Videos
for Trailer Door Hinges
Help Articles
for Trailer Door Hinges
Expert Answers
for Trailer Door Hinges
The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not…
view full answer...Thanks For the photos of your hinges. That helps a lot when we are trying to find something for a customer. I have attached a photo of a hinge, part #PLR1902 that may work for you. You can check out the photo and see the dimensions for the hinge.…
view full answer...The hole dimensions for the Over the Seal Strap Hinge are as follows. From the center of the hinge to the holes going down the shaft is 3-1/2", 9", and 14-1/2" respectively. So the measurement you're looking for is…
view full answer...Thank you for the pictures! I may have an option for you, but none of the hinges we offer have mounting brackets that are 5" tall.. The most likely option we have is the #PLR4040 which opens 270 degrees. The mounting bracket on the…
view full answer...The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.
view full answer...Yes, you can cut the 8 foot long hinge kit part #MA32VR down to 7 feet in length and it would work great.
view full answer...To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…
view full answer...I'm not sure what kind of hingers you had on your trailer but a T-strap hinge like the #PLR2212-AS or #PLR3408-SS is probably your best bet for replacement. I went ahead and attached a link below to all of our available hinges. You can filter…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...You'll need to start by having a new hanger welded on since it looks like the hanger towards the front of the trailer has been broken off. Once that's welded in place you can then install a new leaf spring. To determine the correct…
view full answer...We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…
view full answer...