Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you…

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

To secure your PJ Trailer that's equipped with the Demco eZ-Latch Coupler #DM14040-81 I highly recommend the Fastway Universal Trailer Coupler Lock #FA86-0015-318, which…

We haven't had any issues with the InfiniteRule Locking Pins part #IR57RR coming loose so I wouldn't anticipate that being a problem at all. When…

Hey Bill, so yeah we worded the fit of the lock you mentioned odd but it's not going to fit a 3 inch setup but we can help as we have the Blaylock EZ part #BLTL-60-40D that was designed for 3 inch…

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

If the front part of your square-bodied coupler is approximately 3 inches tall, based on the inner dimensions of the lock the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 will work well for you. The #BLTL-33 has inner dimensions of 3-1/8 inches x…

Hey David, for your 1990 Jeep Wrangler the Roadmaster Diode Kit part #RM-15267 would be a really great option. This installs diodes on the Wrangler's taillight circuits which allows the RV to…

The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of…

Yes, the Redarc Tow Pro Liberty part #RED52VR can install in your 2023 Ford Ranger that has the factory 7-way. It would wire directly to the brake controller install wiring that is present under the dash.

We had the chance to install the Fastway coupler lock part #FA86-0015-318 on an actuator like your UFP A-60 and found that it fit and worked well. Check out the picture I attached to see the lock installed on the coupler.

There is not a factory brake controller plug-in port on your 2018 Ford Transit T250 so in order to install your existing Tekonsha Primus Brake Controller you will need to hardwire it in using the Wiring Kit #5506. This kit will provide you with the…