Filter by Tool
$15.99 - $15.99
Videos
for Bike Tools
Help Articles
for Bike Tools
Expert Answers
for Bike Tools
We do carry a repair kit for the Dutton-Lainson DL-1602A trailer winch. You can use Winch Ratchet Repair Kit, #DL70455, as long as your winch was made after 1999. This kit will also fit DL1402A and DL1602ADD made after 1999.
view full answer...Since you have a Dometic AC unit the best option to replace it from Advent would be the part #ACDOM135 which was designed for this exact situation and would allow you an easy install since the electronics would plug right in.
view full answer...You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a…
view full answer...The RockyMounts HotRod Truck Bed Bike Carrier part #RKY1087 measures 3-1/4" tall.
view full answer...Unfortunately the Replacement Handlebar for Thule Chariot Cross, Lite, and Sport Bike Trailer/Strollers #TH24KH is not going to work with your Croozer Kid 2 Child Carrier. Since your Croozer has been discontinued for a quite a while I'd recommend…
view full answer...The Square Pipe Mount Swivel Jack #TJDP-7000-B uses the Replacement Pipe for etrailer and Ram Pipe Mount Swivel Jacks #TJP-OP58 which has a 2 inch inner diameter and 2-1/4 inch outer diameter. In the video the description is of the weld-on pipe mount…
view full answer...I checked with Fulton and the U-bolt part #FETC0101 that you referenced has an inner length of 9-1/8 inches and an inner width of 3-5/8 inches.
view full answer...I have a solution for you but you're going to need to weld on a pipe mount. There are no jacks available that will clamp onto your frame and give you that much of a lift. The clamps won't support that much extension. For that high of a lift…
view full answer...For your 2015 Volkswagen Jetta we have the trailer wiring harness part #118572 which is a confirmed fit. It installs by plugging inline with the taillight harnesses of the vehicle. I attached an install video for more info on this as well.
view full answer...The best setup for your 2022 Ford F-350 would be a B and W Turnoverball Rail Kit part #BWGNRK1116 which doubles as both a gooseneck ball hitch and a fifth wheel hitch rail kit and the Companion Hitch part #BWRVK3500 which fits this rail kit. This…
view full answer...The overall better route will be the B and W Companion Hitch part #BWRVK3500 as long as the vehicle has a B and W Gooseneck Turnoverball hitch installed. The Companion setup is often regarded as the nicest hitch around so whenever available I…
view full answer...Thanks for reaching out! You can definitely modify the Yakima 54" Tracks for Roof Racks #Y01127 by cutting them and installing them in different sections, yes. To complete this installation you'll need 2 more sets of the EndCaps #Y8810103…
view full answer...