Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

The mounting holes are 2 inches on center for the clevis and 3 inches on center for the mount. The clevis and side of the bracket has holes that are 0.64 inch. The top and bottom holes of the mounting bracket are 0.48 inches and the center hole is…

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

The diameter of the mounting holes of the #T0897900 are 5/8 inch. We also have this as a kit with the channel and mounting bolts/nuts with part #T1812200.

The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Definitely! The distance between the tangs on the Gen-Y Clevis #325-GH-039 is exactly 1.95" when measured with calipers. I went ahead and attached a diagram of this measurement for your convenience. For a hitch pin to secure the clevis…

To replace either of the hitch balls that come with the Curt Deep Drop Adjustable 2-Ball Mount #C49NR you need the Curt Dual Ball Attachment #C69NR. The individual hitch balls aren't replaceable so you have the get the platform piece,…

The distance between the tangs on Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle #AMCC2 is 2 inches. I've attached a link to a video review of this product for you to take a look at.

That is a pretty good guess! The two position mounting channel in the #T1812200 is 3-1/2" wide x 7-1/2" tall as shown in the included diagram. I included a video review of the #T1812200 for you to take a look at.

I had the Demco 2-Tang Clevis - Adjustable Channel Mount #DM05593-97 measured and from end to end, it will be 9 1/4 inches long.

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.