Filter Products
Filter by Flag Style
$14.85 - $16.98
Videos
for Boat Flags
Help Articles
for Boat Flags
Expert Answers
for Boat Flags
Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll…
view full answer...The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…
view full answer...Yes, our part number #RM28GR and the Roadmaster 523222-5 and one and the same. We use our own unique part numbers for a lot of Roadmaster parts. The Roadmaster Direct-Connect Base Plate Kit #RM28GR (523222-5) will be the correct base plate for the…
view full answer...To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…
view full answer...There are a few things that you will need to know in order to choose the right disc brake kit for your 2003 DHM boat trailer. I assume you have idler hubs and are replacing your brakes so you already have a 4-bolt brake mounting flange #4-35 as well…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…
view full answer...You can absolutely install the Tekonsha T-One Vehicle Wiring Harness #118786 (which is indeed the correct harness for your 2018 Jeep JL Wrangler) on your vehicle that already has a Blue Ox Diode Kit installed for flat towing. The two kits won't…
view full answer...Jeffery, the skid plate on your 2021 Toyota 4Runner will need to be removed to install the Curt Front Mount Trailer Hitch Receiver #C31054. That info is actually already posted on the page, which I've attached for you to check out.
view full answer...The overall height of the UWS Truck Bed Chest #UWS01047 is 17-1/4 inches which is going to be shorter than the height of your truck bedrails so it will pretty easily fit underneath your tonneau cover. Now without knowing the length of your bed and…
view full answer...On a 12 inch brake assembly magnet, you should be getting 3.2 to 4 max amps at 12 to 13 volts. We have an FAQ article that covers testing brakes and brake magnets that should be helpful to you. I have included a link to it. Replacing the magnet is…
view full answer...There are a number of reasons why the brakes on your trailer may not be working. Lets start with the easiest things to check. First, check the vehicle and trailer connectors for corrosion. This can cause a short inside the connector and the brake…
view full answer...