The propane fitting adapter part #204129-MBS that you referenced has the propane flow through from the 1/4 male NPT side to the Type 1 fitting side.

The Mounting Post for Stromberg Carlson Extend-A-Line RV Mounted Drying Racks - Square Bumper or A-Frame #CL-01 you were looking at is 44" long as shown in the included diagram. While not designed to be used with a backup camera, it…

Thanks for the information, Luke! The Extang Revolution Soft Tonneau Cover EX54430 is the correct part number for your 2011 Ram 2500 short bed, and although it's been discontinued, the replacement tarp is part #EX53430 on our site.

Yes you can do exactly that; the B&W Companion uses the same #BWRVC3006 head unit on both hitches, and since you already have that head unit from the Companion hitch on your Chevy, you can simply purchase the Companion sliding base that fits…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

Thanks for the picture of your wheel and valve stem setup. I'd recommend 135 degree valve extenders like the part #WM8029135 as this will put the valve stem at a better angle than a 180 degree kit. These will work great with your current…

The mounting holes are 4-1/2 inches apart on center for the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring #337BDB1394.

If the 2 inch hitch on your vehicle is rated for at least 400 pounds tongue weight capacity, I would recommend using the Pro Series Steel Solo Cargo Carrier and Folding Ramp, #PS10401-10402. This carrier features a ramp for loading things like a…

When the Swagman Platform-Style 2 Bike Rack #S64663 you referenced is mounted to a 2 inch receiver there will be a distance of 10-3/16 inches from the center of the hitch pin hole on the receiver to the center of the closest wheel hoop. Whether or…

Yes, if you install the Stromberg Carlson trailer hitch #SC45MR by welding it you'd have a 3,500 lb towing capacity which be more than enough to tow a 3,000 lb trailer.

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75282 requires all hardware be torqued to 68 foot pounds according to the instructions. I've attached a photo in case you need anything else for this…

The Truma LevelCheck Propane Tank Sensor part #TR77VR uses ultrasound technology to check the propane level, the same technology used in doctors offices for newborns. Simply turn the device on and run it up and down the tank, the light will turn…