Camco Leveling Blocks - Stackable Blocks - CAM44512 Review Video

The things that the 18K Demco Hijacker #DM8550034 and the 18K SuperGlide have in common are that they both offer 14" of travel, they are both automatic sliding 5th wheel hitches, have 2-point pivoting hitch heads, are compatible with…

The single leaf #e46SR is designed for use with a mobile home axle, which is intended to be a one-time use item, so I'd wholeheartedly recommend going with the other option, part #e34SR which is designed for use on a trailer that's designed…

I spoke to my contact at Rhino Rack and he informed me that the length of the roller on the Rhino Rack Ladder Roller #RR1500 that you referenced is 56-1/4 inches. Check out the picture I attached to see this measurement.

For a MaxxAir cover that would let more air in you would need the part #MA00-955003 which has a translucent smoke finish. We don't offer without the mounting hardware but realistically even if we did the price wouldn't be that much better…

With the MaxxAir Standard RV and Trailer Roof Vent Cover #MA00-933069 installed over your roof vent you'd be able to leave the lid of your vent open all the time which will make a huge difference in terms of ventilation. I would try this first…

No, the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip #MA26JR that you referenced does not come with a bug screen.

Both roof vent covers, Camco part #CAM40453 and MaxxAir part #MA00-933069, have the same purpose and fit on any standard 14 by 14 inch roof vent. Both of them allow you to keep your vent open during rain without water getting inside your trailer. The…

The correct big screen for the MaxxAir II RV and Trailer Roof Vent Cover part #MA26JR is the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers part #MA10-20121.

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…

If you have a Lippert 3,500 lb Square Torsion Axle then the correct lift kit is the Axle Riser Kit part #LC382741. That said, none of the Dexter Torflex Lift Kits like part #K71-725-02 will work.

Yes, we sure do! For a stainless steel 1-3/8 inch long thumb turn cam latch cylinder use #295-000013.

The longest thumb cam lock we offer is the Replacement Thumb Turn Cam Latch Cylinder part #295-000014 which measures 1-3/4" long at the threaded portion.