Videos
for LED Strip Lights
Help Articles
for LED Strip Lights
Expert Answers
for LED Strip Lights
Hey Peter you are right that the Opti-Brite LED Strip Light #OPT32ER does require its own separate switch. For that you could use really any on/off switch, my suggestion is the Single Rocker Switch #37212585 and the faceplate #37212845. If you are…
view full answer...The 12v accessory pin from the 7-way would need to be connected to the battery in order to charge it so you'd first need to make sure it was actually wired that way since not every manufacturer does. That being said the…
view full answer...Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500…
view full answer...I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge…
view full answer...Hey Gary, so the Yakima 54" Tracks for Roof Racks #Y26RR that you referenced are compatible with your setup as they provide the standard dimension roof tracks that your Sherpa Crows Nest was designed to fit. With that said the…
view full answer...Yes, the Kenda Karrier ST175/80R13 Radial Trailer Tire #AM31990 will indeed fit on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. The spare tire carrier will work with virtually any 4 lug, 5 lug or 6 lug wheel. The #AM31990 wheel uses the…
view full answer...The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole…
view full answer...By other dimensions I assume you are referencing the wheel bolt pattern for your 15 inch trailer wheel, and I have added a link below to a help article on how to find the correct bolt pattern. For a 15 inch wheel you likely have either a 5 on…
view full answer...There are 3 different mounting bracket styles depending on how exactly you're wanting to install the Premium Slim LED Strip Light #TN38ZR: - Standard Mount #TN22VR - 45 Degree Mount #TN34ZR - 90 Degree Mount #TN54ZR These…
view full answer...In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…
view full answer...The Pollak switch part #PK34513 that you referenced would be a great option, but I'd rather recommend you go with the Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount #337SW911 as this setup was made…
view full answer...This sounds like the problem could be a short or possibly ground related but based on what you have said a ground is much less likely. Look for any pinched or frayed wires on the trailer and fix as needed. This could cause a short resulting in…
view full answer...