Coupler Lock Recommendation for UFP A-60 Brake Actuator

Question

Question:

I have a boat trailer with this coupler UFP A-60 HYDRAULIC BRAKE ACTUATOR 7500LB. 2 BALL. 2 AXLE DISC BRAKES. #34627. Im looking for a lock to put on it. What would you suggest? Thanks

asked by: Kevin Y

0

Expert Reply:

We had the chance to install the Fastway coupler lock part # FA86-0015-318 on an actuator like your UFP A-60 and found that it fit and worked well. Check out the picture I attached to see the lock installed on the coupler.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The best surround style trailer coupler lock we offer for the square style trailer couplers is the Fastway Universal Trailer Coupler Lock part #FA86-0015-318 because of the long u-bolt which will accommodate a much taller coupler head like those on…

view full answer...

Answer 2

The Dexter DX7.5L A-60 Brake Actuator part #DX89FR for disc or part #DX33FR for drum will work to replace both a UFP A-60 or A-75 Brake Actuator so there will be no worried here. The A-60 is rated for 6K and the A-75 is rated for 7.5K. The Dexter…

view full answer...

Answer 3

Thanks for sending a picture of your trailer. That makes it easy to know what style of coupler lock would fit it. For a coupler lock that would fit your trailer I would recommend the Fastway Coupler part #FA86-0015-316. This is our best selling…

view full answer...

Answer 4

Sounds like the bolt and nut may be rusted stuck. I recommend using the UltraLube Biobased Spray Lubricant and Penetrant. This spray lubricant can help penetrate between the bolt and nut to loosen up any dirt or rust that may be causing the nut to be…

view full answer...

Answer 5

Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…

view full answer...

Answer 6

Yes, the K-Source Snap & Zap Custom Towing Mirrors, #KS80920 are confirmed to fit the 2019 GMC Yukon XL. With these towing mirrors, you get a guaranteed fit and seamless OEM style as they match the contours of your factory mirrors, and retain use…

view full answer...

Answer 7

The Dexter DX7.5L A-60 Brake Actuator #DX89FR needs to be attached to your trailer with grade 5, 1/2" diameter bolts torqued to 80 ft-lbs. Do note if your square tube frame uses thin wall tubing you will need to insert spacers inside the frame…

view full answer...

Answer 8

Yes, the Trailer Coupler Lock #e98887 that you referenced will work with a UFP A-60 coupler lock. The product picture for this lock shows it being used on an A-60. I attached a review video for you to check out as well.

view full answer...

Answer 9

I went out into our warehouse to grab the Fulton Hi-Mount Spare Tire Carrier #FSTC1000301 and found that the mounting holes are 3 inches apart from side to side on the mounting bracket.

view full answer...

Answer 10

Out of the spare tire carriers we have, I am sure that we will be able to find one that will hold the spare tires on your trailer. I have incldued a link to all of the options for you to view. Besides the space where you can mount a spare tire…

view full answer...

Answer 11

For an offset spare tire carrier that would mount to the frame of your Little Guy Rough Rider trailer that would be high enough to give you good ground clearance check out the Offset Trailer Spare Tire Carrier by Dutton-Lainson #DL22120. This carrier…

view full answer...

Answer 12

I recommenced the Fulton Hi-Mount, #FSTC1000301, This carrier will fit trailer frames up to 3" x 4" and is a clamp-on mount with a corrosion-resistant finish. I have added a couple video reviews of this carrier for you to take a look at.

view full answer...

Coupler Lock Recommendation for UFP A-60 Brake Actuator

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching