Camco Leveling Blocks - Stackable Blocks - CAM44525 Review Video

The SumoSprings that are confirmed to fit your 2018 Thor ACE motorhome 29.3 is part #SSF-170-40-2. These have a 2,600 lb weight capacity and will do a great job at supporting your current suspension. Please note that these will not increase the…

I confirmed with Camco that their FasTen RV Leveling Blocks #CAM44521 do not carry a maximum RV weight rating so they are compatible with virtually any RV or motorhome out there. This set is gray and the part #CAM44512 is yellow.

On the Lippert underchassis storage pin and spare tire mount #LC125460 the center to center distance between the mounting brackets is approximately 70-1/2 inches. I have included some links that show some additional measurements. The overall…

That really depends on the length of cable that you need. If you only need 10 feet of cable the part #e98891 would be perfect. I can't imagine needing more than that so I would recommend this one. This is our most popular cable lock that we…

The gears of the 21k Demco Hijacker #DM8550035 are a bit heavier duty than the 18k capacity version #DM8550034 to allow it to have a higher capacity. The lighter duty hitch weighs 276 lbs and the heavier duty version weighs 308 lbs. To install this…

We carry only a few entry door locking latch kit, like #295-000019, and all have the same basic measurements which is the standard size on most RV door. The door locking latches measure 3-15/32 inches wide x 4-9/32 inches tall. What that means is…

The best option we have for your situation where the brackets of your pin box mounting are damaged is going to be with the Lippert 1621 5th Wheel Pin Box #LC1191191 which you can weld to the frame you have currently that you are reinforcing.

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR will fit in place of your Lippert Turning Point pin box, yes. The pin weight range of this pin box is 1,501-3,000 lbs which should be right about in your wheelhouse - I do…

Thanks for the pictures and congrats on the trailer! To replace your Turning Point pin box you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. This is the only gooseneck pin box that fits the mounting points for…

When putting the Roadmaster Falcon 2 All-Terrain Non Binding Tow Bar, item #RM-522, in the storage position while it is mounted in the tow vehicle receiver hitch you will need to put one arm in each hand, like pushing a wheel barrow. Then level the…

I spoke to my contact at Roadmaster about your Roadmaster Falcon All Terrain Tow Bar part #RM-522 and they informed me that the arm has been overextended which has then caused it to lock out. In order to release the arm you will first want to remove…

I think what you are looking for is the RoadMaster BreakAway kit, part #RM-98160. This kit was originally designed to be used for a second vehicle so all you have to do is move the cylinder and brackets. Since you have the bracket and cylinder, and…