Videos
for RV Leveling Blocks
Help Articles
for RV Leveling Blocks
Expert Answers
for RV Leveling Blocks
I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29"…
view full answer...Since the Ultra-Fab Electric A-Frame Jack #UF97FR has a triangular bolt pattern it would rotate the jack 120 degrees and may or may not work for your application. There are other jacks which have multiple mounting patterns on the flange like the…
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm…
view full answer...Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…
view full answer...The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…
view full answer...Yes, the Redarc Tow Pro Liberty part #RED52VR can install in your 2023 Ford Ranger that has the factory 7-way. It would wire directly to the brake controller install wiring that is present under the dash.
view full answer...We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.
view full answer...I confirmed with Camco that their FasTen RV Leveling Blocks #CAM44521 do not carry a maximum RV weight rating so they are compatible with virtually any RV or motorhome out there. This set is gray and the part #CAM44512 is yellow.
view full answer...Good question, and it sounds like you are asking if you need to calibrate the electronic level of the Hopkins RV Leveling Kit with Electronic LED Smart Level #HM0820K. The answer to that is yes, you will need it calibrate it to level. To do this you…
view full answer...We carry a few different weld-on camper jacks to help stabilize your trailer and allow you to easily get your equipment off the trailer. The real question is going to be how long of a jack do you need? The Square Drop Leg Stabilizer Jack - 18"…
view full answer...What you are experiencing just means that you need to calibrate the Hopkins Electronic LED Smart Level #HM08201. To do this you need to set the Smart Level on a table and level it. Once the green bubble is where it needs to be you press and hold the…
view full answer...Yes, all of the Firestone Ride Rite air suspension systems use 1/4 inch tubing and 1/4 inch NPT fittings like the #F2012 that you referenced. This kit includes 18' of red 1/4" air line, (2) 1/4" NPT (National Pipe Thread) elbow…
view full answer...