Videos
for Trailer Dolly
Help Articles
for Trailer Dolly
Expert Answers
for Trailer Dolly
You wouldn't want to try and move a trailer up an incline with the MT70881. The dolly itself would be fine but you would most likely not be able to pull that heavy of a trailer up an incline. And then if you somehow did get it going up…
view full answer...Trailer Valet XL Trailer Dolly #TVXL25 will be able to move your trailer at the near 90 degree angle and up the incline of the driveway. The dolly has 2 gears and you will likely find that the low speed, 27 to 1 ratio will make it easier on you…
view full answer...Hey Frank, so the Blue Ox SwayPro weight distribution system you'd want is the part #BXW0750 which has a tongue weight range that matches what a 6,000 lb trailer would have.
view full answer...Thanks for reaching out! The purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR is to give you better maneuverability with a tandem axle trailer when utilizing a trailer dolly like the Trailer Valet XL #TVXL25. The…
view full answer...The warranty for the Trailer Valet RVR5, part #TVRVR5, includes a 1-year limited warranty. It covers any manufacturer defects with material or assembly. Wear and tear, damage from use, or damage from improper maintenance/repair are not covered.…
view full answer...You are correct that the Curt safety chains like the Curt Safety Chains with Latching Hooks #C19749 are made over seas, but that does not mean they are not still a quality part. Quite a few manufacturers of chains actually use products from over…
view full answer...Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…
view full answer...When fully retracted, or collapsed the jack is 28.58 inches tall, and 38.42 inches tall when extended as shown in the provided diagram. I've linked you to a product description video featuring the #ORJW1SU ARK Extreme Off-Road Ratcheting…
view full answer...If your trailer is 5,000 when you are wanting to move it then you can use the Trailer Valet RVR5 Remote-Controlled Trailer Dolly #TVRVR5 which is rated for 5,500 lbs. If you are wanting to move your trailer and that weight exceeds the 5,500 lb mark…
view full answer...I would be happy to! The bottom of the foot to the center of the pipe mount is 10-1/2" when retracted and 24-1/2" when fully extended on the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option item #TV64FR. Sorry I…
view full answer...Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't…
view full answer...The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote - 3,500 lbs #TVRVR3 you referenced has a tongue weight capacity of 350 lbs max. The mounting bracket with attach directly to your trailer tongue and has a quick release cotter…
view full answer...