Videos
for Hitch Pins and Clips
Help Articles
for Hitch Pins and Clips
Expert Answers
for Hitch Pins and Clips
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The Hitch Pin and Clip For 2-1/2" and 3" Hitches #337HP6256WC doesn't have a weight rating, but this is normal for a pin setup. These are tested to hold the weight ratings of the hitches…
view full answer...The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so…
view full answer...Trailer Hitch Pins like the Curt #C21500 do not have specific weight ratings and there is not a database available that will have this type of information. Generally speaking, a 5/8 inch diameter pin, which is designed for Class III, IV and V…
view full answer...No, it is not. The Roadmaster D-Ring Adapters item #RM-035 and item #RM-035-1 are only compatible with Roadmaster tow bars. There are no D-Ring adapters that work with the Curt Rambler Non-Binding Tow Bar item #C26FR.
view full answer...Hey Joseph, There's currently only one 2" trailer hitch receiver available for a 2024 Honda HR-V at this time with the EcoHitch Hidden Trailer Hitch Receiver #EH52KR. For the trailer wiring you'll need…
view full answer...Hey Greg, yes the Gen-Y Iron Grip Anti-Rattle Hitch pin part #GY99FR will work with the Curt ball mount you mentioned that was designed for 2-1/2 inch hitches.
view full answer...Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes…
view full answer...Hey John, we actually have a supplemental braking system that was designed specifically to be used with the Spartan K2 chassis you have that has the Safe Haul system with the Demco Air Force One Flat Tow Brake System part #DM54YV so this would be…
view full answer...The max capacity for the Curt Clevis Pin with Handle and Clip #C45804 is not something that has been measured. Steel pins like this have a capacity that far exceeds anything they're used with. The tow vehicle or ball mount would…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light…
view full answer...