Filter Products
Filter by Hitch Size Compatibility
$3.84 - $3.84
Videos
for Hitch Pins and Clips
Help Articles
for Hitch Pins and Clips
Expert Answers
for Hitch Pins and Clips
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hi Tom, For a single-bike rack with a true 2" shank I recommend the Kuat Piston SR Bike Rack for 1 Bike #KU88ZR. This bike rack is rated for use on all vehicles, 5th wheels, motorhomes, travel trailers, and flat towed vehicles so…
view full answer...The Hitch Pin and Clip For 2-1/2" and 3" Hitches #337HP6256WC doesn't have a weight rating, but this is normal for a pin setup. These are tested to hold the weight ratings of the hitches they are made for so as long as…
view full answer...The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the…
view full answer...Bill, we actually have the Hub/Drum Assembly #DX62KR which includes bearings, races and a grease seal to replace your 008-418-02. As for the brakes currently the Dexter Electric Trailer Brakes #K23-472-473-00 are our only 10" x…
view full answer...Trailer Hitch Pins like the Curt #C21500 do not have specific weight ratings and there is not a database available that will have this type of information. Generally speaking, a 5/8 inch diameter pin, which is designed for Class III, IV and V…
view full answer...No, it is not. The Roadmaster D-Ring Adapters item #RM-035 and item #RM-035-1 are only compatible with Roadmaster tow bars. There are no D-Ring adapters that work with the Curt Rambler Non-Binding Tow Bar item #C26FR.
view full answer...Hey Joseph, There's currently only one 2" trailer hitch receiver available for a 2024 Honda HR-V at this time with the EcoHitch Hidden Trailer Hitch Receiver #EH52KR. For the trailer wiring you'll need the Curt T-Connector…
view full answer...Hey Scott, so since you have a Dometic AC unit currently the replacement you'd want is the Advent Air part #ACDOM150 which was designed to replace Dometic units which means a really simple install that allows you to use current wiring and…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…
view full answer...Hey Greg, yes the Gen-Y Iron Grip Anti-Rattle Hitch pin part #GY99FR will work with the Curt ball mount you mentioned that was designed for 2-1/2 inch hitches.
view full answer...Hey John, we actually have a supplemental braking system that was designed specifically to be used with the Spartan K2 chassis you have that has the Safe Haul system with the Demco Air Force One Flat Tow Brake System part #DM54YV so this would be…
view full answer...