrailer Invisible Base Plate Kit #e86YR is compatible with compatible with all etrailer, Demco, and Blue Ox tow bars so you won't need an adapter to connect to your Aventa II tow bar.
view full answer...It is usually possible to replace the spring bars in a weight distribution hitch setup so long as the two sets of bars are the same type, both trunnion style for instance, and both are from the same generation of hitch. A 10-year-old setup may not…
view full answer...If you already have a seal that you're replacing then you want to get a seal that's a similar size, otherwise if it's a brand new application then I recommend trying to find the depth of the…
view full answer...From what we have found, the Nissan factory brake controller harness has the following color/functions: Nissan Red to brake controller black for 12-volt power Nissan Red with green tracer to controller red for input from stoplight Nissan black to…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...We do have an option for trailer ramps that have the weight capacity you need in order to load your 2015 Ford F-450, which from my research looks to have a curb weight of just under 9,000 lbs. So the ramps that will work for you are the Gen-Y Hitch…
view full answer...If you can let me know what the pin box number is on your 5th wheel I can let you know which MORryde upgrade will be correct. There should be a sticker on the side of your pin box with a number listed on it that I'll need. For…
view full answer...Since the markings and numbers are weathered away on your pin box you can measure the bolt pattern to find the correct replacement. I've attached a picture and our help guide to help you with these measurements. Once you have…
view full answer...Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…
view full answer...